Advertisement
3. How to set the time
Setting the Clock
• The time can be set both when the power is on and off.
1 Press and hold the SET button. → The year display starts flashing.
2 While flashing, set each item with the DOWN/UP buttons.
4. Playing back from iPod
Setting the iPod on the unit
1 Insert the Dock adapter supplied with the iPod to the unit.
If the Dock adapter was not supplied with your iPod, purchase the Dock adapter from Apple Inc.
For details, visit the Apple's website.
<http://www.apple.com>
Dock adapter
(Supplied with your iPod or
to be purchased)
You can remove the dock
Connector well
adapter with your fingernail
by using this slot.
2 Connect the iPod to the connector plug of the unit.
• The connector plug is protected with a cover when it is first purchased. Please remove the cover before
operating the unit.
• When the iPod is not connected, insert the terminal cover. This prevents dust from entering and possibly
damaging the unit.
• Always set volume to the minimum level when connecting or disconnecting iPod.
• When you connect your iPod to the unit, make sure you insert it all the way.
• When disconnecting the iPod, make sure that the System is turned off.
n iPod Compatibility Chart
iPod touch 8GB/16GB/32GB
iPod nano (3rd Generation) 4GB/8GB
iPod touch (2nd Generation) 8GB/16GB/32GB
iPod nano (4th Generation) 8GB/16GB
iPhone 3G 4GB/8GB/16GB
iPod nano (2nd Generation) 2GB/4GB/8GB
iPhone 4GB/8GB/16GB
iPod nano 1GB/2GB/4GB
iPod classic 80GB/120GB/160GB
iPod (4th Generation) 20GB/40GB
iPod video (5th Generation) 30GB/60GB/80GB
iPod mini (2nd Generation) 4GB/6GB
iPod photo (4th Generation) 20GB/30GB/40GB/60GB
iPod mini 4GB/6GB
5. Listening to FM Broadcasts
Press
Functions
Switch FM stereo/monaural.
When there is too noisy in an FM stereo broadcast, you can reduce the static by
FM MODE
switching to monaural reception. Press again to switch back to stereo reception.
If the broadcast is not FM stereo, the sound becomes monaural, even if FM stereo is
selected.
• Switch channel display / frequency display. Channel display is automatically switched to
frequency display after approx. 10 seconds and will return to time display.
3/8
Frequency display
Channel display
* The displays may vary by region.
Select a channel from P01 to P20.
(The unit button can be used when channel display is selected.)
Change frequencies to tune in to FM radio station. (The unit button can be used when
¢
frequency display is selected.)
4
• Press and hold to search broadcast stations automatically. The search is finished
when the signal is received. Press again while searching to quit search.
3 Press the SET button.
• When the SET button is pressed, the flashing items will change in the following order.
Year → Month → Day → 12/24-hour time → Hour → Min. → time display
• The time is set when switching to time display from Minutes.
NOTES
• To modify the setting, start again from step 1.
• To return to the previous item, press the TIMER CANCEL button.
Listening to the iPod
1 Connect the iPod to the unit.
2 Turn the unit power on.
3 Select "iPod" with the SOURCE button.
When iPod is selected as sound source, it automatically starts playback.
Press
Functions
Playback/Pause
38
Press and hold this button to switch the iPod to sleep mode.
¢
Next song / fast forward (press and hold)
Previous song (Press this button during playback to jump back to the beginning of the
4
track.) / fast rewind (press and hold)
Charging the iPod
The iPod is charged while it is set on the unit when the Unit power is on.
• Connect the AC adapter to the Unit. The iPod battery is not charged while
the Unit is operated on the battery power supply.
• The iPod is charged regardless of the sound source selected on the Unit.
• See the iPod instruction manual about charging times.
NOTES
• This unit can only play the iPod audio.
You can use the iPod video function and hear the audio but cannot play the video.
• Do not carry the System with iPod connected. You might drop it down or it might cause damages to the
connector part.
• Do not touch or hit the iPod terminal pins or the connector pins directly. It might cause damages to the
connector part.
• If the iPod does not play correctly, please update your iPod software to the latest version. - For details
about updating your iPod, check on the Apple web site <http://www.apple.com>.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
• iPhone is a trademark of Apple Inc.
• JVC is not responsible for any loss of or damage to iPod that might result from the use of this product.
• Sound distortion may occur when playing back audio sources with high recording levels. When distortion
occurs, it is recommended to turn off the equalizer of the iPod. For information on operating the iPod, see
the iPod instruction manual.
• If you do not turn on the power of this unit and only connect the iPod to this unit, power may be supplied to
the iPod.
• "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple performance standards.
• "Works with iPhone" means that an electronic accessory has been designed to connect specifically to
iPhone and has been certified by the developer to meet Apple performance standards.
• Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
Listening to FM radio
4 / ¢
Stretch out the wire antenna located on the rear of the unit before using.
1 Turn the Unit power on.
2 Select "FM" with the SOURCE button.
3 Select a frequency with the 4 / ¢ button.
NOTES
• Press and hold 4 / ¢ button to search broadcast stations automatically. The search is finished when
the signal is received. Press again while searching to quit search.
• When there is too noisy in an FM stereo broadcast, you can reduce the noise by switching to monaural
reception. Press again to switch back to stereo reception.
Presetting Stations
4 / ¢ 3/8
1 Select "FM" with the SOURCE button.
2 Push the TUNER PRESET - + button to select the desired channel number (P01 to P20) to be registered.
3 While the desired channel number is displayed, press and hold the 3/8 button. → The channel number
starts flashing.
4 While the channel number is flashing, use the 4 / ¢ button to select the frequency (87.50 MHz to
108.00 MHz) of the station that you wish to register.
5 Press the 3/8 button → The selected frequency will be registered.
• To confirm registration, push the TUNER PRESET - + to select the registered channel number (P01 to
P20), and press 3/8 button to display frequency.
6 After presetting the station, you can easily select the channel with TUNER PRESET − +.
3
6. How to set the TIMER
Setting the alarm (ALARM-BUZZER)
1 Press the SET button to select "ALARM 1" or "ALARM 2". → The selected icon starts lighting.
2 Press and hold the SET button. → "ON" or "OFF" and
starts flashing.
3 Use the DOWN/UP button to select "ON" and press the SET button. →
starts lighting and the time
display starts flashing.
• When "OFF" is selected,
goes off and the alarm setting is disabled. The display returns to the current
time.
• To separate "ALARM 1" and "ALARM 2", set to on/off for each.
4 While flashing, set each item with the DOWN/UP button.
• When the SET button is pressed, the flashing items will change in the following order.
Hour → Min. →
TIMER PLAY time (10 to 30)
→ time display
• It is not necessary to set the "TIMER PLAY" time at this point.
5 Switch the ALARM switch to "BUZZER".
•
of the set alarm starts lighting on the display.
• To check the set time, switch the display to alarm time (ALARM 1/ALARM 2) by pressing the SET button.
• The buzzer sounds for three minutes.
• If the set time of "ALARM1" laps over that of "ALARM2", the buzzer of the earlier set alarm stops when
the latter one starts sounding.
Selecting iPod or FM radio for the alarm sound (ALARM-TIMER PLAY)
1 Set the alarm time.
(See steps 1 to 4 of "To set the alarm (ALARM-BUZZER)")
Hour → Min. → TIMER PLAY time (10 to 30) → time display
• You can set the duration of time between timer-on and timer-off from 10 minutes to 30 minutes in TIMER
PLAY time.
2 If the power is off, turn the unit power on.
3 Confirm that you can hear the iPod or FM radio.
• Set to an appropriate volume.
4 Switch the ALARM switch to "TIMER PLAY".
of the set alarm starts lighting and the selected source
is blinking on the display.
CAUTION:
• "AUDIO IN" cannot be selected as a source. Select another source.
• The "TIMER PLAY" does not work when the Unit power is turned off.
7. Playing back from other equipment
Connecting other equipment
Connect an external device to the AUDIO IN jack on the rear of the unit using a stereo mini plug cord (not
supplied) .
To audio output such as CD/
MD/digital audio player, etc.
NOTE
• Always turn the power OFF when connecting or disconnecting other equipment.
8. Troubleshooting
If you are having a problem with your System, check this list for a possible solution before calling for service.
In These Cases
Power does not come on.
• AC adapter is not inserted securely. Plug in securely.
• The batteries are exhausted.
No longer works.
Press the RESET button (see "Resetting the unit" below).
Cannot set the iPod.
• Is the Dock adapter properly mounted on the unit? Make sure to mount the Dock adapter properly.
Cannot operate iPod.
• Is the iPod firmly connected to the connector plug of the unit?
• Is the iPod properly functioning? Test the iPod functions in stand alone condition.
iPod cannot be charged.
• Is the iPod firmly connected to the connector plug of the unit?
• Is the AC adapter connected? The iPod cannot be charged while the Unit is operated on batteries.
Hard to listen to broadcasts because of noise.
The FM antenna is not properly extended and positioned.
When the volume level is manually set higher than "8", the unit
The unit's battery runs low (The "---" (Low battery) appears on the display). Replace the batteries with new ones.
automatically lowers the level to "8".
n Resetting the unit
If "Troubleshooting" does not eliminate malfunctioning (failure to operate or display properly, etc.),
press the RESET button on the rear of the unit with something having a sharp point, while the unit is turned on.
After pressing RESET button, unplug the AC adapter and wait a while before plugging it again.
• When using RESET button, make sure the lithium coin battery is loaded.
• While resetting the unit, the clock is also reset. Adjust the clock after resetting the unit.
Stopping alarm sound
u To pause the alarm (snooze)
Press the SNOOZE/LIGHT button while the alarm in sounding, when the alarm is set with either
"ALARM-BUZZER" or "ALARM-TIMER PLAY".
The alarm sound is temporarily stopped, and started again 5 minutes later. You can repeat this up to 10
times.
u To stop the alarm (BUZZER/ TIMER PLAY)
• Switch the ALARM switch to "OFF".
Deleting the alarm settings
1 Press the SET button to select the ALARM you want to delete.
2 Press and hold the SET button. → "ON" or "OFF" and
starts flashing.
3 Use the DOWN/UP button to select "OFF" and press the SET button.
• The alarm setting is deleted.
To turn off the System after a certain period of time (Sleep Timer)
1 Press the SLEEP button repeatedly to specify the time (in minutes) as follows:
10 20 30 40 50 60
OFF (Canceled)
2 Wait until the set time goes off.
• To check the time remaining before the shut-off time, press SLEEP button once.
If you press the button repeatedly, you can change the shut-off time.
• After the system is turned off with the Sleep Timer, you cannot operate any button other than the
SNOOZE/LIGHT button. To operate the system as usual, press
to turn off the power and then turn
on the power again.
NOTES
• Sleep Timer and "ALARM-TIMER PLAY" cannot be selected at the same time. If "TIMER PLAY" is
selected, Sleep Timer will be cancelled.
• Sleep Timer and "ALARM-BUZZER" can be selected at the same time.
Listening to external devices
1 Turn the unit power on.
2 Select "AUDIO IN" with the SOURCE button.
3 Start playback on the external device.
4 Adjust the volume.
Check the following points
u Changing batterie s for the Clock
Be sure to match the poles (+/-) correctly.
Side of the battery
Lithium coin battery
Plus terminal Plus terminal
(CR2025) (not supplied)
Press the tab to open
Insert the battery with pushing the plus
Close the cover in the
the cover.
terminal up to be sure the terminal
order shown by the
contacts the side of the battery.
numbers.
Time to change the battery
As the battery is running out, the display indication dims or the alarm may beep at the time the
alarm is not set at. Replace the battery in such cases.
4
Advertisement
