Advertisement
Get set, go!
Welcome to ACN Mobile Broadband. This guide details the simple steps to install your
ACN go! modem and connect to the Internet - you'll be up and running in no time!
Windows
1
Insert the SIM Card
Caution: The SIM card must not be inserted in, or
removed from the modem whilst it is connected to
a PC.
•
Remove the card socket from the modem.
•
Insert the SIM card into the socket with the golden
contact facing upward, as shown in Figure 1.
•
Flip the card socket and insert in the modem with
the SIM card facing down, as shown in Figure 2.
2
Connecting the modem to a PC
You should start up your PC before connecting your
modem for installation.
•
Your modem comes with two USB cables. Insert the
small connector of the 2-port (long) data cable into
the modem (After installation, you may use either
cable).
•
Insert the large connectors into two of the PC's USB
ports as pictured.
•
Once a successful connection has been established,
the network mode indicator on the modem will
flash blue.
The system will automatically detect the new hardware and display on the
status area of the desktop. This also indicates that the connection between the
modem and the PC is successful.
Installation
®
ACN Mobile Broadband Quick Start Guide
Figure 1
Figure 2
Advertisement
