Disassembly; Rear Cover Removal; Chassis Assembly Removal; Service Position - Sony KV-32HS500 Service Manual

1-1. REAR COVER REMOVAL

4 Screws
+BVTP 4 x 16

1-2. CHASSIS ASSEMBLY REMOVAL

1
Lift lever up on the right and left sides of the chassis
bracket and gently pull the chassis assembly away from
the bezel.
Pull up and rotate both the A and D Boards in order to
2
service the unit.
SECTION 1: DISASSEMBLY

1-3. SERVICE POSITION

— 12 —
KV-32HS500/32HV600/34DRC500/34XBR800/ 36HS500/
4 Screws
+BVTP 4 x 16
Rear Cover
6 Screws
+BVTP 4 x 16
1
CAUTION! - Heat sink on IC5004 is -15V. Care must be
taken not to allow heat sink to touch any other components.
2
Lift lever up on the right and left sides of the chassis bracket
and gently pull the chassis assembly away from the bezel.
3 Pull up and rotate both the A and D Boards in order to service
the unit.
4 When plugging in connector from MS Board to B Board at
CN3603 insure two brown wires are facing upward towards
neck assembly.
36XBR800/38DRC500/40XBR800/42DRC800