Chapter 8. Measurements And Adjustments; Service Mode; 8-1-1.How To Enter Into Service Mode; 8-1-2.How To Exit - Haier 40D2500 Service Manual

Chapter 8. Measurements and Adjustments

8-1. Service Mode

8-1-1.How to enter into Service Mode

The way to the factory mode menu:
Step 1: Press Menu,
Step 2: Press "8893",
System will be into the factory mode menu when 2 steps above are done.
At the end of the main factory menu, you can see the edition of the software,
like this" BUILD TIME

8-1-2.How to exit

If you want to exit this factory menu, please press the button "Exit" on the remote.
system will be out the factory mode menu.

8-2. Measurements and Adjustments

8-2-1. The Main Menu

In factory mode menu,press up/down
button to choose the up/down item,press
right or OK button to the submenu.press
MENU button to go back.
31
2014-01-21 23:17:21
VERSION
Service Manual
Model No.:
v1.0 ".
40D2500