3. Remove the Rear cover hooks (L, R).
7.19. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.18.)
2. Remove the S-Board shield case.
3. Remove the screws (×2
unit.
) and remove the S-Board
4. Disconnect the connector (S2).
5. Remove the Power button.
6. Remove the screw (×1
7.20. Remove the K-Board
1. Remove the Cabinet assy. (See section 7.18.)
2. Remove the S-Board. (See section 7.19.)
3. Remove the screws (×7
4. Remove the screws (×6
5. Remove the Glass holder side (L, R).
6. Remove the screws (×9
7. Remove the Glass holder top front.
8. Remove the Glass holder bottom front.
23
) and remove the S-Board.
).
).
).