Subscribe to Our Youtube Channel
Summary of Contents for Sipura Technology SPA-2002
-
Page 1: Configuration Guide
Sipura SPA-2002 Configuration Guide OUTBOUND CALLING Version 2.0 DocVersion: SPA-2002-IG-v1-0-052008... - Page 2 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright holder, is strictly forbidden. Trademarks used herein are the property of their respective owners. Sipura SPA-2002 Installation Guide Version 2.0 May 2008 Disclaimer The content of this manual is subject to change without notice and should not be construed as a commitment by the manufacturer, distributor, or service provider.
- Page 3 Sipura SPA-2002 Configuration Guide Table of Contents Introduction ..............1 Accessing the SPA-2002..........2 Configuration .............. 4 Configuration for Outbound Calling........4 Page i...
-
Page 4: Introduction
Sipura SPA-2002 Configuration Guide 1 Introduction This document is a configuration guide for the Sipura SPA-2002. Your SPA-2002 device must have firmware version 3.1.20 configured on it in order to complete calls on the network. Please obtain the latest firmware from www.sipura.com. This guide provides instructions for configuring of device settings for easy access to the calling network. -
Page 5: Accessing The Spa-2002
2. Using the telephone keypad, press the star key (*) four (4) times: You will be prompted to enter a code. 3. Enter 110# to obtain the IP address the SPA-2002 obtained via DHCP. If you are using a Static IP Address enter the appropriate code, followed by the pound (#) key. - Page 6 Sipura SPA-2002 Configuration Guide SPA-2002 MENU OPTIONS Action Code User Input Behavior Notes Enter IVR Menu **** None Do not press any other keys until you hear, “Configuration menu. Please enter option followed by the pound (#) key, or hang up to exit.”...
-
Page 7: Configuration
3.1 Configuration for Outbound Calling To configure the SPA-2002 for outbound calling: 1. Connect to the SPA-2002 by entering the device’s IP address in the Web browser’s Address bar. For instructions on obtaining the IP address, refer to section 2.0 Accessing the SPA-2002 in Section 2.0 of this Guide. - Page 8 Sipura SPA-2002 Configuration Guide IMPORTANT You must have a different account and PIN for Line 1 and Line 2. 7. Click the Use Auth ID drop-down menu, and click no. NAT Settings and Network Settings and SIP Settings and Call Feature Settings...
- Page 9 Sipura SPA-2002 Configuration Guide Proxy and Registration Subscriber Information and Supplementary Service Subscription Settings Sections 8. Scroll to the Audio Configuration section (as shown in the Audio Configurations and Dial Plan Sections screen on the following page), and change the following...
- Page 10 Sipura SPA-2002 Configuration Guide Audio Configuration and Dial Plan Sections 9. Click the Submit All Changes button to save the settings. Page 7...
Need help?
Do you have a question about the SPA-2002 and is the answer not in the manual?
Questions and answers