Subscribe to Our Youtube Channel
Summary of Contents for Waukesha PTC2
- Page 1 INSTRUCTION MANUAL 2ND GENERATION Positive Temperature Coefficient (PTC2) Heater Manual PTC2-MANUAL 1.3 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT.
-
Page 2: Table Of Contents
Page 2 Construction Page 2 Selection Pages 2-4 Installation Pages 4-6 Troubleshooting Page 6 Appendices Page 6-10 ® PTC2 Heater Systems are manufactured and distributed by Waukesha Service & Components, a division of SPX Transformer Solutions, Inc. PTC2-Manual Rev. 1.3, 04/2013... -
Page 3: General System Description
The system offers unparalleled reliability due to the elimination of a thermostat or other controls. In addition, standard PTC2 convection heaters utilize an integrated fan assembly that ensures even heat distribution throughout the enclosure. -
Page 4: Selection Pages
Chart 1 – Heater Output Degrees C Wattage at Corresponding Ambient Temperatures 200 Watt 300 Watt 400 Watt ® PTC2 Heater Systems are manufactured and distributed by Waukesha Service & Components, a division of SPX Transformer Solutions, Inc. PTC2-Manual Rev. 1.3, 04/2013... -
Page 5: Electrical Connections
POSITIVE TEMPERATURE COEFFICIENT (PTC2) HEATER MANUAL SELECTION (continued) HIGH RECOVERY MODELS High recovery heaters operate as standard PTC2 heaters with the addition of a changeover to 400 watt operation at colder temperatures (see Chart 4 on page 7). TEMPERATURE ACTIVATED MODELS Temperature activated heaters operate as standard PTC2 heaters except the heater deactivates at higher ambient conditions (see Chart 4 on page 7). -
Page 6: Installation Pages
POSITIVE TEMPERATURE COEFFICIENT (PTC2) HEATER MANUAL INSTALLATION (continued) HEATHER FUSING PTC2 heaters do not include fuse protection and should be fused at the wiring supply source. Inrush curves are shown in Charts 2 and 3 below: Suggested MCB Rating: 6A Type B Suggested Fuse Rating: 6.3A Type (T) Time Delay... -
Page 7: Troubleshooting
TROUBLESHOOTING THE FAN OR HEATER IS NOT OPERATING Confirm that the voltage input to the PTC2 assembly is the correct voltage. Check heater assembly terminals at the power harness quick-connect plug. - Page 8 CONVECTION PTC HEATERS L, M SERIES H, J, K SERIES Chart 4 – PTC2 Heater Inlet Temperature vs. Wattage Output ® PTC2 Heater Systems are manufactured and distributed by Waukesha Service & Components, a division of SPX Transformer Solutions, Inc.
- Page 9 POSITIVE TEMPERATURE COEFFICIENT (PTC2) HEATER MANUAL APPENDECIES (continued) Figure 3 – PTC2 Part Number Configuration ® PTC2 Heater Systems are manufactured and distributed by Waukesha Service & Components, a division of SPX Transformer Solutions, Inc. PTC2-Manual Rev. 1.3, 04/2013...
- Page 10 POSITIVE TEMPERATURE COEFFICIENT (PTC2) HEATER MANUAL APPENDECIES (continued) Figure 4 – Fan Forced PTC2 Dimensions ® PTC2 Heater Systems are manufactured and distributed by Waukesha Service & Components, a division of SPX Transformer Solutions, Inc. PTC2-Manual Rev. 1.3, 04/2013...
-
Page 11: Replacement Parts And Service
POSITIVE TEMPERATURE COEFFICIENT (PTC2) HEATER MANUAL APPENDECIES (continued) Figure 5 – 30 to 60 Watt Convection PTC2 Dimensions Figure 6 – 20 to 40 Watt Convection PTC2 Dimensions REPLACEMENT PARTS AND SERVICE Please contact us at 800-338-5526 for replacement parts and/or service. Or visit us online at www.waukeshacomponents.com.
Need help?
Do you have a question about the PTC2 and is the answer not in the manual?
Questions and answers