ASCOM VoWiFi System System Description page 35

System Description
Ascom VoWiFi System
System Installation (SI)
Primarily explains system-dependent aspects to be considered at system installation and
gives an overview of how to install the system.
Target groups: technical engineers planning the system and technicians installing it.
Function Description (FD)
Gives all relevant information, requirements, and configuration notes concerning functions
in system and products, for example positioning, interactive messaging etc.
Target groups: see under System Description section.
Configuration Manual (CM)
Describes the complete configuration for a specific product.
Target groups: installation-, service-, support technicians and system responsible.
Configuration Notes (CN)
Describes required configuration for two or more interconnected products to achieve best
performance or specific functions. Is a complement to other product specific documents.
Target groups: installation-, service-, support technicians and system responsible.
Troubleshooting Guide (TG)
The document provides information that can be useful when analyzing problems in a
product or in a system.
Target groups: installation-, service-, support technicians and system responsible.
Data Sheet (DS)
Technical data of a software/products etc. It includes a short list of features, applications,
and possibly extended functions with other software/products.
Target groups: end customer, system responsible, technical engineers and sales
department.
Installation Guide (IG)
Describes how to install any fixed units in the system.
Target groups: installation- and service personnel.
Installation and Operation Manual (IOM)
Describes how to install and operate different PC software programmes. In many cases
complemented with or replaced by on-line help or CD.
Target groups: service engineer or administration responsible of the end user system.
Quick Reference Guide (QRG)
This document is available for Portable Devices only. It contains a concise, how to use
description, and is normally distributed together with the Portable Device.
Target groups: user of the portable device for quick learning of included functions.
User Manual (UM)
For Portable Devices:
Is a complement to the QRG. It gives a thorough description of the specific functions and
how to use the product, for example a Transceiver.
Target groups: responsible for handling the administration and distribution of pocket units
at the end customer site, or anyone interested to get deeper usage knowledge.
For PC Software:
If it is preferable to separate installations and operations, a UM describes how the end user
operates the software.
In many cases UM is complemented with on-line help.
Target groups: End user.
7 September 2011 / Ver. G
TD 92313EN
33