1. Manuals
  2. Brands
  3. Open Manuals
  4. Network Router
  5. Open812L
  6. User manual

Open Open812L User Manual

Open networks 812l voip ata router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Copyright
Copyright© 2006 OPEN Networks Pty Ltd. All rights reserved. The content of this manual is subject to change
without notice. The information and messages contained herein are proprietary to OPEN Networks Pty Ltd. No part
of this manual may be translated, transcribed, reproduced, in any form, or by any means without prior written
permission by OPEN Networks Pty Ltd.
Disclaimer
For content and procedures available in this document, OPEN Networks Pty Ltd does not warrant or assume any
legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or
process disclosed.
Release: v.1.4.2
Date Released: September, 2006
U
s
e
r
G
U
s
e
r
G
8
1
2
L
V
o
I
P
A
T
A
8
1
2
L
V
o
I
P
A
T
A
u
i
d
e
u
i
d
e
R
o
u
t
e
r
R
o
u
t
e
r
September 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Open812L and is the answer not in the manual?

Questions and answers

Related Manuals for Open Open812L

Summary of Contents for Open Open812L

  • Page 1 September 2006 Copyright Copyright© 2006 OPEN Networks Pty Ltd. All rights reserved. The content of this manual is subject to change without notice. The information and messages contained herein are proprietary to OPEN Networks Pty Ltd. No part of this manual may be translated, transcribed, reproduced, in any form, or by any means without prior written permission by OPEN Networks Pty Ltd.

  • Page 2: Table Of Contents

    6.1.7 Call Log............................39 Configurations......................40 6.2.1 WAN Configuration ........................40 6.2.2 LAN & DHCP Configuration......................44 6.2.3 NAT Configuration ......................... 46 6.2.4 Port Forwarding ..........................50 6.2.5 Bridge Filtering..........................53 6.2.6 DNS Configuration......................... 55 OPEN Networks Pty Ltd www.opennw.com...
  • Page 3 10.1 Problems starting up the router................. 114 10.2 Problems Connecting to the Internet................. 114 10.3 Problems with the Telephone Line................114 11. Appendices........................115 11.1 Dial Plan Quick Reference Guide ................115 11.2 Glossary Table......................116 OPEN Networks Pty Ltd Page ii www.opennw.com...

  • Page 4: Getting Started

    User Guide Getting Started Introduction Congratulations on your purchase of the of the OPEN812L VoIP ATA router. The VoIP Analogue Telephone Adapter (ATA) product is a standard-based communication device that delivers true, next-generation voice-over-IP (VoIP) terminations to residential homes worldwide.

  • Page 5: Main Features & Benefits

    812L VoIP ATA router and the ATA provides both voice and tone to the POTS phone. The following table is a summary of the features and benefits of the OPEN 812L VoIP ATA Router. OPEN812L VoIP ATA Features/Benefits 2 x FXS Hardware Features...
  • Page 6 Single VPN Pass Through for IPSEC, L2TP, PPTP DMZ Support PPP Auto Reconnect Dynamic DNS Support Web Management Support FTP Management Support Transparent bridge support (routing) Easy Connect Firewall (NAT-based) Proven performance and reliability OPEN Networks Pty Ltd Page 5 www.opennw.com...

  • Page 7: Information About The Ata

    If the product has been dropped or damaged; If the product exhibits a distinct change in performance. SAVE THESE INSTRUCTIONS OPEN Networks Pty Ltd Page 6 www.opennw.com...

  • Page 8: Package Contents

    The OPEN 812L VoIP ATA Router contains the following items: OPEN 812L VoIP ATA Router User Guide CD RJ-11 ADSL/telephone Cable Ethernet (CAT-5) LAN Cable AC-DC power adaptor (12VDC, 800mA) Quick Start Guide OPEN Networks Pty Ltd Page 7 www.opennw.com...

  • Page 9: Appearance

    BLINKING The telephone connected to this port is off the hook. This port(s) is not registered to the Voice Service Provider (VSP). Contact your VSP to register for a phone line before installing the router. OPEN Networks Pty Ltd Page 8 www.opennw.com...

  • Page 10: Rear Panel Indicators

    PHONE 1 Connect an additional analogue phone to this port, if used. PHONE 2 All customized settings that you have saved will be lost upon resetting the VoIP ATA to default factory settings. OPEN Networks Pty Ltd Page 9 www.opennw.com...

  • Page 11: Connecting The Ata Router

    These are examples of how to use your OPEN 812L VoIP ATA router. It is recommended to check your network components and ensure that your PC or Notebook has an Ethernet port. OPEN Networks Pty Ltd Page 10 www.opennw.com...

  • Page 12: Single-User Connection Via Adsl

    Step 5: cable(s). The following diagram shows a typical single-user connection. Figure 3-1: Connection via ADSL Before you connect to the OPEN 812L VoIP ATA router, you need to have an ADSL modem. OPEN Networks Pty Ltd Page 11 www.opennw.com...

  • Page 13: Single-User Cable Connection

    Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone Step 5: cable(s). The following shows a typical single-user cable connection. Figure 3-2: Single-User Connection via Cable Before you connect to the ATA, you need to have a Cable modem. OPEN Networks Pty Ltd Page 12 www.opennw.com...

  • Page 14: Single-User Company Network Connection

    Connect a phone cable to the LINE (Lifeline) port if using as a backup. Step 4: Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone cable Step 5: (RJ-11). Figure 3-3: Single-User Company Network Connection OPEN Networks Pty Ltd Page 13 www.opennw.com...

  • Page 15: Multiple-Users Connection Via Adsl

    Connect a phone cable to the LINE (Lifeline) port if using as a backup. Step 5: Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone cable Step 6: (RJ-11). Figure 3-4: Multiple Users Connection Via ADSL OPEN Networks Pty Ltd Page 14 www.opennw.com...

  • Page 16: Pc Network Configuration

    Click Start/Control Panel (in Classic View). From the Control Panel window, double- Step 1: click Network Connections. The following appears: Double-click the Local Area Network connection name required. The following Step 2: appears: Click Properties. The following appears: Step 3: OPEN Networks Pty Ltd Page 15 www.opennw.com...
  • Page 17 Step 4: OK button. The following appears: Ensure the Obtain an IP address automatically and the Obtain DNS server address Step 5: automatically radio buttons. Click the OK button to complete the configuration. OPEN Networks Pty Ltd Page 16 www.opennw.com...

  • Page 18: Configuring Computers In Windows 2000

    Dial-up Connections. The following appears: Double-click the Local Area Network connection name required. The following Step 2: appears: From the Local Area Connection Status window, click Properties. The following Step 3: appears: OPEN Networks Pty Ltd Page 17 www.opennw.com...
  • Page 19 Highlight Internet Protocol (TCP/IP) and click Properties. The following appears: Step 4: Highlight the Obtain an IP address Automatically and the Obtain DNS Server Step 5: Address Automatically radio buttons. Click the OK button to complete the configuration. OPEN Networks Pty Ltd Page 18 www.opennw.com...

  • Page 20: Configuring Computers In Windows 95/98/Me

    Highlight the IP Address tab to make it active, then highlight the Obtain an IP Step 3: address automatically radio button. Highlight the DNS Configuration tab to make it active. The following appears: Step 4: OPEN Networks Pty Ltd Page 19 www.opennw.com...
  • Page 21 OPEN 812L VoIP ATA Router User Guide Highlight the Disable DNS radio button, then click OK to complete the configuration. Step 5: OPEN Networks Pty Ltd Page 20 www.opennw.com...

  • Page 22: Configuring Computers In Windows Nt4.0

    Highlight TCP/IP Protocol, then click Properties. The following appears: Step 2: Highlight the Obtain an IP address from a DHCP Server radio button. Click the OK Step 3: button to complete the configuration. OPEN Networks Pty Ltd Page 21 www.opennw.com...

  • Page 23: Factory Default Settings

    WAN Port 192.168.10.1 IP address 255.255.255.0 Subnet Mask The WAN port is the DHCP Enabled DHCP server function Client. 100 IP addresses continuing from IP addresses for 192.168.10.100 through distribution to PCs 192.168.10.199 OPEN Networks Pty Ltd Page 22 www.opennw.com...

  • Page 24: Configuring With Your Web Browser

    Step 3: For more information about the Overall Status details, please refer to Chapter 6: Basic Configuration under the Overall Status section. Congratulations! You have now successfully logged onto the OPEN812L VoIP ATA router! OPEN Networks Pty Ltd Page 23...

  • Page 25: Setup Via Web Interface

    Step 2: Voice Service Provider for Phone 1 Step 3: Voice Service Provider for Phone 2 Please refer to the following sections of this manual for detailed instructions on how to setup the OPEN 812L VoIP ATA Router. OPEN Networks Pty Ltd Page 24 www.opennw.com...

  • Page 26: Network Selection

    VSP. Refer to the image provided below. Click the Proceed to Step 2 button to configure Step 2. To remove the selections Step 3: made, click the Cancel button and re-select your options. OPEN Networks Pty Ltd Page 25 www.opennw.com...

  • Page 27: Voice Service Provider Phone 1 & 2

    If you wish to add an additional VSP by clicking the Add New Provider button, enter Step 2: all the mandatory fields as shown below. If you have not selected this option, proceed to Step 4. OPEN Networks Pty Ltd Page 26 www.opennw.com...
  • Page 28 Next, select the User Profile option. If you have no users added yet, click the Add Step 5: New User button as displayed in Step 1. You may add up to 4 users to the User Profile. OPEN Networks Pty Ltd Page 27 www.opennw.com...
  • Page 29 Click the Proceed to Step 3 button to go to the next step. Step 9: Step 10: The Step 3: Voice Service Provider (Phone 2) screen appears: Step 11: Enter the mandatory fields for Phone 2, if applicable. If there are no more accounts to OPEN Networks Pty Ltd Page 28 www.opennw.com...
  • Page 30 Finish button to save your configuration. Step 12: At the Saving Configuration page, please wait for approximately 30 seconds for the process to be completed. Step 13: Upon completion, the Overall Status page appears. OPEN Networks Pty Ltd Page 29 www.opennw.com...
  • Page 31 STUN stands for Simple Traversal of UDP through NATs. This is Enable STUN defaulted to Disable and is optional. This parameter holds the Display Name as it should appear on Display Name (Add the Caller ID. New User) OPEN Networks Pty Ltd Page 30 www.opennw.com...

  • Page 32: Basic Configuration

    Step 1: side of the page. Click the Overall Status link located on the left menu. The following appears: Step 2: The Overall Status screen is in read-only mode and meant for diagnostics purposes. OPEN Networks Pty Ltd Page 31 www.opennw.com...
  • Page 33 Displays the WAN interface IP address assigned to your WAN Statistic router. Displays the number of computers connected to the router LAN Statistic and the LAN interface IP address assigned to the computers. OPEN Networks Pty Ltd Page 32 www.opennw.com...

  • Page 34: Lan Status

    The following table provides a brief description of the items on the LAN Status screen. Label Name Description Displays the DHCP client table with the assigned IP Number of Ethernet Devices addresses and MAC addresses. Connected to the DHCP Server OPEN Networks Pty Ltd Page 33 www.opennw.com...

  • Page 35: Dhcp Client Status

    Displays the IP address of the DHCP client. IP Address Displays the assigned network and broadcast addresses. Net Mask Displays the IP address of the gateway server Gateway Displays the DNS IP addresses. DNS 1, DNS 2, DNS 3 OPEN Networks Pty Ltd Page 34 www.opennw.com...

  • Page 36: Ppp Status

    PPP X Does Not Exist! - This is displayed when a Connect or Disconnect attempt is made on a session number that does not exist. Cable modem users are not able to connect using this option. OPEN Networks Pty Ltd Page 35 www.opennw.com...

  • Page 37: Tcp Status

    Click the TCP Status link located on the left menu. The following page appears: Step 2: To reset the counters to start from '0', click the Reset Counters button to clear all the Step 3: attributes. OPEN Networks Pty Ltd Page 36 www.opennw.com...
  • Page 38 Bytes, Out of Order Packets and Out of Order Bytes. Displays the number of discarded packets with Bad Discarded Packets Checksum, Bad Offset Header and Too Short. Displays the number of connections that are Initiated, Connections Accepted, Established and Closed. OPEN Networks Pty Ltd Page 37 www.opennw.com...

  • Page 39: System Log

    Allows you to save the current contents of the logged Click Here Link messages into a text file onto your local drive. Click on the link and select “Save Target As” to save it to a text file. OPEN Networks Pty Ltd Page 38 www.opennw.com...

  • Page 40: Call Log

    Click the Call Log link located on the left menu. The following page appears: Step 2: Click the Clear Log button to clear the logged calls. Step 3: To refresh the logged calls, click the Refresh button. Step 4: OPEN Networks Pty Ltd Page 39 www.opennw.com...

  • Page 41: Configurations

    Click the WAN link located on the left menu. The following page appears: Step 2: To set up the WAN configuration, refer to the table below to populate each of the Step 3: fields. OPEN Networks Pty Ltd Page 40 www.opennw.com...
  • Page 42 DHCP client, where the VSP would be the DHCP Server. The default is set to DISABLED. DHCP clients are generally used in the following encapsulations: 1483 Bridged IP LLC 1493 Routed IP LLC 1483 Bridged IP VC-MUX OPEN Networks Pty Ltd Page 41 www.opennw.com...
  • Page 43 TCP will send in a single, un-fragmented IP packet. The LAN client and the WAN host will indicate their MSS during the TCP connection handshake. The range for the MSS field is 0-32767 and the default value is 1432. OPEN Networks Pty Ltd Page 42 www.opennw.com...
  • Page 44 Click the Submit button to save the changes made. Submit Click the Save Settings this link to select from 2 options: Save Save Settings Settings/Reboot or Reboot Only. Refer to Section 6.2.8 for more information. OPEN Networks Pty Ltd Page 43 www.opennw.com...

  • Page 45: Lan & Dhcp Configuration

    Ensure that when you change the LAN Settings of the router, you need to reset/renew the local computer IP addresses. When enabled, the router will provide IP address to the DHCP Server computers connected to the router. OPEN Networks Pty Ltd Page 44 www.opennw.com...
  • Page 46 Click the Submit button to submit the changes made. Submit Click the Save Settings this link to select from 2 options: Save Settings Save Settings/Reboot or Reboot Only. Refer to Section 6.2.8 for more information. OPEN Networks Pty Ltd Page 45 www.opennw.com...

  • Page 47: Nat Configuration

    To access NAT, click the Basic link located at the top-right hand side of the page. Step 1: Click the NAT link located on the left menu. The following page appears: Step 2: OPEN Networks Pty Ltd Page 46 www.opennw.com...
  • Page 48 Dynamic NAPT. You may find a full description of each option in the table below. Click the Advanced NAT Configuration link to open the Advanced NAT Step 5: Configuration screen. This function allows you to set the configuration for session name, available session and manual NAT configuration. OPEN Networks Pty Ltd Page 47 www.opennw.com...
  • Page 49 (NxN). This is the default setting. A home office with the following characteristics will typically use Dynamic NAPT configuration: - a single global IP address (whether static or dynamic); - multiple host workstations (PCs, laptops) connected to the home LAN OPEN Networks Pty Ltd Page 48 www.opennw.com...
  • Page 50 Interfaces. This field displays the total number of NAT Sessions Number of NAT Configurations entered. NAT allows only one entry (User IP) per session, while NAPT allows many entries (User IPs) per session. OPEN Networks Pty Ltd Page 49 www.opennw.com...

  • Page 51: Port Forwarding

    Click the Port Forwarding link located on the left menu. The following page appears: Step 2: The ID field is an automatically generated sequential number that begins with ‘1’. To Step 3: set up Port Forwarding Configuration, enter the Start Port number. OPEN Networks Pty Ltd Page 50 www.opennw.com...
  • Page 52 Step 7: Use the Delete This Setting button if the configuration is incorrect or no longer Step 8: required. Click the Save Settings link for the configuration settings to take effect. Step 9: OPEN Networks Pty Ltd Page 51 www.opennw.com...
  • Page 53 Virtual Server entries just for the ports your application requires, instead of using DMZ. As a result all connections from the WAN will attempt to access the public IP of the DMZ computer specified. OPEN Networks Pty Ltd Page 52 www.opennw.com...

  • Page 54: Bridge Filtering

    Select Block or Forward for the Filtering Action. Step 4: Enter the Source MAC field. This field must consist of 12 hexadecimal characters. Step 5: Enter the Destination MAC field. This field must consist of 12 hexadecimal Step 6: characters. OPEN Networks Pty Ltd Page 53 www.opennw.com...
  • Page 55 Destination MAC must consist of 12 hexadecimal characters. Enter the hexadecimal number for the Ethernet type field Type in Ethernet II packets. For example, 0800 is for IP protocol. The Type must consist of 4 hexadecimal characters. OPEN Networks Pty Ltd Page 54 www.opennw.com...

  • Page 56: Dns Configuration

    Enter the URL Name of the DNS Server. Step 8: Enter the Host ID or IP Address of the DNS Server in the Host IP field. Step 9: Step 10: Click the Apply button to apply the changes made. OPEN Networks Pty Ltd Page 55 www.opennw.com...
  • Page 57 This is a table of all DNS server IP addresses. DNS Proxy Setting This is a table of all DNS sever URL names. DNS Server Setting Click the Save Configuration link to save the settings. Save Configuration OPEN Networks Pty Ltd Page 56 www.opennw.com...

  • Page 58: Dynamic Dns

    (Dynamic DNS), custom or static. Enter the Username and Password. Step 6: Enter the Host Name field. Five boxes are provided from 0 to 4. Step 7: Click the Apply button to save your settings. Step 8: OPEN Networks Pty Ltd Page 57 www.opennw.com...

  • Page 59: Save Settings / Reboot

    Save/reboot in progress, please wait….” The second screen follows with “Your settings have been saved and the device has rebooted. Done”. Your settings have been saved and the router has been rebooted. OPEN Networks Pty Ltd Page 58 www.opennw.com...
  • Page 60 ‘Your settings have been saved and the modem has rebooted. Done’ will appear. This function basically reboots the OPEN 812 VoIP ATA Reboot only router and does not save configuration changes. OPEN Networks Pty Ltd Page 59 www.opennw.com...

  • Page 61: Advanced Configuration

    Bridge Timeout RIP Config DMZ Config SNTP Config Misc Config Admin Password Reset to Default Firmware Upgrade Auto Update Save/Reboot A brief description of each of the configurations is discussed in the following sections. OPEN Networks Pty Ltd Page 60 www.opennw.com...

  • Page 62: Advanced Voip

    Select your VSP from the Service Provider To Use list box. If there are no service Step 4: providers on the list, click the Update Service Provider Configuration link to add a new service provider as shown below. OPEN Networks Pty Ltd Page 61 www.opennw.com...
  • Page 63 Select from the Login Account To Use list box from the user account details. If Step 6: there is no user accounts set up as yet, click the Update User Login Account Configuration link as shown below. OPEN Networks Pty Ltd Page 62 www.opennw.com...
  • Page 64 User Profile section of this user guide. Click the Submit button to submit the changes made. Step 8: Click the Save Settings button to save the changes made. Step 9: OPEN Networks Pty Ltd Page 63 www.opennw.com...
  • Page 65 Click the Submit button to submit the changes made. Submit Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 64 www.opennw.com...

  • Page 66: Service Provider Configuration

    To configure the remaining fields, refer to the table provided below. Step 6: Click the Submit button to complete the configuration. Step 7: To save the settings, click the Save Settings button. Step 8: OPEN Networks Pty Ltd Page 65 www.opennw.com...
  • Page 67 This parameter informs the port of the registrar on which it Registrar Port will listen for Registrar requests from the OPEN 812L VoIP ATA router. OPEN Networks Pty Ltd Page 66 www.opennw.com...
  • Page 68 Click the Submit button to submit the changes made. Submit Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 67 www.opennw.com...

  • Page 69: User Profile

    Setup of your router, as per Step 2: Voice Service Provider (Phone 1) page. Refer to the following table for a detailed description of the fields on the User Profile Step 5: page. OPEN Networks Pty Ltd Page 68 www.opennw.com...
  • Page 70 Settings/Reboot page. Refer to Section 7.2.12 for more information. The maximum number of login accounts you can add is 4 per service provider and there must be at least 1 login account per service provider available. OPEN Networks Pty Ltd Page 69 www.opennw.com...

  • Page 71: Fxo Configuration

    PSTN dial tone to be detected after (secs) you have pressed the Hook Flash/recall button. In case the dial tone is not detected or there is a timeout, a fast busy tone will be heard. OPEN Networks Pty Ltd Page 70 www.opennw.com...
  • Page 72 Click the Submit button to submit the changes made. Submit Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 71 www.opennw.com...

  • Page 73: Ata Timer Configuration

    The fields on this page are defaulted to the timings displayed above. To change the Step3: timings for any of the fields, simply enter the new time in seconds and click the Submit button. OPEN Networks Pty Ltd Page 72 www.opennw.com...
  • Page 74 Click the Submit button to submit the changes made. Submit Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 73 www.opennw.com...

  • Page 75: Ringtone Configuration

    Click the down-arrow of the Region list box, and select Australia. Step 3: Click the Submit button to complete the configuration. Step 4: To save the settings, click the Save Settings button. Step 5: OPEN Networks Pty Ltd Page 74 www.opennw.com...

  • Page 76: Ata Miscellaneous Configuration

    Click Misc Configuration on the left menu. The ATA Misc Configuration page Step 2: appears: The default settings for the various sections are shown as above. You may make Step 3: changes to the current settings to configure your router. OPEN Networks Pty Ltd Page 75 www.opennw.com...
  • Page 77 Yes Alive otherwise select No. The Keep Alive interval in seconds to be used when STUN is Keep Alive not enabled. Period Click the Submit button to submit the changes made. Submit OPEN Networks Pty Ltd Page 76 www.opennw.com...
  • Page 78 OPEN 812L VoIP ATA Router User Guide Field Definition Click the Save Settings link and that takes you to the Save Settings/Reboot Save Settings page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 77 www.opennw.com...

  • Page 79: Address Book Configuration

    Enter the Port Number using the SIP port number on which the remote end will Step 7: receive the call. This field is useful when you want to specify non-telephone number entries, where the call can be made directly without going through the configured OPEN Networks Pty Ltd Page 78 www.opennw.com...
  • Page 80 1. The above parameters are specific to the endpoint selected in the ATA Configuration page. 2. Up to ten addresses book entries can be added per endpoint. 3. Address book entries addition/deletion/editing do not need a Save and Reboot. The changes are reflected immediately. OPEN Networks Pty Ltd Page 79 www.opennw.com...

  • Page 81: Auto-Provisioning

    OPEN 812L VoIP ATA Router User Guide 7.1.9 Auto-Provisioning Auto-Provisioning allows VSPs to update the OPEN 812L VoIP ATA router's configuration automatically. This functionality is dependent on any changes from you VSP. OPEN Networks Pty Ltd Page 80 www.opennw.com...

  • Page 82: Admin Privileges

    Click Route Table on the left menu. The following page appears: Step 2: To set up the configurations for the Route Table, please refer to the table provided Step 3: of the field definitions and the available options for your configurations. OPEN Networks Pty Ltd Page 81 www.opennw.com...
  • Page 83 Click the Submit button to save the changes made. Submit Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 82 www.opennw.com...

  • Page 84: Route Configuration

    Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. This field displays the static route entries submitted by the Manually Configured user. Routes OPEN Networks Pty Ltd Page 83 www.opennw.com...

  • Page 85: Bridge Timeout

    The range for the Aging Timeout field is 0 - 32767. The default is set to 300. Click the Submit button to complete the configuration. Step 4: OPEN Networks Pty Ltd Page 84 www.opennw.com...

  • Page 86: 7.2.4 Rip System Wide Configuration

    The RIP messages that can be received and processed are based on two configuration parameters: RIP Version number and Multicast: Version Multicast Announcements Sent V2-BC V2-MC Follow the steps below to access and configure the RIP System WIde Configuration page. OPEN Networks Pty Ltd Page 85 www.opennw.com...
  • Page 87 The range for Garbage Timeout is from 0 - 2147483647. The default is set to 120. Click the Submit button to complete the configuration. Step 7: To save the settings, click the Save Settings button. Step 8: OPEN Networks Pty Ltd Page 86 www.opennw.com...
  • Page 88 To configure the Interface and view Current RIP Settings, click the Advanced Step1: Configuration link provided. The RIP Per Interface Configuration page appears: Step 2: Refer to the following table to configure the fields on this screen. Step 3: OPEN Networks Pty Ltd Page 87 www.opennw.com...
  • Page 89 The listener receives the RIPv1 only. Listener The listener receives the RIPv2 only. This listener receives the both RIPv1 and RIPv2. V1 + V2 This field displays the each interface’s RIP status. Current RIP Settings OPEN Networks Pty Ltd Page 88 www.opennw.com...

  • Page 90: Dmz Configuration

    Click the Apply button to apply the settings made. Step 5: Click the Reset button to refresh the page. Re-enter the fields as required. Step 6: Click the Save Settings link to save the changes made. Step 7: OPEN Networks Pty Ltd Page 89 www.opennw.com...

  • Page 91: Sntp Configuration

    Click the Save Settings link to save the changes made. Step 7: When the OPEN 812L ATA router is successfully connected to the SNTP server, the system log will reflect the updated time. Refer to the screen image example below. OPEN Networks Pty Ltd Page 90 www.opennw.com...

  • Page 92: Miscellaneous Configuration

    Click Misc Config on the left menu. The Miscellaneous Configuration page Step 2: appears: Refer to the table below to configure the fields on this page. Step 3: OPEN Networks Pty Ltd Page 91 www.opennw.com...
  • Page 93 Click the Submit button to save the changes made. Submit Click the Save Settings link and that takes you to the Save Save Settings Settings/Reboot page. Refer to Section 7.2.12 for more information. OPEN Networks Pty Ltd Page 92 www.opennw.com...

  • Page 94: Admin / Username Password Configuration

    Enter your new password again into the Retype Password field. Step6: Click the Submit button to complete the configuration. Step 7: To save the settings, click the Save Settings button. Step 8: OPEN Networks Pty Ltd Page 93 www.opennw.com...

  • Page 95: Reset To Default

    Click Reset to Default on the left menu. The following page appears: Step 2: Click the Restore button to restore the settings. The following screen appears. Step 3: Please wait a few minutes until the factory settings have been restored. OPEN Networks Pty Ltd Page 94 www.opennw.com...

  • Page 96: Firmware Update

    Enter the path of the file in the text box as shown below or click the Browse button Step 4: to locate the file. For example, 'C:/firmware.dlf'. OPEN Networks Pty Ltd Page 95 www.opennw.com...
  • Page 97 Do not turn off your router when the upgrade is being processed. Click the Cancel Update button to stop the update from being updated. The Step 6: configuration will be restored. Wait a few moments until this process is completed. OPEN Networks Pty Ltd Page 96 www.opennw.com...

  • Page 98: Auto Update

    There are three options for the Download Mode (as shown in the image below): Disabled, Download After Reboot and Download at Timed Intervals. This functionality is dependent on any updates from you VSP. OPEN Networks Pty Ltd Page 97 www.opennw.com...

  • Page 99: Save / Reboot

    Click Save & Reboot button if you wish to apply all changes. Two different Step 3: pages/screens will appear. The first one states that: “Your settings are being saved and the device is being rebooted. Save/reboot in progress, please wait….” OPEN Networks Pty Ltd Page 98 www.opennw.com...
  • Page 100 Two different pages/screens will appear after pressing this button. Two pages will appear after pressing this button. The first screen states: “The device is being rebooted. Reboot in progress, please wait….” The second screen follows with “The modem is being rebooted. Done.” OPEN Networks Pty Ltd Page 99 www.opennw.com...

  • Page 101: Log Off

    The Log Off button allows you to log out of the router completely. It is located at the top right- hand menu. To log out, click the Log Off button on the top menu. A confirmation message Step 1: appears: Click the OK button to close the window. Step 2: OPEN Networks Pty Ltd Page 100 www.opennw.com...

  • Page 102: Making Phone Calls

    (push button) on the phone cradle or quickly press and release the flash button or other dedicated key/button on the telephone base unit or handset, depending on the other telephone. OPEN Networks Pty Ltd Page 101 www.opennw.com...

  • Page 103: Caller Id

    The OPEN 812L VoIP ATA router plays the first Call Waiting tone, and then sends the name, telephone number, time and date information (if they are available) before the second Call Waiting tone is played. OPEN Networks Pty Ltd Page 102 www.opennw.com...

  • Page 104: 9.3.3 Consultation Hold

    Step 2: When you are finished with the second call, perform a hook flash/recall to revert to Step 3: the first party. You can also alternate between calls by performing a hook flash/recall. OPEN Networks Pty Ltd Page 103 www.opennw.com...

  • Page 105: Blind Transfer

    You may include an optional hash (#) at the end of the number. When you hear the Fast Busy Tone, hang up your phone. Step 4: OPEN Networks Pty Ltd Page 104 www.opennw.com...

  • Page 106: Attended Transfer

    When the target transfer answers the phone, you may consult with the target Step 3: transfer and then hang up your phone to transfer the call to the target transfer. OPEN Networks Pty Ltd Page 105 www.opennw.com...

  • Page 107: 3-Way Conferencing

    Step 4: To drop the second call, perform a hook flash/recall after entering into conferencing Step 5: mode. If you hang up during conferencing, both the other parties will be disconnected from the call. OPEN Networks Pty Ltd Page 106 www.opennw.com...

  • Page 108: Call Waiting

    When the sequence of digits *70 is entered, the sequence could match the Call- Waiting rule or the Default Number Call rule. To execute the command immediately, press #. Otherwise, the action will execute after 4 seconds. OPEN Networks Pty Ltd Page 107 www.opennw.com...

  • Page 109: Call Forwarding

    Call Forwarding When Busy - Forwards incoming calls only when the line is busy; Call Forwarding on No Answer - Forwards incoming calls only when the telephone is not answered after the configured period. OPEN Networks Pty Ltd Page 108 www.opennw.com...
  • Page 110 If you entered a number to forward the call to, the OPEN 812L VoIP ATA router will Step 3: attempt to call that number. Once you disconnect the attempted call, in subsequent call attempts, you will hear the stutter dial tone indicating that Unconditional Call Forwarding is enabled. OPEN Networks Pty Ltd Page 109 www.opennw.com...
  • Page 111 Cancel Unconditional Call Forwarding, Cancel Call Forwarding on Busy, Cancel Call Forwarding on No Answer or the Default Number Call rule. To execute the command immediately, press #. Otherwise, the action will execute after 4 seconds. OPEN Networks Pty Ltd Page 110 www.opennw.com...

  • Page 112: 9.3.9 Call Return

    When the sequence of digits *69 is entered, the sequence could match Call Return or the Default Number Call rule. To execute the command immediately, press #. Otherwise, the action will execute after 4 seconds. OPEN Networks Pty Ltd Page 111 www.opennw.com...

  • Page 113: Ip Dialing

    When the sequence of digits *47 is entered, the sequence could match IP Dialing rule or the Default Number Call rule. To execute the command immediately, press #. Otherwise, the action will execute after 4 seconds. OPEN Networks Pty Ltd Page 112 www.opennw.com...

  • Page 114: Speed Dialling For Address Book Entries

    If the address book contains only one phone number, the call will be made through the configured proxy server. If the entire URL is present in the address book, the call will be treated as an IP-dialled call. OPEN Networks Pty Ltd Page 113 www.opennw.com...

  • Page 115: Troubleshooting

    If you configured a SIP account to receive calls on only one of receive VoIP calls the telephone ports, make sure your telephone is connected to that port. Cannot make or Check that all the cables are connected correctly. receive PSTN calls OPEN Networks Pty Ltd Page 114 www.opennw.com...

  • Page 116: Appendices

    Enable Call Forwarding on No Answer Temporary Disable Call Waiting Call Return Blind Transfer IP Dialling Speed Dialling from Address Book PSTN Call Disable Call Forwarding on Busy Disable Call Forwarding on No Answer OPEN Networks Pty Ltd Page 115 www.opennw.com...

  • Page 117: Glossary Table

    Intrusion Detection System IGMP Internet Group Management Protocol IMAP Internet Message Access Protocol Internet Protocol IPCP Internet Protocol Control Protocol IPoA Internet Protocol over ATM Local Area Network Link Control Protocol Light Emitting Diode OPEN Networks Pty Ltd Page 116 www.opennw.com...
  • Page 118 Simple Network Time Protocol Stateful Packet Installation SSID Service Set Identification STUN Simple Traversal of UDP through NATs TCP/IP Transfer Control Protocol/Internet Protocol TFTP Trivial File Transfer Protocol TKIP Temporal Key Integrity Protocol Type of Services OPEN Networks Pty Ltd Page 117 www.opennw.com...
  • Page 119 VLAN Virtual Local Area Network VoIP Voice Over Internet Protocol Virtual Path Identifier Voice Service Provider Wide Area Network Wireless Distribution System Wireless Equivalent Privacy WLAN Wireless Local Area Network Wi-Fi Protected Access OPEN Networks Pty Ltd Page 118 www.opennw.com...

Table of Contents