Connecting To An External Amplifier - JVC I'Art Pro AV-48P775 User Manual

Quick Setup
Connecting to a Camcorder
You may connect a camcorder, game console or other equipment to your television by using
the front input jacks (Input 4) located under the front panel door. To access, pull on the door
to open it. You can also connect these using the television's rear input jacks, using the same
instructions.
INPUT- 4
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on
the front of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on
the front of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN on the front of the TV.

Connecting to an External Amplifier

Speaker
Amplifier
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier's manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
S-VIDEO VIDEO AUDIO
L / MONO R
OVER
- OR -
Speaker
MENU CHANNEL VOLUME SUPER
– + – +
FOCUS
OPERATE
CENTER
CHANNEL
INPUT
R
75Ω (VHF/UHF)
L
AV COMPULINK III AUDIO OUT
TV Rear Panel
Connections
CAMCORDER
19