Cruise Control - GMC Yukon 2015 Getting To Know Manual

c c
ruIse ontrol
Setting Cruise Control
On/Off button. The
1. Press the
the instrument cluster.
2. When traveling at the desired speed, press the SET– button to set the speed. The
symbol will illuminate in green on the instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Press to resume a set speed.
When the system is active, press once to
increase speed 1 mph; press and hold to
continue increasing speed.
SET– Set/Coast
When the system is active, press once to
decrease speed 1 mph; press and hold to
continue decreasing speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory.
Pressing the brake pedal also will cancel the cruise control.
The cruise control set speed is erased when cruise control or the vehicle ignition is
turned off.
Adaptive Cruise Control
Adaptive Cruise Control enhances traditional cruise control by maintaining a driver-
selected following gap between your vehicle and a vehicle detected directly ahead. Once a
speed is set, the vehicle will maintain the selected gap distance by braking or accelerating.
When a slower vehicle is detected ahead, the
the vehicle brakes moderately to maintain the selected following gap. If driver action is
required to apply sufficient braking, a visual alert flashes on the windshield and the Safety
Alert Seat pulses.
F
Selecting the Following Gap
Follow Distance Gap button (or
Press the
equipped) on the left side of the steering wheel to set a following gap of Far, Medium
or Near.
18
F Optional equipment
Cruise Control symbol will illuminate in white on
F
Vehicle Ahead symbol is displayed and
Collision Alert button
See Driving and Operating in your Owner Manual.
, if
F