Zonton 999 Professional User Manual page 4

QUICK-OPERATION GUIDE
Function
[FUNC](1 second)+[4]
Wide/Narrow Band
Choose wide/narrow
Channel
Mode. [FUNC](1 second)+[C]
Copy Channel
Rotate[Circumrotate
choose channel, press
Frequency
[FUNC] (1
Save Channel
Rotate [ Circumrotate
choose channel,
Channel Mode and Frequency+Channel
Mode. [FUNC](1
Delete Channel
[Circumrotate Encoder] to choose
delete channel, press
Press[lOW]+[MONI]+Power
Copy Function with
same time.
Cable
data,then
Operation
band in circle
Mode and Frequency+Channe
Encoder] to
PIT to save.
Mode.
second)+[C].
Encoder] to
press PTT to save.
second)+[D]. Rotate
PIT to exit.
ON at the
Press [MONI] to transmit
exit to power off and reboot.
PROMPTION
Page
The red indicator flashes when
transmitting
26
communicate
The transmitting will stop when
the red indicator flashes and "Du"
26
sounds
"Da da" sounds at intervals.
27
The transmitting(last
will stop when hear "Du"
from speaker.
The transmitting(last
will stop when hear a prompting
27
voice.
The transceiver transmits after a
while of the TOT
28
When receive signal from other
transceiver,the green light
Press
sounds heard,then retum to
signal.
but it can still
charged
The voltage of battery is
too low. Please charge at
once!
Out of
frequency is out of the
range of the
a little while) TOT
sounds Release
alert tone.
a little while)
TOT
Set Interval after TOT or
TOT resume
alerts.
limited
iver can
ON.
BCl function
PIT to transmit and "Du"
receive
low battery, need to be
lock, programmed
transceiver.
alert is ON.
PIT
to stop the
alert is ON.
time. After
time the transce-
transmit.
is ON.