Editing Index - JVC GV-PT2 Instructions Manual

40
EN

Editing Index

When you edit a source tape using Random Assemble Editing (available on selected JVC
camcorders and VCRs), you can print out the scenes at the Edit-In and Edit-Out points you've
registered. This allows you to make an editing index.
4
5
Preparation
Perform preparation referring to page 17.
IN
1 0:00:25
2 0:03:18
3 0:02:33
4 0:04:11
5
6
7
8
COUNTER
TOTAL
Random Assemble Editing
selection screen
If the camcorder's power goes off
before you press the Edit Start
button ...,
turn the camcorder's power off and
then on. The Random Assemble
Editing selection screen appears in
the camcorder's viewfinder display.
DIFFERENT TYPES OF PRINTING (cont.)
TITLE SOURCE MEMORY
FRAME
STABILISER
PRINT
MENU FORMAT MODE
OK CANCEL
OUT
0:01:05
0:03:31
0:02:53
0:04:11
0:01:13
7
3
CONNECT IMAGE SOURCE
1
(CAMCORDER OR VCR) TO PRINTER
(PAGE 12, 13)
Connect either the camcorder or the video
cassette recorder to the printer's REMOTE
PAUSE connector using the mini plug cord (or
a editing cable supplied with the camcorder).
SET EDIT-IN OR EDIT-OUT POINT OF
2
THE SCENE TO BE STORED
•When the scene to be printed is reached, set
Edit-in and Edit-out points with the
camcorder or VCR. Up to 16 scenes can be
set.
•For details, refer to the camcorder and VCR
operation manuals.
PRESS MODE
3
•MODE SELECT MENU appears.
•MODE SELECT MENU is not displayed when
the LAYOUT is set to any position other than
HORIZONTAL.