Technical Specification & Product Feature - Samsung EH***EAV* Series Installation Manual

Drain pump installation (Optional) (Continued)
Must fit tightly against body without any gap.
Drain hose
Indoor unit
Cable-tie
Float switch
Drain pump
SW05
Technical Specification & Product feature
Model EH035EAV1 EH052EAV1 EH070EAV1 DH052EAS DH070EAS DH090EAS DH105EAS DH052EAV1 DH070EAV1 DH090EAV DH105EAV DH140EAV
Capacity(Cooling
3.5/4.0kW 5.0/6.0kW
and Heating)
Power Input 0.07kW 0.12kW
Running Current 0.36A 0.51A
Refrigerant 950g 1450g
32
E-
5
Insert the flexible hose into the drain socket until it clicks.
Note
Insulation
6
Connect the cable to the electrical component box as shown at the figure.
Note
7 Adjust K4 DIP switch(SW05) to the "OFF" position.
Switch No.
Note
7.1/8.0kW 5.0/6.0kW 7.1/8.0kW
0.13kW 0.13kW 0.17kW
0.56A 1.01A 1.14A
1900g 1350g 1350g
Maximum installation height: up to 3.6m
Condensate discharge pump(built-in): Max. 750mm
Length of pipes and difference in height: see the outdoor unit installation manual
Vacuum and refrigerant charge: see the outdoor unit installation manual
 C heck if water does not drain.
 I nsulate the drain hose so that frost does not form.
Connect the drain pump cable to yellow terminal(CN74) and
the float switch to black terminal(CN51).
Switch Position Using Drain Pump
ON
K4
OFF
Wrap the drain tube outlet on the right and left side of the
indoor unit with an insulating materials.
9.0/9.5kW 10.5/11.2kW 5.0/6.0kW
0.243kW 0.15kW 0.15kW
1.22A 0.7A 1.05A
2400g 2600g 1450g
X
O
7.1/8.0kW 9.0/9.5kW 10.5/11.2kW14.0/16.0kW
0.17kW 0.13kW 0.13kW
1.10A 0.7A 0.7A
1900g 2600g 2800g
0.22kW
1.4A
2800g