1. Manuals
  2. Brands
  3. Netvision Manuals
  4. Computer Hardware
  5. Hybrid NDVR System
  6. User manual

Netvision Hybrid NDVR System User Manual

Hybrid ndvr system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Hybrid NDVR Server Manual
Hybrid NDVR system
USER' S GUIDE
China Chongqing Netvision Technology Co., Ltd
TEL: (86)23—68697255 FAX :(86)23—68639816
www.jstdvr.com
www.Netvisiondvr.com
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hybrid NDVR System and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Netvision Hybrid NDVR System

Summary of Contents for Netvision Hybrid NDVR System

  • Page 1 Hybrid NDVR Server Manual Hybrid NDVR system USER‘ S GUIDE China Chongqing Netvision Technology Co., Ltd TEL: (86)23—68697255 FAX :(86)23—68639816 www.jstdvr.com www.Netvisiondvr.com...

  • Page 2: Table Of Contents

    Hybrid NDVR Server Manual Contents Chapter1 Start up and Main Interface ......13 1.1 Preparation & Uninstallation ............. 13 1.1.1 Preparation ..................13 1.1.2 Uninstallation ..................14 1.2 Disk Management ..............15 1.2.1 Create Package ................16 1.2.2 Manage Package ................18 1.3 Start up ..................18 1.4 Main Interface ................
  • Page 3 Hybrid NDVR Server Manual 2.1 System Setup ................55 2.1.1 System Setup ..................56 2.1.2 Network Setup ..................57 2.1.3 Boot Setup ..................60 2.2 Camera Setup ................60 2.2.1 Camera Setup ...................60 2.2.2 Group Setup ..................64 2.3 Sensor Setup ................67 2.3.1 Sensor Setup ..................67 2.3.2 Group Setup ..................67 2.4 PTZ &...
  • Page 4 Hybrid NDVR Server Manual 2.6.4 Display Setup ...................79 2.7 Password Setup ................80 2.7.1 User Information ................80 2.7.2 User Right Setup ................82 Chapter3 IP Camera Setup ........... 84 3.1 Functional Buttons ..............85 3.2 Server Setup ................86 3.3 Channel Setup ................87 3.4 PTZ Control ................
  • Page 5 Hybrid NDVR Server Manual 4.5.1 Create File Clip ................102 4.5.2 Backup by Time ................103 4.5.3 View Backup File ................106 4.5.4 Burn Video File to DVD/CD ............107 4.6 Search Captured Pictures ............108 4.7 POS Playback ................109 4.8 ACU Playback .................
  • Page 6 Hybrid NDVR Server Manual 5.4.1 Fast Download Record Data ............116 Chapter6 Mobile Client ..........118 6.1 Recommended Mobile Phone Requirements ......118 6.2 Download Software ..............119 6.3 Install and Connect ..............119 6.3.1 Installation ..................119 6.3.2 Connection ..................120 6.4 Login Interface ................
  • Page 7 Hybrid NDVR Server Manual...
  • Page 8 Introductions Thank you for purchasing Netvision Hybrid NDVR System. This operation manual is to introduce how to set Hybrid NDVR system and explain each function for you to use the system effectively and stably. Users should read this manual thoroughly before you install/utilize the Hybrid NDVR system.
  • Page 9 Hybrid NDVR Server Manual System Features -Support Backup manually or by schedule. Manual backup data can be played by TV, DVD or windows media player directly without plugins. Please refer to Backup Manual for details. -Support Android phones. -Support 3G functions for DG series IP cameras. -Support plug and play disks.
  • Page 10 Hybrid NDVR Server Manual -Support the following eight kinds of resolution: 1024*768 pixels, 1280*768 pixels, 1280*1024 pixels, 1366*768 pixels, 1440*900 pixels, 1600*900 pixels, 1680*1050 pixels and 1920*1080 pixels.

  • Page 11: Important Information

    Hybrid NDVR Server Manual Important Information: For optimal performance of your system, it is important to follow these recommendations. We recommend that you divide your hard disk into two partitions (E.g. C and D) at least. The first partition is used to install Windows OS and system software, the other for storing record files.

  • Page 12: Recommended System Requirements

    Hybrid NDVR Server Manual Recommended System Requirements Chipset: Intel 875PE, 915P, 945P, 965P, Intel 3, Intel 4, Intel 5 series. Motherboard: Intel: D915/945PCY, D865PERL, G31, P31, P35, P43, P45, P55. Asus: P4P800SE, P5P800 MSI: 865PE Neo2-F, 915/925/945; Gigabit: GA-865GME, GA-945PL-G etc Video Card: ATI Rodeon 9250 128MB, ATI Radeon 9550 128MB, ATI X500, X550, X700 etc;...

  • Page 13: Chapter1 Start Up And Main Interface

    Chapter1 Start up and Main Interface 1.1 Preparation & Uninstallation 1.1.1 Preparation Before you run Hybrid NDVR system, please be sure following issues: All connectors are firmly connected; Install the driver of compression cards correctly. For detailed information, please refer to Driver Installation Manual;...

  • Page 14: Uninstallation

    Hybrid NDVR Server Manual To 64 bit OS, you have to download and install two patches: KB978637 and KB976264. You should download them from MSDNAA manually. They can‘t be installed automatically when system updates. 1.1.2 Uninstallation When you want to change this version to another one, you should uninstall it.

  • Page 15: Disk Management

    Hybrid NDVR Server Manual 1.2 Disk Management After installed Hybrid NDVR Server, you should assign space for recording, otherwise, software can‘t record. Actually, system will run disk management automatically after you installed Hybrid NDVR Server. Also, you can run disk management to assign space when you want.

  • Page 16: Create Package

    Hybrid NDVR Server Manual Main interface of disk manager 【Disk Drives】:Display the disk and its format. 【Total Size(M)】:Display the total size of the disk. 【Free Space(M)】:Display the total free space of the disk, which is the maximum space can be assigned for recording. 【Allotted Data Package】...
  • Page 17 Hybrid NDVR Server Manual Select the number of new data package User can select the number of data package for each disk in the drop-down list. Then user can press button to create data package and index for recording. After that, software could calculate the rest space automatically.

  • Page 18: Manage Package

    Hybrid NDVR Server Manual some problem while recording. 1.2.2 Manage Package After the data package is created, user can click delete the data package manually. After that, the space of the disk will be released; user can assign them for recording again. You can delete all the record files by ―Clear All Record‖.

  • Page 19: Main Interface

    Hybrid NDVR Server Manual Main interface of Hybrid NDVR Server Note: 1. When user runs the Hybrid NDVR Server without a valid license for compression cards or IP products, system will pop up a dialog box to inform you. System will work under trial version; if you want to use full version, please contact your supplier or us directly to get it.

  • Page 20: Screen Menu

    Hybrid NDVR Server Manual When the mouse moves closely or stops above a button, a text tip will be shown to interpret its function immediately; Zoom in/out video image: Left-Double-Click a camera window to zoom in/out video image (Or press F11 on the keyboard); System will detect cards and read the total channel number automatically, and the corresponding serial number of active will be displayed on information display panel.

  • Page 21: Instant Playback

    Hybrid NDVR Server Manual User can Single-Right-Click image area to pop up the screen menu, then select ―Full Screen Display‖ to view image area in full screen (or press F12 on keyboard). When you want to restore, you should Single-Right-Click image area and select ―Restore Display‖.

  • Page 22: Fast Playback

    Hybrid NDVR Server Manual according to your selection. The window that is playing back video data will be indicated with a yellow border to be different from the live windows. In the course of instant playback(for both of the compression card camera and the IP camera), you can press Space key to switch the play/pause status and direction key →...
  • Page 23 Hybrid NDVR Server Manual Next Frame Play Speed Control: Drag the slider bar to the left to slow down or to the right to speed up. Grab Picture: The captured pictures will be saved in the same path as you set in system setup. Save Record Data: Press this button to begin to save record data and press it again to end.
  • Page 24 Hybrid NDVR Server Manual 6. Disk Record Status Click this item to view the disk record status of your PC. Also, you can view the disk record status of your Hybrid NDVR remotely via CMS. Please refer to CMS client user manual for details. 7.
  • Page 25 Hybrid NDVR Server Manual Note: Here are 4 columns, Camera Name / Instant Value / Average Value / Record Loss. They will show the Instant data value / Average data value / accounts of the lost data package for corresponding cameras. Record loss will cause the video &...
  • Page 26 Hybrid NDVR Server Manual OSD includes time and channel name. In this screen you can press time or channel name and drag them to where you want directly, after that you can press button to save and press button to resume time and channel name to default position.

  • Page 27: Ip Camera Setup

    Hybrid NDVR Server Manual camera. If you want to adjust the OSD, you can set it in IP Camera Setup remotely. And when you enable the decode function in the add IP device interface, Send to TV Monitor is also available to IP devices. 10.
  • Page 28 Hybrid NDVR Server Manual The Intelligent Video Analysis Setup includes:  Face Detection  Intrusion Detection  Movement Direction Detection  Unattended Object Detection  Missing Object Detection  Tripwire Detection  Object Counting  Smoke and Fire Detection  Motion detection Each Intelligent Video Analysis record video can be searched in Video Analysis Playback, please refer to Intelligent_Video_Analysis_manual for details.

  • Page 29: Interface Description

    Hybrid NDVR Server Manual System will display the serial number of unregistered NV series IPC, DG series EMDVR and DH series IPC. And display the server name only when they are registered. To other series, system will display their USB dog serial number when they are registered.

  • Page 30: Image Capture

    Hybrid NDVR Server Manual 2. Video Sequence Press button to switch among all cameras in current windows in sequence when current partition number is less than total channels .You can press again to cancel the switch. But at first, you must confirm that Camera Sequencing Interval in system setup has been set enable.

  • Page 31: Local Setup

    Hybrid NDVR Server Manual This panel shows current date, current time, CPU occupancy rate, HDD occupancy rate and description of the selected camera. Note: HDD occupancy rate will be changed to record days when the record data package is full and the new data is overlaying the old. It‘s shown as below. 7.

  • Page 32: System Lock

    Default User ID is ―admin‖, no password. Note: If the Hybrid NDVR system is not configured as User Manage Mode, the lock button will be unusable and allow any client‘s access (even in client program, user name and password will be useless).

  • Page 33: System Menu

    15. Exit Program Press button to exit program. After clicking this button, the dialog as below will be displayed. Click ―OK‖ to quit Hybrid NDVR system. 1.4.4 System Menu 1. Backup System Parameters Select this function to export system configurations.
  • Page 34 Hybrid NDVR Server Manual Select this function to import system configurations. 3. Restore Default Parameters Select this function to restore system configurations. 4. Save Cameras Color Parameters Save the color settings for the cameras, and users can set a plan to call this setting at a customize time.
  • Page 35 User can close this keyboard manually. 11. Hybrid NDVR Board Work Mode Setup Each Hybrid NDVR system supports maximum 8 PCs 400XHC (total channel is equal to 64) series board, so user can set its work mode via this GUI.
  • Page 36 In this situation, you have to press Ctrl+Alt+Del to end Hybrid NDVR program in task manager. If F12 is enabled, you can just press F12 to back to main GUI. Hybrid NDVR system will be locked when ―Local Password‖ is enabled and the ―Auto Lock Time‖ set in Password Setup is up.
  • Page 37 Hybrid NDVR Server Manual Press this bar or to go into Add / Del IP camera interface, and then users can scan & add different series of IP devices, or just input IP / ID / PASS manually to add IP devices. For resource limitation, you can add max 64 IP cameras, including DVS and EM Hybrid NDVR.
  • Page 38 Hybrid NDVR Server Manual DX Series IPC, NV Series IPC, ONVIF Protocol IPC, configure them, and add them into Hybrid NDVR Server software directly. MD series decode card work mode: Select D1 work mode or CIF work mode to decode IP cameras when there are MD cards. Only NV series normal IP devices and NV 40 series cards can be decoded.
  • Page 39 Hybrid NDVR Server Manual You can add the mega pixel IP camera in the system. If you want to use the Record sub stream function in the IP device, you should select the data stream type Double Stream. 【Server Name】Set a name for the new IP camera device,the server name you set would show at the preview channel.
  • Page 40 Hybrid NDVR Server Manual 【If use DNS to get IP】Select whether use DNS to get IP or not, if the server end is the dynamic IP address, users need use DNS to get the server‘s 【DNS Server IP】Set IP address of DNS server host. 【DNS Server Port】...
  • Page 41 Hybrid NDVR system. When you finished adding IP Camera to Hybrid NDVR system, it will show the status of that camera, including Sever name, IP Address, connect port, sequence number for IP Camera, connect status and register information.
  • Page 42 IP camera device. (4). Decode card work mode Hybrid NDVR system supports playing video of IP Camera to TV wall directly, and then it uses the hardware decoding function of decoder, so you should set the work mode of decoder. If you don‘t use hardware decoding, you can‘t output video of IP Camera real-time, user can only play back recording...
  • Page 43 Hybrid NDVR Server Manual You can search as many as four channels together in several days. After one window is selected via clicking the black window on the right, you can double click the camera in the frame to display its video and text. You can display any camera in any window.

  • Page 44: Motion Detection Area & Cover Setup

    Hybrid NDVR Server Manual POS Filter Check the box in front of the rectangle to enable POS filter. You can type any word according to the POS text to display the lines you want. For example, if you want to display all the lines less than 5$, then you can type ―<5$‖ as the filter.
  • Page 45 Hybrid NDVR Server Manual First, you should select the PTZ camera and set the preset. Then, you should select the detected camera, which is showed as . Next, select the detected area named Zone01 like the green frame. If you select the number is 64, the total of the zone is 64, you can detect the number of areas is...
  • Page 46 Hybrid NDVR Server Manual 64. When the detected area motions, the PTZ camera will link to the preset you set. (3). Motion Setup If you don‘t want to use the motion link PTZ preset function, you should press again, then the motion detection is enable as below: By default, the entire screen is set as motion detection area where is indicated with green border around the image.

  • Page 47: Network Panel

    II. Delete Mask Press button to delete all cover areas. For IP cameras If it is an IP camera, please refer to IP Camera Setup 1.4.6 Network Panel This panel displays the network configuration of Hybrid NDVR system.

  • Page 48: Ptz Control Panel

    Hybrid NDVR Server Manual 1.4.7 PTZ Control Panel In Hybrid NDVR system, there are three ways to operate PTZ: a. Panel operate; b. Operate in video area directly; c. Keyboard operates. 1. PTZ Speed Press and drag the slider bar to adjust the speed of PTZ.
  • Page 49 Hybrid NDVR Server Manual 6. Iris + / Iris – Overrides the PTZ cameras auto-iris and brighten or darken the image. 7. Speed Dome For local board cards, press button to operate the speed dome, including Preset Setup, Preset Call and Preset Tour as below: For IP camera, the preset should be set remotely in IP Camera Setup.
  • Page 50 Hybrid NDVR Server Manual I. Add/Delete Preset In this section you can set the preset name with its sequence number, then you can press button to add/delete a preset, when you want to modify the preset you can press button to confirm your modification. For different cameras, there are different commands to open and set, so you can choose the call mode in the drop-list for different cameras.

  • Page 51: Color And Audio Adjustment

    Hybrid NDVR Server Manual when you call preset 95, you can see: When you enter the menu, you can control it by , using up, down, left and right buttons. Press IRIS- to enter the sub menu. When you use up or down to move to ―exit‖, press IRIS- to exit the menu.

  • Page 52: Matrix & Display

    Hybrid NDVR Server Manual ① Press the first button and drag it to adjust the brightness of the image that you selected, and you can resume its default value by pressing ②Press the second button and drag it to adjust the contrast of the image that you selected and you can resume its default value by pressing ③Press the third button and drag it to adjust the hue of the image that you selected, and you can resume its default value by pressing...
  • Page 53 Hybrid NDVR Server Manual 1. DI Control Press number button to check sensor all time forcibly even though user didn‘t set check sensor in Sensor Setup. The channel of DI and DO is determined by the setup of DI/DO device you set in System Setup.
  • Page 54 Hybrid NDVR Server Manual status of DO has two types: Output channel 2 is close. Output channel 1 is open. When there is no alarm triggered out, user can press the number button to output alarm forcibly and the button will show it with green. Press it again, the output will be closed.

  • Page 55: Chapter2 Local Setup

    Hybrid NDVR Server Manual Chapter2 Local Setup The Hybrid NDVR System Configuration and Setup include 7 types of configurations: System Setup Camera Setup Sensor Setup PTZ & Linkage Setup Email & SMS Setup Matrix & Display Setup Password Setup 2.1 System Setup...

  • Page 56: System Setup

    Hybrid NDVR Server Manual 2.1.1 System Setup 【Number of Channels】Display total channels of local board card, the number of IP Camera is not included. For IP Camera, you should set it remotely in IP Camera Setup. 【Sensor Inputs(DI)】Display the number of sensors (DI). The sensor input of both analog and IP cameras included.

  • Page 57: Network Setup

    Hybrid NDVR Server Manual 【Date Format】 Select the way to display date. It decides the date display mode of Hybrid NDVR system, including the information panel on the main screen, the date panel of the playback window and OSD date in video.
  • Page 58 【Feature Phone Connection】Select whether allow Feature Phone connect to Hybrid NDVR system. If select ―disable‖, it will not permit any Feature Phone devices to connect with this Hybrid NDVR system. Select remote connection port for Feature Phone device.
  • Page 59 Hybrid NDVR Server Manual 1. If your Hybrid NDVR is dynamic IP, you should set your Hybrid NDVR system as below: 2. DNS server will get domain name and current IP of your Hybrid NDVR, CMS client Client can connect to Hybrid NDVR server through this domain name.

  • Page 60: Boot Setup

    Hybrid NDVR Server Manual 500Kb).To get better video effect, we can set 4 as the permitted max connect video number. 2.1.3 Boot Setup 【Exit to Windows】 User can exit program and back to windows desktop. 【Exit and Shutdown】User can exit program and shut down computer. 【...
  • Page 61 Hybrid NDVR Server Manual Note: Because of the width limitation, you‘d better input the characters within eight. If you input the full characters (20 characters) in the blank, you should select the characters and delete them; Because of the properties limitation, you‗d better not use ―\‖ ―:‖ ―/‖ in camera description.
  • Page 62 Hybrid NDVR Server Manual Click this button to make advanced setup for video quality, you can set I B P frame and maximum bit rate. Note: If you are not familiar with those features, we advise you not to revise them.
  • Page 63 Hybrid NDVR Server Manual to the network bandwidth. 【Image Size】Set the resolution for local record. There is an item ―704*576(12fps)‖, each channel can be set ―704*576‖, but not real time, system will select frame rate automatically around 12-15fps. To get best effect, you should set the resolution of local record according to your CPU configuration.

  • Page 64: Group Setup

    Hybrid NDVR Server Manual 【OSD Contrast】Set OSD displaying brightness & position. The ―auto‖ item in OSD Contrast‘s drop-down list will make OSD suit the background‘s color automatically. 【Copy Setup to】Set other cameras with the same setup. Note: 1) When there are no video in some windows, an alarm will appear (beep to tell you some video information is missing).
  • Page 65 Cameras include local board cards and IP modules. 【Pre-Event Record】Select the start time of record when there is an alarm. When Hybrid NDVR system is in Motion Detect mode or Sensor Detect mode, it can record video before the alarm is trigged.
  • Page 66 4. Motion or Sensor Record (yellow): Combine with above 2 and 3 function (e.g. Wednesday); 5. Normal & Motion Record (light blue): Hybrid NDVR system records in motion detection record when it detects moving object and in normal record when there is no motion (e.g. Thursday);...

  • Page 67: Sensor Setup

    Hybrid NDVR Server Manual 2.3 Sensor Setup 2.3.1 Sensor Setup 【Select Sensor】 Select the sensor from the drop-down list in order to set the parameters of it. 【Sensor】Select this sensor port to use or not. 【Sensor Position】Enter the description for easy identification. 【Activate PTZ Preset】Select linkage of Speed Dome preset number.
  • Page 68 Schedule Setup (Example for below figure) 1. Check Alarm (Red): Hybrid NDVR System responds with sensor during this time. (00:30 to 12:00 from Sun. to Sat.); 2. Not Check (gray): Hybrid NDVR System responds with no sensor alarm during this time. Note:...

  • Page 69: Ptz & Linkage Setup

    Hybrid NDVR Server Manual 2.4 PTZ & Linkage Setup 2.4.1 PTZ Protocol Setup 【Selected Camera】Select the camera from the drop-down list to set the parameters. The cameras just include the cameras of local board cards; IP Cameras are not included. For IP Camera, you should set it remotely in IP Camera setup.

  • Page 70: Motion Detection Relay

    Hybrid NDVR Server Manual installation mode. Note: 1) PTZ position will influence PTZ control. E.g.: if you set it as obverse and press left, then it will turn left. If you set it as inverse and press left, then it will turn right; If there is (H) after the PTZ protocol, it has the high speed of Preset function.
  • Page 71 【Video Loss Send SMS】Set sending SMS disable or enable when video loss. Schedule Setup 1. Motion & Video Loss (Red): Hybrid NDVR System responds with Motion Detection and Video Loss alarm in specified time; 2. Motion Alarm (Blue): Hybrid NDVR System only responds with Motion Detection alarm in specified time;...

  • Page 72: E-Mail & Sms Setup

    Hybrid NDVR Server Manual 2.5 E-mail & SMS Setup Press button to enter E-Mail setup: Note: Before you set the E-mail setup, you should pay attention to several points as below: alarm that triggers E-mail sending includes types: Camera-related alarms (Motion detection alarm & Video loss alarm) and Sensor-related alarms.
  • Page 73 Hybrid NDVR Server Manual After you insert the GSM MODEM, Firstly, you should install the driver. When the driver is installed, the interface as below will be displayed:...

  • Page 74: Email Setup

    Hybrid NDVR Server Manual 2.5.1 Email Setup 【SMPT Server】SMTP server address, e.g.: mail.jstHybrid NDVR.com, 【SMPT Port】SMTP listen TCP‘s port for connect request. 【Auth. Type】Logon mailbox, operator should select SMTP authentic type. Or select ―simple login‖. 【Login User ID】Mailbox‘s ID. 【Login Pass】Mailbox‘s password. 【SSL Security】Security protocol for Mailbox.

  • Page 75: Sms Setup

    Hybrid NDVR Server Manual 【Email Title】Enter title of the E-Mail to be sent. 【Email Screenshot As Attachment】When there is an alarm, the system will grab a picture, operator can select whether send the picture as an attachment of the E-mail. When setup is finished, user can press to test the function.

  • Page 76: Matrix & Display Setup

    Hybrid NDVR Server Manual 2.6 Matrix & Display Setup 2.6.1 Matrix Setup 【Matrix Group】System operator can set groups of video images to be sent out through matrix decode card, each group has different display modes. Up to 16 groups you can set. 【Video Out Port】Select the output port of Matrix card that you want to set, the total number of channels is decided by Matrix Decode card.

  • Page 77: Matrix Setup For Dg42Xxhf Cards

    Hybrid NDVR Server Manual 【Video Switch Interval(sec)】Set interval that each window shows cameras circularly when there are more than one camera in it. Note: 1. One camera is only shown in one window once. But you can show one camera in 2 windows through switching the main camera channel and sub camera channel.

  • Page 78: Vga/Hdmi Output Setup For Dg4204Hd Card & Vga Output

    Hybrid NDVR Server Manual 【Matrix Group】System operator can set groups of video images to be sent out through the TV output port of DG42xxHF card, each group has different display modes. Up to 16 groups you can set. 【Video Out Port】 Select the output port of DG42xxHF card that you want to set, only one port is available for each DG42xxHF card.

  • Page 79: Display Setup

    Hybrid NDVR Server Manual Here you can select to output 1/4 split mode, then select to display camera in corresponding output window. Tour function is supported. Other related operation is similar to the Matrix settings for DG42xxHF cards. New version software supports the VGA output for DG42xxHF cards, the settings are similar to the Matrix settings.

  • Page 80: Password Setup

    Hybrid NDVR Server Manual when restart the next time. Note: If this function is disabled, the system will display SetGroup1 after reboot. So, it‘s suggested not to change the display order of SetGroup1. User should change the display order from SetGroup2. 【Video View Mode】Set the split mode, the split mode is same as main window‘s display split mode.
  • Page 81 PC Hybrid NDVR, and activate the lock button in main window. Only authorized user can log into Netvision System at User Manage Mode. 【Auto lock time】Select a time to enable system to lock automatically when there are no actions during this time.

  • Page 82: User Right Setup

    Hybrid NDVR Server Manual delete it. 2.7.2 User Right Setup 【Select setup items】Select an item from the drop-list and then choose the cameras for the users. These items include【Camera View Right】, 【Camera Playback Right】,【Camera Audio Right】,【PTZ Control Right】. 【Camera View Right】Select cameras can be viewed by the user you are setting.
  • Page 83 Hybrid NDVR Server Manual...

  • Page 84: Chapter3 Ip Camera Setup

    Hybrid NDVR Server Manual Chapter3 IP Camera Setup Note: For IP camera setup, its alarm and related setup is only available when you set remotely. The local setup of PC Hybrid NDVR is not available for IP Cameras except Recording Schedule in Camera Setup.

  • Page 85: Functional Buttons

    Hybrid NDVR Server Manual Remote Setup Interface of Axis IP Camera 3.1 Functional Buttons There are 6 buttons in each page. They are Upgrade, Restart, Time adjustment, Save and Exit. Get into the IE client of IPC. System can upgrade to the server remotely. Click this button, and select the right file.

  • Page 86: Server Setup

    Hybrid NDVR Server Manual Adjust date and time of DVS or EMDVR. The new date and time will be consistent with Hybrid NDVR server computer. After setup is finished, click this button to save the setup. Exit setup. Remote setup for DH Series IP camera or DVS includes Server, Channel, PTZ, Sensor and Alarm.

  • Page 87: Channel Setup

    Hybrid NDVR Server Manual 【If use PPPOE】 If system uses PPPOE to connect with web, 【PPPOE Login Name】 please select it and input the PPPOE login 【PPPOE Login Pass】 ID and password. 【User Pass】Set the password of DVS remotely, after that operation you should change the Login Pass to corresponding value in Add / Modify server.
  • Page 88 Hybrid NDVR Server Manual 【Main Stream】 【Sub Stream】 Select Main Stream or Sub Stream for the current cameras. 【Resolution】Set the resolution at which the video files will be recorded. Choices are DCIF, CIF, QCIF, 2CIF and 4CIF. The higher the resolution is, the more disk space needed.

  • Page 89: Ptz Control

    Hybrid NDVR Server Manual Note: This record schedule is only available to EM-DVR/DVS/ with HDD/SD card. There are 6 time segments every day. Every segment has a start time, an end time and a record type. The time segment is set in sequence; every segment can‘t be overlapped, included or skipped with any other.
  • Page 90 Hybrid NDVR Server Manual In this screen, you can define the PTZ protocol and set the Preset Position as well as the plan to execute them automatically. 【Camera NO.】Select the camera to be set from the drop- list. 【Baud rate】Set baud rate according to PTZ protocol from the drop- list. 【PTZ Protocol】Select the communication protocol for the PTZ camera from drop-list.

  • Page 91: Sensor Setup

    Hybrid NDVR Server Manual 【Preset】Set a preset and click ―Add‖ to add it to the Preset Schedule or select one preset and press ―Del‖ to delete from the Preset Schedule. 【Call Time】 【Schedule List】 Set the time when the preset will be called. Tour Group Add the Preset cameras into the Tour Group and set the Stay Time for one tour group.
  • Page 92 Hybrid NDVR Server Manual 【Sensor NO】Select one sensor to be set. 【Sensor Name】Enter the name description of the sensor. 【Type】Select alarm type (sensor type) from ―NO‖(Normally Open) or ―NC‖(Normally Closed). 【Policy】Select ―Sensor Alarm Handling‖ firstly, handling policies will be available as below: On screen warning—Display the alarm information on the monitor.

  • Page 93: Alarm Setup

    Hybrid NDVR Server Manual 【Copy to】After finishing one channel, if you want to set any other channels‘ configuration as the same as this camera, you can select a channel number from drop-list, and press button. 3.6 Alarm Setup Press button to set alarm parameters. 【Camera】Select a camera to be set from the drop-list and you can copy the configuration to the other cameras by clicking copy button.
  • Page 94 Hybrid NDVR Server Manual by pressing the All button. Of course,you can clear the selected area by pressing the Clear button. 【Policy】Selecting ―Handling current alarm‖ firstly, handling policies will be available as follows: On screen warning—Display the alarm information on the monitor. Audio warning—Indicate the alarm with voice.

  • Page 95: Chapter4 Playback

    Hybrid NDVR Server Manual Chapter4 Playback 4.1 Main Interface New function released: Users can scroll the mouse to zoom in / out the video in local playback. When selecting a played camera, scroll your mouse, software will zoom in / out part of the video use the point mouse stops as center.

  • Page 96: Steps Of Playback

    Hybrid NDVR Server Manual 4.2 Steps of Playback 4.2.1 Select Date Select one window (the 1 one in default), and then click button to show the date. The blue dates contain record data. The green date is the current date. The gray dates signify no data.

  • Page 97: Select Camera

    The number button with navy blue means this channel has record data. By pressing it directly on the numerical panel, Hybrid NDVR system will play back record data from the first file.
  • Page 98 Hybrid NDVR Server Manual ① ② There is a telephone on the desk (Picture ①); But it disappeared now (Picture ②); If you want to know where the telephone is, you can select this area on the image to do a smart search when playback the video. When you press the smart button, you should select the area percent by single clicking the right mouse, if the motion percent of the area above the select percent, it will be shown out.

  • Page 99: Select File

    Hybrid NDVR Server Manual 4.2.4 Select File After selected the camera to play user can click button to show all the files of this camera. By default, system will play back video file from the first one. In this screen you can change the file you want to play by double clicking it directly.

  • Page 100: Play File And Related Operations

    Hybrid NDVR Server Manual Press to view the record data of other cameras. The red bar means the exact time when system is playing back now. Note: It is not suggested that multi-channel (more than 10 channels) record and playback coinstantaneous unless your PC has a powerful configuration, because the data throughput of HDD is huge.

  • Page 101: Capture Picture

    Hybrid NDVR Server Manual Press button to open all playback windows in sequence according to the order of the cameras. Note: If you press this button as soon as you enter the playback interface, all the cameras will be played back from the beginning of this day when there is record data.

  • Page 102: Backup

    Hybrid NDVR Server Manual 4.5 Backup Note: If user has no right to backup, he will be forbidden to get access to ―Create video file clip‖ and ―Backup record by time‖. When he clicks the two options, the dialog as below will be shown: ，there are four items to be selected as below.

  • Page 103: Backup By Time

    Hybrid NDVR Server Manual 【 Play control button 】 User can press and drag slider on to control the player time. 【Beginning and stop position setup】After you select a time, press button to set it as the beginning time, and then drag the bar to select another time and press button to set it as the end time.
  • Page 104 Hybrid NDVR Server Manual 【Save Path】Select path for the backup file, User can backup record file to CD. 【Backup Camera】 Select the backup camera. User can select more than one camera at one time. 【Select begin time】 【Select end time】Select the beginning time and end time of the file to backup.
  • Page 105 Hybrid NDVR Server Manual If AVI (H.264) is selected before backup, then, backup data can be played by TV and DVD etc. without plugins. If MSMPG4 is selected before backup, then, backup data can be played by windows media player without plugins. Note: When AVI (H.264) or MSMPG4 is selected, the data can be united.

  • Page 106: View Backup File

    Hybrid NDVR Server Manual volume; 4. Write data to buffer; 5. Write CD; 6. Delete buffer and temporary file. 4.5.3 View Backup File 【Select channel】Select channel; 【Save Path】Select path of the backup file; Select one file from File List and Double-Click it, this file will be played.

  • Page 107: Burn Video File To Dvd/Cd

    Hybrid NDVR Server Manual Capture a picture; Burn CD. Copy the file player to the save path. 4.5.4 Burn Video File to DVD/CD ① ③ ② Area ①:File directory. Area ②:File list. Area ③:The File directory and list of CD that is to be burned to. ②...

  • Page 108: Search Captured Pictures

    Hybrid NDVR Server Manual Open the CD—ROM Close the CD—ROM It supports DVD or CD disc backup directly, max supports 4.3G DVD disc. User can erase DVD-RW disc and write again. The whole work needn't install a third burning software. 4.6 Search Captured Pictures Click to enter the window of search captured pictures:...

  • Page 109: Pos Playback

    Hybrid NDVR Server Manual Note: If you want to save the reworked picture in another file, you can change its name and path here, with BMP or JPG as suffix. Then click the button 【Related operations】 Save the reworked picture. Functional buttons of picture.
  • Page 110 Hybrid NDVR Server Manual Show Txt: show the txt on the screen (If you select txt overlay in the Cam setup, the show txt is invalid.) Data: Select the search data. Camera: Select the search camera. From...To: Select the begin time and the end time. Press this button to search the record for the setting setup.

  • Page 111: Icon Playback

    Hybrid NDVR Server Manual 4.9 ICON Playback Press the button , you will see the interface as below: Select the camera. Set the begin time and the end time of the record. Set the time of one view plays. E.g.: As the above image, the time from 9:45 to 12:00, it includes 135 minutes between the begin time and the end time.

  • Page 112: Chapter5 Ie Client

    Hybrid NDVR Server Manual Chapter5 IE Client Client user can view video of Hybrid NDVR Server through Internet Explorer. The default web server port is 80. If user changes it to other port, user should add this port number after IP or domain name when visiting the video of Server through Internet Explorer.

  • Page 113: Connection Operations

    Hybrid NDVR Server Manual 5.2.1 Connection Operations will connect the Hybrid NDVR Server‘s camera video from Press and press will disconnect all connections. If Hybrid NDVR Server‘s channel is more than channels that you selected partition button to display Hybrid NDVR Server‘s video in mode, you can use sequence.

  • Page 114: Partition Mode

    Hybrid NDVR Server Manual buttons or change status of all connections at the same time by pressing button. 5.2.3 Partition Mode You can set the partition mode by pressing a corresponding button on the right of main interface. There are 6 partition modes as below: ——1 partition mode;...

  • Page 115: Display Setup And Data Information

    Hybrid NDVR Server Manual 5.3.1 Display Setup and Data Information In this area, you can select display partition mode, date, video channel and video file named according to time. 5.3.2 Playing Operation Area In this area, you can operate video playing: 【...

  • Page 116: Remote Search

    Hybrid NDVR Server Manual 【Playing speed control】 Slowly play Fleetly play. 5.4 Remote Search Most functions and operations of Remote search are the same as Playback. The different feature is that remote search added download feature. When you playback remotely, clicking button, system will save video of current channel you selected.
  • Page 117 Hybrid NDVR Server Manual Note: When user use IE client to visit Hybrid NDVR server, If connect successfully, there will be four partitions blue window. If connect unsuccessfully, the reasons possibly are: 1) The Web server port has been used by other programs; 2) Your computer didn‘t download the player plug normally.

  • Page 118: Chapter6 Mobile Client

    Select ―Enable‖ to allow the PDA to connect With Hybrid NDVR server in Network Setup of the Hybrid NDVR system. Note: GPRS is charged by data flow, so shut down the Mobile_Hybrid NDVR application if you do not need view cameras.

  • Page 119: Download Software

    Hybrid NDVR Server Manual 6.2 Download Software You have the following methods to download our mobile client software from Hybrid NDVR: 1. Download through wireless technology (in Wireless LAN) such as Blue tooth, infrared etc. 2. Copy mobile client software to phone directly through data cable. 3.

  • Page 120: Connection

    Hybrid NDVR Server Manual WAN or LAN) or use the application supplied by the manufacture of your smart phone to download mobile client. 6.3.2 Connection After you installed mobile client in your smart phone, you should be sure that your smart phone connect with Internet correctly. Currently, mobile providers support WAP and WEB access point, mobile client must use Internet as access point (AP) to access Hybrid NDVR Server remotely.

  • Page 121: Ptz Control

    Hybrid NDVR Server Manual → 6.6 PTZ Control Press the ―Options‖ button and select the ―PTZ‖ button to enter the PTZ control interface. 【Orientation control】: Select the button and press “OK”,it will change into . After that, by pressing and holding the up, down, right and left buttons, the PTZ camera will move up, down, right and left.

  • Page 122: Appendix A: Fast Key Reference

    Hybrid NDVR Server Manual Appendix A: Fast Key Reference Please refer to Keyboard Shortcuts Setup. This color key denotes PTZ control. This color key is other function control. PTZ control: Function Up(in the status of preview for PTZ control) ↑ Play in fast speed (in the status of instant playback and review playback) Down(in the status of preview for PTZ control)
  • Page 123 Hybrid NDVR Server Manual Insert Focus- Delete Focus+ C、—、 Num0-9G、 Presets Control Operation Call preset Enter C、—、 Num0-9 Presets Control Operation Other controls: Function System Help Switch the camera channel Next screen Page Down Previous screen Page UP All cameras recording 30 Sec emergency Zoom in/out the single camera view Switch between full screen mode and main GUI (Equivalent to pressing space key except Instant Playback mode)

  • Page 124: Appendix B: Audio Preview

    Hybrid NDVR Server Manual Appendix B: Audio Preview NV Series Card Audio Preview To 40 series card, please connect the card use the cable in the box as follows: Note: Sometimes there is no preview sound, Solution: double click the volume control in the taskbar, open the properties dialog box, and check AUX control.

  • Page 125: Dg Series Card Audio Preview

    Hybrid NDVR Server Manual To NV 42 series card, there is no need to connect the ―audio in‖ and ―audio out‖ cable. However, a sound pick-up is necessary if you want to hear and record the sound, no matter what‘s the type of the card. DG Series Card Audio Preview The connection is same as NV 40 series card.

  • Page 126: Appendix C: How To Use "Copy File" Folder

    Hybrid NDVR Server Manual Appendix C: How to Use “Copy File” Folder In installation CD, there is a file named ―Copy File‖. If you want to replace some files in installation directory, you can copy new files into ―CopyFile‖, when you finished the installation, the new files will replace the old files automatically.

  • Page 127: Appendix D: Hybrid Ndvr Board Explanation

    Hybrid NDVR Server Manual Appendix D: Hybrid NDVR Board Explanation This Hybrid NDVR System manual is suitable for all NV and DG series Hybrid NDVR boards, including: NV400XHC, NV400XHF, NV400XHS, NV4016HCS, NV4216HCI and NV42XXHFV; DG40XXHC, DG40XXHC–E, DG4108HC (N) and DG4108HF, etc.

  • Page 128: Appendix E: How To Use 3G Function

    Hybrid NDVR Server Manual Appendix E: How to Use 3G Function For a DG camera supports 3G function, you can enable its 3G function in our Hybrid NDVR software by checking the box in front of Enable 3G. The steps to configure 3G function are as below: First of all, forward 3G server port to your router if you want to use 3G function in WAN.
  • Page 129 Hybrid NDVR Server Manual The third is to enter 3G Setting to config 3G function. Insert a card in the camera first. Then, you should select a 3G type according to your phone from WCDMA, TD-SCDMA and CDMA2000. Check the box after Advanced to set APN according to your phone. The 3G Status will turn to be ―pppoe dial-up success!‖...
  • Page 130 Hybrid NDVR Server Manual Note: You can‘t modify the camera once it is connected to the Hybrid NDVR. If you want to change the stream type, you should delete first and then re-add it. You have to modify its stream type before it is added to the software.

This manual is also suitable for:

Nv400xhcNv400xhfNv400xhsNv4016hcsNv4216hciNv42xxhfv ... Show all

Table of Contents