Sanako Lab 100 User Manual

Master cassette

Hide thumbs Also See for Lab 100:

Download this manual

Release Date:19.3.2008

Document number: 0807903

Document type: Technical Document

Product name and version: SANAKO Lab 100 Master Cassette

SANAKO LAB 100 MASTER CASSETTE USER GUIDE

OVERVIEW

A durable plug-and-play cassette recorder designed especially for using C-cassette based

teaching materials with the SANAKO Lab 100 digital language lab. Unlike other cassette

decks the Lab 100 cassette recorder contains a special digital input and output interface to

the SANAKO Lab 100 system.

In addition to standard cassette recorder functions the unit allows for adjustment of the

program playback speed. This means the teacher can adjust the program to the listening

level of the class.

With its built in Program Source Interface (Lab 100 PSI), the SANAKO Lab 100 Master

Cassette can be used to connect a second audio program source (e.g. CD player) to the

Lab 100 system.

This document explains how you can connect the SANAKO Lab 100 Master Cassette to

the SANAKO Lab 100 language learning systems in order to play audio material from

cassettes to students.

Dubai – Leeds – Lyon – New York – Shanghai – Turku

P.O.Box 41, Kaurakatu 46, FI-20741 Turku, Finland,

SANAKO User Club and Discussion Forum

Page: 1 / 5

SANAKO Corporation

http:// www.sanako.com

http://members.sanako.com

Page 1 A durable plug-and-play cassette recorder designed especially for using C-cassette based teaching materials with the SANAKO Lab 100 digital language lab. Unlike other cassette decks the Lab 100 cassette recorder contains a special digital input and output interface to the SANAKO Lab 100 system.
Page 2 Line Out R L Line level stereo output for external amplifier Lab 100 Source (R) Line level mono input for Lab 100 system. External sources connected to this input can be used with Lab 100 when configured as PSI source right channel in Lab 100 Config.
Page 3 The ‘Lab 100 Source (R)’ connector can be setup as Dual Channel PSI (R) with the Cassette Recorder port to connect an external source. Lab 100 Config set up with Lab 100 Master Cassette and with Lab 100 Source (R) configured for an external source.
Page 4 Two Lab 100 Master Cassettes using one SCU port Alternative solution to connect two Lab 100 Master Cassettes: Secondary Lab 100 Master Cassette can also be connected to free SCU port if available. This way only a standard Ethernet cable is needed instead of stereo to mono Y-cable.
Page 5 Product name and version: SANAKO Lab 100 Master Cassette For use as stand alone cassette player Connect a +12 V (DC) power source to the voltage input of the Lab 100 Master Cassette. Connect the external amplifier with line level input to the ‘Line Out’ connectors. All other functions except recording are available.