Basic Functions Of Audio 20 - Mercedes-Benz Audio 20 Operating Instructions Manual

To select a setting: slide Z V Æ or turn
X
c V d the controller.
To save a setting: press W the controller.
X
The setting is stored and you exit the menu.
i
The balance setting is automatically reset
to the default value (0) when Logic 7
switched on or off.
i
Please bear the following in mind:
To provide the optimum audio experi-
R
ence for all passengers when Logic 7
switched on, the balance should be set
to the center of the passenger compart-
ment.
MP3 tracks should have a bit rate of at
R
least 128 kbit/s.
Surround-sound playback does not func-
R
tion for mono signal sources, such as the
medium wave range (MW) in radio mode.
If radio reception is poor, e.g. in a tunnel,
R
you should switch off Logic 7
wise, it may switch between stereo and
mono and cause temporary sound dis-
tortions.
On some stereo recordings, the sound
R
characteristics may differ from conven-
tional stereo playback.

Basic functions of Audio 20

®
is
®
is
®
. Other-
23