Do you have a question about the MICRO AMP and is the answer not in the manual?
Questions and answers
Summary of Contents for Red Sound MICRO AMP
Page 1
INPUT POWER micro AMP Red Sound the colour of music 12dB 12dB HIGH 12dB 12dB LEVEL POWER Issue 2...
Page 2
AVOID USING THIS PRODUCT AT HIGH VOLUME LEVEL SETTINGS FOR EXTENDED PERIODS OF TIME! The amplifier section of the MICRO AMP is capable of delivering very high volume levels to the connected headphones which, if sustained over long periods, could cause damage to your hearing. Also, the...
ON/OFF - Switch 12dB 12dB Use this switch to turn the MICRO AMP’s power on and off (always ensure the power is switched off when the MICRO AMP is not in use to preserve battery life). HEADPHONE OUT - Connector Connect the plug from your headphones to this 6.3mm gold-plated output socket.
(this ensures a good earth contact between the two case halves which eliminates any hum or noise pick-up) Re-fit three control knobs by pushing firmly into place on potentiometer shafts. The MICRO AMP is now ready for use. Diagram 1 Diagram 2...
Page 5
MICRO AMP TO YOUR SYSTEM micro AMP LEVEL Red Sound the colour of music When you have chosen the best mounting option for your setup, connect the MICRO AMP into your system as 12dB 12dB follows: HIGH 19” RACK Hole pitch range = 1.
LEVEL control on the MICRO AMP until a comfortable listening level is reached. The High and Low EQ controls on the MICRO AMP can be used to tailor the monitored audio sound to your individual requirements.
Page 7
This product complies with the requirements of European Directive 89/336/EEC * Specification and /or appearance subject to change without prior notice due to product improvement. Copyright / Software Copyright / Design Right RED Sound Systems Ltd. 2001 Printed in England...
Need help?
Do you have a question about the MICRO AMP and is the answer not in the manual?
Questions and answers