Honda 2000 CR-V Online Reference Owner's Manual page 89

Digital Clock
R (RESET)
H
M
The digital clock displays the time
with the ignition switch ON (II).
To set the clock:
1. Turn the ignition switch ON (II) to
display the time.
2. Press and hold the H button until
the hour advances to the desired
hour.
3. Press and hold the M button until
the numbers advance to the
desired minutes.
You can use the RESET button to
quickly set the time to the nearest
hour. If the displayed time is before
the half hour, pressing RESET
button sets the clock back to the
previous hour. If the displayed time
is after the half hour, pressing the
RESET button sets the clock for-
ward to the beginning of the next
hour.
For example:
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
Digital Clock, Center Table
Center Table
To use the center table, pull up the
outside edge of the table until it
latches. To store it, pull the lever and
lower the table.
Instruments and Controls
CONTINUED