Page 1
Setup Guide for Wireless For Windows 98SE/Me/2000/XP and Vista & Mac OS X 10.3.9 or later Use this to quickly setup and use your mimio wireless.
Xi, enables wireless communication USB Adapter - Plugs into any available USB port, provides a wireless link to your mimio Xi USB Cable - Extension cable for the USB Adapter, for computers with very close USB ports...
Setup Process Install the mimio software from CD if not already installed. Check our website for the latest mimio software (www.mimio.com). Depress the release button and slide the linkUSB module downward to remove the module from the mimio Xi. Insert/slide the Wireless Module...
Page 4
USB Adapter into a USB port, the included USB Exten- sion cable can be used with the USB Adapter to allow for the USB connection. Power on mimio Xi. mimio Xi can be powered by 4 AA batteries or the included AC Adapter.
Page 5
Setup Process continued Open the mimio software. Begin using a mimio stylus to use your mimio Wireless.
Link Status Indicator Green: A wireless link is established between the unit and the PC. Amber: There is no wireless link between the mimio Xi device and the PC. Refer to the Troubleshooting Section. Flashing green: Unit is is Learning Process*.
A Wireless Module can only be paired with one USB Adapter at any given point in time; you cannot program one Wireless Module to work with multiple USB Adapters and vice versa.
Troubleshooting If the Link Status LED on the Wireless Module is amber, a wireless connection cannot be made between the Wireless Module and the USB Adapter. Please try the following steps to establish a wireless connection between these two mimio Wireless components: Ensure the PC is powered and turned on.
+44 870 458 3366 (Europe) Web Site: http://www.mimio.com/support With all support inquiries, please provide us with the following information: • mimio model number (located on the mimio serial number label) • mimio software version number • Operating system on computer •...
Need help?
Do you have a question about the Wireless and is the answer not in the manual?
Questions and answers