Location Of User's Control - Sharp 20F550 Service Manual

LOCATION OF USER'S CONTROL

Front Panel
POWER
Press → On.
Press again → Off.
REMOTE CONTROL
SENSOR
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will be
for TV and VCR control.
In CATV/DVD position, signals sent will
be for cable TV converter and DVD
control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
VOLUME UP/DOWN
+
( ) Increases sound.
( ) Decreases sound.
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
POWER
4 seconds.
DVD
TV
VCR DISPLAY INPUT Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
1 2 3
mode.
4 5 6
INPUT
Press → Switches to external video
7 8 9
INPUT 1 mode.
FLASHBACK ENTER
Press twice → Switches to external
0 100
video INPUT 2 mode.
PERSONAL PREFERENCE
Press 3 times → Switches to external
A B C D
video INPUT 3 mode or COMPONENT
CH mode.
VOL VOL
Press 4 times → Switches back to the
— +
CH
original TV mode.
MENU MUTE
ENTER
CATV TV
Used in some instances where a Cable
Converter Box requires an "enter"
DVD VCR
command after selecting channels,
when using the REMOTE KEYPAD
REW PLAY FF
button.
CH/SKIP
PAUSE STOP REC
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
• Moves the " E " mark on the MENU
screens.
TV • CATV • VCR • DVD
MUTE
Press → Mutes sound.
Press again → Restores sound.
• When sound is muted, CLOSED
CAPTION appears if available.
4
INSIDE DOOR
VIDEO/AUDIO
IN 2
TERMINALS
CHANNEL UP/DOWN
( ) Selects next higher channel
( ) Selects next lower channel
20F550