Advertisement
Completing
G
Installation:
Need
H
Assistance?
Part No. 3952817 Rev. B
© 2001 Whirlpool Corporation
18.
CHECK ELECTRICAL
REQUIREMENTS. BE SURE YOU
HAVE CORRECT ELECTRICAL
SUPPLY AND RECOMMENDED
GROUND METHOD.
(Step 13)
(Step 7)
(Step 6)
(Step 4)
19.
Check that all parts are
now installed. If there is an extra
part, go back through steps to see
which step was skipped.
Call your dealer or local authorized
service company.
When you call, you will need the
washer model number and serial
number. Both numbers are on the
model/serial rating plate located
under the washer lid and on the top
of the washer.
Benton Harbor, Michigan 49022
20.
Turn on water faucets
and check for leaks. Tighten
couplings if there is leaking. DO
NOT OVERTIGHTEN; this could
cause damage to couplings.
21.
Check that you have all
of your tools. Check that the yellow
shipping strap was removed from the
back of the washer and used to
secure the drain hose.
22.
Plug power supply cord
into grounded outlet.
23.
Read the Use and Care
Guide. Start the washer and allow it
to complete the regular cycle.
Congratulations!
You have successfully installed
your new washer. To get the
most efficient use from your
new washer, read your Use and
Care Guide.
Keep Installation Instructions
and Guide.
Printed in U.S.A.
Advertisement
