Table of Contents
Advertisement
4.
Installation
Microsoft Windows
Download and install the Wireshark software from http://www.wireshark.org. The software installer
package also includes WinPcap, a high-speed capture driver.
Download the ubisys IEEE 802.15.4 Wireshark USB stick driver package from here:
http://www.ubisys.de/engineering/download-drivers.html.
Extract the files in the driver package into any folder on your hard disk.
Plug the device into any spare USB port on your PC. Windows will ask you for drivers. Point to the
path where the extracted driver package files are stored. Follow the instructions on the screen.
When you are done, verify that the device has been installed correctly by opening Windows Device
Manager. Your ubisys IEEE 802.15.4 device with Wireshark capture firmware should appear under the
network adapter section.
Figure 1: ubisys IEEE 802.15.4 Wireshark USB Stick in Windows Device Manager
5
www.ubisys.de
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IEEE 802.15.4 usb stick with wireshark firmware and is the answer not in the manual?
Questions and answers