Opening And Keyboard Disassembling Instructions - Generalmusic RP220 Service Manual

1) TO REMOVE THE COVER UNSCREW THE 4 SCREWS ON THE REAR, PULL THE COVER TOWARDS YOU AND LIFT IT UP.
REMOVE THE KEY RETURN SPRING.
UNLOCK THE KEY APPLING NOT MUCH STRENGTH.
NOTE: TO REMOVE A SHARP KEY BEFORE YOU MUST REMOVE THE NEAR NATURAL KEYS.
TP10
2
2) TO REMOVE THE KEYBOARD COVER UNSCREW THE FOUR SCREWS ON THE BARS (TWO FOR EACH SIDE),
AND PULL OUT THE KEYBOARD COVER.
3) TO REMOVE THE CONTROL PANEL UNSCREW THE SCREWS AT EACH END AND THE SCREWS THAT ANCHOR
THE CONTROL PANEL SUPPORTS TO THE CHASSIS.
4) TO REMOVE THE KEYBOARD UNSCREW THE 8 SCREWS UNDER THE KEYBOARD.
DRW G.Boccato DWG# 500935 PCB#
RP220
CKD I.Battelli DISK: PRT: 1/1
Opening Instructions
APP. M.Galanti REV: 01/02/01
& Keyboard disassembling
GENERALMUSIC S.p.A. ITALY
ALL RIGHTS ARE RESERVED, NO COPIES
OR REPRODUCE THIS DOCUMENT WITHOUT
WRITTEN CONSENT BY GENERALMUSIC.