Function Setting - madcom 8848 User Manual

GSM FAX Terminal-8848 User's Manual
Phone interface: supply RJ-11 Phone Interface
Hanging voltage: 45V
Picking off voltage: 30mA / 41mA
Dialing tone Frequency: 450Hz
Antenna interface: Antenna amplifying>2.5db
Sensitivity:<-104DBM
Transmitting power<3W
Color: White /Black (optional)
AC-Adapter interface: Input: AC 110~240VAC 50~60Hz
Output: 12DC 1A.
AC-Adapter type: EU, US, AU, British can be optional
5. 5. 5. 5. Function Function Function Setting Setting

Function Setting

Setting
Before you do the following function settings, Lift handset or press hands free key of telephone set,
then you can press the buttons according to the following instructions to finish setting, you will hear
2 beeps when you finish, this testify setting successfully.
1) 1) 1) 1) Restore Restore Restore to to to to factory factory
Restore factory factory default
*#99#99# restore to factory default setting.
2) 2) 2) 2) Adjust Adjust dial interval
Adjust dial Adjust dial interval dial interval interval
*#01#30# , 01--command，30--time，Max 9.9 seconds，Min 0.5 seconds, factory default
setting is 3 seconds.
3) 3) 3) 3) Adjust Adjust Adjust Earphone Earphone
Adjust Earphone Earphone Volume
*#02#02# 02--command，02--volume，Max 4，Min 0, factory default setting is 2.
4) 4) 4) 4) Setting Setting Setting Setting local local area local local area area code area
*#04#*0755# 10--command， *0755—area code， Max 5 numbers, use "*" instead if
area code is less than 5 digits.
5) 5) 5) 5) Setting Setting Setting IP IP IP IP numbers Setting numbers numbers
numbers
*#05#17911# 05--command， 17911—IP numbers， Max 5 numbers, use "*" instead if IP
number is less than 5 digit.
6) 6) 6) 6) Set Set Set Set to to to to open open PIN open open PIN PIN PIN code code code code check
default setting
default setting default setting setting
Volume Volume
Volume
code code code
check and check check and automatic and and automatic PIN automatic automatic PIN lock PIN PIN lock function lock lock function function function
8
Version 1.1