Installation & Connection - Samsung SNB-7004 User Manual

installation & connection
components
b
Item
Lens
a
Power Port
b
Test Monitor Out
c
Reset Button
d
22_ installation & connection
a
c d e
Lens for the camera.
Port for power terminal block.
Output port for test monitoring the video output. Use the test monitor cable
to connect to a mobile display and check the test video.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
f g h
Description