LG 2LD450 Owner's Manual page 26

PREPARATION
STAND INSTRUCTIONS
(For 32/42/47LD420, 32/42/47/55LD520, 55LD520C)
Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
(For 55LD520C, 55LD520)
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
3
Assemble the TV as shown.
4
Install the 4 screws into the holes shown.
!
NOTE
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
26
STAND BODY
M4 x 14
STAND BASE
M4 x 24
For 55LD520C
x 4
Tighten the stand with the four screws
(provided as parts of the TV).
or
Tighten the two of these four
x 2
x 2
screws and the two Torx plus
star head screws (provided as
parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a
star head driver bit (not provided as parts
of the TV).