Summary of Contents for ictor Luxury start VT-368
- Page 1 www.cn-victor.cn BASIC FUNCTION GPS +GSM Luxury start Luxury start CAR ALARM GPS/ GSM GPS/ GSM CAR AL ARM CAR AL ARM f unction use r m a nua l OPTIONAL PUSH START...
- Page 2 Characteristics of the product 1. GPS location--- you can easily track the location of your car anytime, Luxury start Feedback with ext message or multimedia message. No need extra map platform for this services, no need to extra cost for the platform, only if your mobile with GPRS, You can easily check the location with multimedia message, the feedback with location of your car and the map, very conv- enient and economical, this system with backup battery, if system was cut...
-
Page 3: Remote Buttons
INDEX Installation Dear Customer : In oder to make sure you can use the system properly, please read this Installation..............P2-7 user manual first, thanks for choose this system. 1. Specifications 1、Specifications: 2. Attention ITEM DESCRIPTIONS 3. Installation GPS antenna High sensitive GPS Receiver -169 dbm 4. - Page 4 system not connected successfully, and command no setting failed, ple- G. After the system connected with power first time, the telephone number ase disarm the system and disconnect with external power and backup of the first phone call to the main unit is the master telephone no, just dir- battery, then check the GSM antenna connection and make it connect well, ectly input the 2 command code to operate the system, other telephone and check the SIM card be place well, and after checking please re-conn-...
- Page 5 4. VT-368 Main unit and spare parts Central door lock installation 1、If the car has electronic central door locking system, only to identify the active triger or negative triger, please refer the (chart 2 and 3 for the central door locking wire diagram) One Button Starter (Optional) 2、If the car has electronic central door locking system but the driver's...
- Page 6 6. GPS Command code 7. Transmitter programming ： Command Function setting Command Function operation code When disarm, open the door, turn ACC to ON . Setting new command no Download the **new telphone Siren sound Siren sound (Must use the command Function model Setting/ way to change no**...
- Page 7 、 Anti-Hijacking position, press for 2 seconds, siren chirp once and direction light flash This function is designed for the emergency during driving, Press once. Press for 2 seconds again to defective this function,siren chirp button for 2 seconds, Direction light flashing rapidly, then press button twice and direction light flash twice for 1 time within 10 seconds, the direction light will stop flashing, after 15...
- Page 8 A) one-time start 8.18、Learning remote control(2pcs can be learn at one time),the steps 、 as follow: 1 Under arm status,press for 2 seconds on remote, siren chirp once 1. Under disarm status, open car door and step on foot brake, turn ACC and direction lights flash 3 times, the engine will be start immediately.
- Page 9 PKE Function description 5 times, this function will be turn off automatically. 6、For re-active this function, please follow step 2. With the Automation and the intelligence, and the most advanced RFID function, can by detecting the transmitter of the owner, to activation related Attention: functions.
-
Page 10: Guarantee Card
exit the anti-hijacking mode. Guarantee Card Within auto anti-hijacking and manual anti-hijacking mode, using transm- itter to stop and exit the anti-hijacking at once. Specially attention: manual anti-hijacking will make alarm and lock the engine rapidly(Refer the manual CUSTOMER`S NAME: anti-hijacking function), so please make sure the safety of your own, and operate it within the transmitter signal range, or go the safe place with the MODEL NO:...
Need help?
Do you have a question about the Luxury start VT-368 and is the answer not in the manual?
Questions and answers