Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GBO Technology S1080 IP
Summary of Contents for GBO Technology S1080 IP
- Page 1 GBO TECHNOLOGY S1080 IP Network Camera Quick Reference Guide...
- Page 2 Unpublished copyright @2013 GBO Technology, Inc. All rights reserved. This document is the property of and contains information proprietary to GBO Technology, Inc. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the written permission of GBO Technology, Inc.
-
Page 3: Table Of Contents
Quick Reference Guide QRG-S1080-1000 Revision B T able of Contents ....................1 ONFIGURE THE CAMERA FOR THE LENS TYPE ....................... 1 NSTALL THE AMERA FOR THE IRST Camera Connected Directly to a Personal Computer ..............1 Standalone POE Switch Installation ....................5 UPNP- and DHCP-Enabled Network Installation ................ - Page 4 Quick Reference Guide QRG-S1080-1000 Revision B Figure 21 Camera Settings Screen ........................14 Figure 22 Camera > Pan/Tilt Screen........................15 Figure 23 Audio Setting Screen ..........................16 Figure 24 Date/Time Screen ..........................17 Figure 25 Network and Port Screen ........................18 Figure 26 Alarm Screen ............................
-
Page 5: Configure The Camera For The Lens Type
CONFIGURE THE CAMERA FOR THE LENS TYPE The two most commonly used types of lenses on the GBOT S1080 IP Network Camera are the manual iris lens and the DC Iris (direct control iris) lens. The factory-set default is for the manual iris lens. -
Page 6: Figure 2 Camera Connected Directly To Pc
Quick Reference Guide QRG-S1080-1000 Revision B Step 3. Connect Camera to Your Computer Using an Ethernet cable, connect one end of the cable to the LAN/POE slot in the back of the camera and the other end to your computer (see Figure 2). Ethernet Cable LAN/POE/slot Camera... -
Page 7: Figure 4 Wrench Icon And Application Settings Screen
Quick Reference Guide QRG-S1080-1000 Revision B Video rendering fps Wrench icon Open web in external browser Apply button Figure 4 Wrench Icon and Application Settings Screen Change the Video rendering fps to 15. Click on Open web in external browser checkbox. Change Video streaming transport to from the drop-down list. -
Page 8: Figure 6 Internet Options
Quick Reference Guide QRG-S1080-1000 Revision B Click on Internet options and the Internet Options dialog box opens. Delete the text in the Home Page text box, and click on the OK button. Step 9. Open Web Page – After Changing Browser Setting Back at the OnVIF Main Screen, click on Web Page again (see Figure 3). -
Page 9: Standalone Poe Switch Installation
Quick Reference Guide QRG-S1080-1000 Revision B Step 11. Set Browser Size At the Internet Explorer screen, click on the Settings icon located in the upper right-hand corner of the screen. Select Zoom (100%) from the drop-down menu, and then select 100% from the second drop-down menu (see Figure 9). -
Page 10: Upnp- And Dhcp-Enabled Network Installation
Starting the Web Browser GUI Using UPnP By default, the GBOT S1080 IP Network Camera has the User Plug and Play (UPnP) functionality enabled (see that the Enable UPNP checkbox is checked in the Network and Port Screen (see Figure 25). -
Page 11: Use Dchp To Obtain An Ip Address Automatically
Log In via Web Browser GUI The GBOT IP Network Camera Log In screen displays when the connection to the GBOT S1080 IP Network Camera has been successful. Enter the User Name (admin) and Password (9999), and then click on the Submit button (see Figure 7). -
Page 12: Web Browser Gui Screen
Quick Reference Guide QRG-S1080-1000 Revision B WEB BROWSER GUI SCREEN Select Stream(s) to View The Live Video screen is the default Web Browser GUI Screen and displays when the software is opened. Three stream selections are available for you to view, either singly, from the drop-down list, or at the same time. The Stream Type must first be selected at the Settings ... -
Page 13: Add/Edit Users Screen
Quick Reference Guide QRG-S1080-1000 Revision B When any of the preset conditions are met, the alarm is triggered and the alarm icon changes from inactive to activate. The alarm icon changes color from white to orange to give the user a visual signal that the alarm state has changed. -
Page 14: Video Settings
Quick Reference Guide QRG-S1080-1000 Revision B VIDEO SETTINGS At the Live Video Screen (see Figure 15), click on Settings Video and the Video Screen opens. Here you make selections to determine how the live streaming video will appear. These selections are described in Table 1, below. Figure 18 Video Screen Table 1... - Page 15 Quick Reference Guide QRG-S1080-1000 Revision B Selection Action 1) Date. Click on Enable Date check box to activate the date function. 2) Time. Click on Enable Time checkbox to activate the time function. 3) Logo. Click on Enable Logo check box to activate the logo function. Select a position for the logo: top-left or top-right.
-
Page 16: Advanced Video Settings
Quick Reference Guide QRG-S1080-1000 Revision B Advanced Video Settings Click on the Advanced button on the Video Screen and the Advanced Video Screen opens. Here you can make additional selections to control the live streaming video. These are advanced settings and are described in the GBOT S1080 User’s Manual. -
Page 17: Advanced Features Screen
Quick Reference Guide QRG-S1080-1000 Revision B ADVANCED FEATURES SCREEN Live Video Screen (see Figure 15), click on Settings Advanced Features, and the Advanced Features screen opens. At this screen you can configure how you want motion and faces to be detected. You can also set privacy areas where a black box blanks out specified areas on the live video. -
Page 18: Camera
Quick Reference Guide QRG-S1080-1000 Revision B CAMERA At the Live Video Screen (see Figure 15), click on Settings Camera, and the Camera screen opens. At this screen you can set camera settings. These selections are described in Table 2, below. Refer to the Definitions section of the GBOT S1080 User’s Manual for more information on the parameters set at this screen. -
Page 19: Camera - Advanced Settings
Quick Reference Guide QRG-S1080-1000 Revision B Selection Action Enable/disable histogram on the primary video stream: ON or OFF (see an Histogram example in Figure 21). Lens Distortion Correction Enable/disable lens distortion: ON or OFF. Click on the OK button to save your selections and wait for the changes to take effect. Camera –... -
Page 20: Alignment Controls
Quick Reference Guide QRG-S1080-1000 Revision B Selection Action Focus Speed Specify the focus speed from 0 to 3. Click on the Store button to save your selections and wait for the changes to take effect. Alignment Controls Click first on the Center button, and then click on the Store button to center the camera on the desired location. Or, use the directional arrows to move the camera in the direction indicated, and then click on the Store button to save the camera position. -
Page 21: Date/Time
Quick Reference Guide QRG-S1080-1000 Revision B Selection Action Audio Output Using the slider, specify the audio playback volume from 1-100. Volume Click on the Ok button to save any changes and wait for the changes to take effect. DATE/TIME At the Live Video Screen (see Figure 15), click on Settings Date/Time, and the Date/Time screen opens. At this screen you can set the time in three ways: manually, synchronized with your computer time, or with your SNTP server. -
Page 22: 10.0 Network And Port Screen
Quick Reference Guide QRG-S1080-1000 Revision B Selection Action 1) Select this option to use the SNTP Server as the time source for the camera. 2) Enter the address of your SNTP Server into the SNTP Server field. Obtain the address from your IT personnel. Synchronize with SNTP Server 3) Click on the Automatically adjust for daylight saving time changes checkbox. -
Page 23: 11.0 Alarm
Quick Reference Guide QRG-S1080-1000 Revision B NOTE: The Network tab fields are read only for DHCP and can be edited only if Static IP Mode is selected. Enable multicasting at the RTSP tab. Enable user plug and play (UPNP) by clicking on Enable UPNP checkbox. Retain Network Settings during hard resets by clicking on its checkbox. - Page 24 Quick Reference Guide QRG-S1080-1000 Revision B Selection Action 2) Ethernet Lost. Triggers an alarm when the network connection is lost. 3) Audio Alarm. Triggers an alarm if the audio level exceeds the alarm level set in the Audio screen (see Section 8.0, Audio). 4) Tamper Detection.
-
Page 25: 12.0 Storage
Quick Reference Guide QRG-S1080-1000 Revision B NOTES: 1. The FTP, SMTP server settings have to be configured first at the Network and Port Screen (see Section 10.0, Network and Port Screen). 2. Limit the size of outgoing video clips via email. For more information, consult a qualified IT/MIS administrator or your ISP. -
Page 26: Upload Files At The Storage Screen
Quick Reference Guide QRG-S1080-1000 Revision B Click on the Day checkboxes and select the days from their drop-down lists. Click on any of the seven weekday checkboxes and select the From and To times from the drop-down lists from 00 to 23 (hours). Click on the Ok button for the changes to take effect.
Need help?
Do you have a question about the S1080 IP and is the answer not in the manual?
Questions and answers