Canon EOS 1100D Instruction Manual page 68

Shoot by Lighting or Scene Type
If you use flash, the setting will switch to [Default setting]. (However, the
shooting information will display the lighting or scene type that was set.)
If you want to set this together with [Shoot by ambience selection], set
the [Shoot by lighting or scene type] which best matches the ambience
you have set. In the case of [Sunset] for example, warm colors will
become prominent so the ambience you set might not work well.
If you don't want the Live View image to be displayed when setting
functions, press the <Q> button after step 1. Pressing the <Q> button will
display the Quick Control screen. You can then set [Shoot by lighting or
scene type] and shoot through the viewfinder.
68
3 On the Quick Control screen,
select the lighting or scene type.
Press the <Q> button (7).
Press the <V> key to select
[Default setting]. [Shoot by lighting
or scene type] will appear on the
screen's bottom.
Press the <U> key or turn the
<6> dial to select the desired
lighting or scene type. lighting or scene type. lighting or scene type.
The LCD monitor will show how the The LCD monitor will show how the The LCD monitor will show how the
image will look with the selected image will look with the selected image will look with the selected
lighting or scene type. lighting or scene type. lighting or scene type.
4
Take the picture. Take the picture. Take the picture.
To shoot while the Live View image is To shoot while the Live View image is To shoot while the Live View image is
displayed, press the shutter button. displayed, press the shutter button. displayed, press the shutter button.
To return to the viewfinder image, To return to the viewfinder image, To return to the viewfinder image,
press the < press the < press the <A> button to exit Live
View shooting. Then press the shutter View shooting. Then press the shutter View shooting. Then press the shutter
button completely to take the picture.
If you change the shooting mode or
set the power switch to <2>, the
setting will revert back to [Default
setting].