Meijer 1401M Owner's Manual

If you have any questions about your sprayer, please do not return it to the store!! Call the
Consumer Hotline at 1-800-253-4642 year -yound Monday through Friday 8:00 a.m. to 7:00 p.m. ;
March 1 - August 31 on Saturday and Sunday 10:00 a.m. to 4:00 p.m., Eastern Time
WARNING!!! THIS PRODUCT IS DESIGNED TO SPRAY CHEMICALS THAT MAY BE HARMFUL
AND COULD CAUSE SERIOUS PERSONAL INJURY IF INHALED OR BROUGHT INTO CONTACT
WITH THE USER. FAILURE TO READ AND FOLLOW OWNERS' MANUAL INSTRUCTIONS BEFORE
USE AND/OR MISUSE OF THIS PRODUCT COULD RESULT IN EXPLOSIVE FAILURE
• ALWAYS water test sprayer before each use.
• ALWAYS wear long sleeve shirts, long pants, goggles, gloves and durable shoes.
• ALWAYS READ AND FOLLOW label instructions for the chemicals to be applied.
• AFTER USE release pressure and clean the sprayer.
• ALWAYS RELEASE pressure in sprayer before servicing.
• DO NOT alter the sprayer or any components.
• DO NOT spray flammable, caustic (i.e. acids, chlorines and bleach), corrosive, heated or self-heating solutions
with this sprayer.
• DO NOT store liquids in the sprayer.
• NEVER fill tank above the "MAX FILL LINE" on the tank.
A. HOSE TO TANK ASSEMBLY
1. Insert the pink siphon tube approximately ½" into the pink hose insert otherwise sprayer will spray only air.
2. Lubricate the black o-ring on the pink hose insert and then push (2a) into the threaded tank nipple until fully
seated.
3. Screw hose nut onto threaded tank nipple. Firmly hand tighten.
1
B. FLOW CONTROL TO HOSE
1. Remove the flow control hose nut from the flow control and slide over the hose.
2. Push the hose over the pointed end of the flow control until it touches the threads.
3. Screw the flow control hose nut onto the flow control. Firmly hand tighten.
1
Owners' Manual
Lawn & Garden Polymer Sprayers
Models 1401M, 1402M, 1403M and 1002M
WITH MAJOR INJURIES.

ASSEMBLY INSTRUCTIONS

2
2
2a
3
3