Subscribe to Our Youtube Channel
Related Manuals for Air Live WH-9000MESH
Summary of Contents for Air Live WH-9000MESH
- Page 1 WH-9000MESH Dual-Band MESH AP/Bridge Quick Setup Guide English ● ● ● Deutsch ● ● ● Polski ● ● ● Česky ● ● ● Русский ● ● ● Português ● ● ● Españoll ● ● ● 日本語 ● ● ●...
-
Page 2: Package Contents
1. Introduction 1.1 Preface The WH-9000MESH product is ruggedized and wall-mountable IEEE 802.11 Wireless Access Point (AP) and Bridge device. The AP and Bridge mode can work simultaneously by dual radio interfaces. 1.2 Package Contents Access Point 2 attachable 5dBi omni-directional antennas... - Page 3 1.3.2 LED indicator 1.3.3 Hardware Installation To Power Injector To PC (Cat5 Cable) (Initial Configuration only) Dual-Band MESH AP/Bridge English H-9000MESH...
- Page 4 (Gateway mode). You can also enter configuration screen from WAN port, the IP address of the WH-9000MESH from the WAN port or wireless network is "192.168.254.254". Please make sure your PC is set to the same subnet as the WH-9000MESH.
-
Page 5: System Configuration
You will be asked for your username and password. Enter the default username airlive “ ”, and the default airlive password “ ” to give full access for setup configuration. (This password is case-sensitive) 3. System Configuration 3.1 WAN Configuration Click the entry on the left hand navigation panel for System Configuration –... -
Page 6: Lan Configuration
3.2 LAN Configuration Click the entry on the left hand navigation panel for System Configuration – LAN. This directs you to the System Configuration – LAN page. This set up the default numbers for the four octets for a possible private LAN function for the AP. -
Page 7: Mac Address
Channel Number The channel number is a means of assigning frequencies to a series of access points. If you are using the WH-9000MESH as both an AP and bridge, the channel number set for the AP and the one for bridge should be sufficiently different to avoid interference.
Need help?
Do you have a question about the WH-9000MESH and is the answer not in the manual?
Questions and answers