JVC GV-HT1U Instructions Manual page 37

Jvc mini video printer instructions
Hide thumbs Also See for GV-HT1U:
Table of Contents

Advertisement

MENU
MEMORY
SELECT
Paper
MENU
MEMORY
SELECT
NOTES:
•You can add a frame, produce multipix prints or add special effects.
•To print the same image again, press the PRINT button. One print is made each time the
PRINT button is pressed.
•To print a different image, perform operations in steps 5 to 8.
PRINT
SET
PRINT
SET
Print Operations
SET THE VIDEO SOURCE TO PLAYBACK MODE
5
•For details, refer to the instruction manual
supplied with the video source.
PRESS THE MEMORY BUTTON
6
WHEN THE IMAGE YOU WISH TO
PRINT APPEARS
•This action stores the image you wish to print.
•The message, "Please wait ..." is displayed on
the LCD panel while the image is being stored.
•The memory icon
conditions.
on: image data has been stored in the printer
off: no image data is stored in the printer
INSERT PRINTING PAPER IN PAPER
7
OUT/MANUAL FEED SLOT
•Slide in the printing paper with the printing surface
up as far as it will go without curling it.
•Unless the printing paper is inserted straight, it
will cause a paper jam.
PRESS THE PRINT BUTTON
8
•Gently press the edge of the printing paper into
the printer.
•Release the paper when it is pulled into the printer.
•The printer starts printing the stored image.
•The message, "Please wait ..." is displayed on
the LCD panel. Then the printer icon
appears.
•The printer icon
conditions.
on: image data is being printed
off: printing has been completed
•After printing the message "Remove paper" is
displayed.
When the paper is removed "Feed paper
manually" is displayed.
This display indicates that the printer is now in
the manual feed printing mode.
37
EN
indicates the following
indicates the following

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv-ht1

Table of Contents