Honda Accord Coupe 1991 Reference Owner's Manual page 58

Stereo Sound System (cont'd)
Repeat Button (REPEAT)
Push the REPEAT button (indicator on) to return to the begin-
ning of a song or section of programming and repeat its play.
Push the button again (indicator off) to cancel the repeat func-
tion and resume normal play.
Dolby® Noise Reduction
Push when playing tapes recorded in Dolby NR (the Dolby NR
Indicator will light). Push again when playing tapes not record-
ed in Dolby NR. Use of the wrong setting will affect high fre-
quency response.
NOTE:
The Dolby NR circuit will not operate during radio reception.
Dolby noise reduction system is manufactured under license
from Dolby Laboratories Licensing Corporation. "Dolby"
and the double-D
Laboratories Licensing Corporation.
Skip Button
The circuit senses silent passages between songs or programs
on a tape. Push upward to automatically advance to the begin-
ning of the next song, or downward to return to the beginning
of the song just played.
NOTE: Tapes that contain short silent passages between
songs, a high level of noise between songs, or silent passages
within a song may not be suitable for this function.
Metal Indicator (METAL)
Most metal or CrO
back edge. If such a cassette is inserted, the player will detect
the slots and automatically switch to the proper equalization
for full enjoyment of metal/CrO
go on when coded cassettes are played.
Eject (EJECT)
Push this button to stop and eject the tape.
Ignition Key-OFF Eject: The cassette being played will be
automatically ejected when the ignition or the unit is turned
off.
NOTE: When one side of the tape ends, "Auto-Reverse" will
automatically begin playing the other side, therefore, you must
push the eject button to stop or remove the tape.
symbol are trademarks of
cassettes are coded with slots on their
2
tapes. The indicator light will
2
Dolby