Advertisement
Quick Links
Advertisement
Summary of Contents for DSty Walka
- Page 1 fold ™ HANDHELD TV Quick Guide v1.2...
-
Page 2: Table Of Contents
DStv Mobile Walka Step 1: Familiarise yourself with the hardware About DVB-H Step 2 : Charging your Walka DVB-H is a technology that delivers video to mobile devices at a resolution of 320 by 240 pixels. It uses a Step 3 : Activate your Walka... - Page 3 Agreement by doing the following; 1. Go to apps.dstvmobile.com/decoder/terms Incorrect antenna reception angle 2. Email care@dstvmobile.com 3. Visit your local DStv Service Centre and request a copy of the subscription Terms & Conditions or Incorrect antenna Walka End User licence agreement. reception angle...
-
Page 4: Introduction
Welcome to the exciting world of DStv Mobile. With your Please note that the default time zone in set for South Africa. Walka handheld TV you will be able to connect to DVB-H To change your time Zone settings do the following;... -
Page 5: Dstv Mobile Walka
Settings DStv Mobile Walka Included in the Walka box are the: You are able to adjust a number of settings on the Walka, these include the brightness, contrast and colour. 1. USB cable 2. USB charger To adjust the screen settings do the following;... -
Page 6: Step 1: Familiarise Yourself With The Hardware
2. Click on the Get DStv Mobile Tab, then click on Phones and devices. 3. Locate the Walka on the list of devices and then click on Read more. 4. Scroll to the bottom of the page and click on Download rmware. - Page 7 fold Factory reset (Hard reset) Back In the event that the soft reset does not work, then it might be necessary to perform a factory reset. To do this, hold down the menu/power button for 5 seconds while inserting a paper clip into the reset hole on the left of the device.
- Page 8 Resetting the Walka (Soft reset) If you experience an error with your Walka, you can reset it. To do this, you will need to locate the reset point on the left side of the device. Insert a paper clip into the hole. Once the device screen goes to black, remove the paperclip and the device will restart.
- Page 9 fold Channel Scan In the event you lose DVB-H reception while in a coverage Headphone port. Headphone port. area, you will be able to re-acquire the signal by Power/menu button. Pressing and holding the Power/menu button. Pressing and holding the rescanning for channels by doing the following.
-
Page 10: Step 2 : Charging Your Walka
Information Plate (iPlate) The iPlate will provide you with the channel title, start and The Walka comes partially charged. There are 2 ways to charge the Walka. Please note: charging via a power point end time and short synopsis of the programme you are is faster than charging via the USB port on your computer. -
Page 11: Step 3 : Activate Your Walka
Step 5 : Advanced Operation Step 3 : Activate your Walka TV Guide You can activate your Walka using one of the two options listed below. You can use the TV guide to view the list of programmes on a speci c channel for the next 24 hours. Access the TV Option 1: Guide by doing the following;... -
Page 12: Step 4 : Basic Operation
fold Step 4 : Basic operation MultiChoice customer care 1. To power the device, press and hold Power button (7) South Africa: +27 11 289 2222 until the LCD is turned on and you see the DStv Mobile hello screen. Ghana : +233 302 740 540 2.
Need help?
Do you have a question about the Walka and is the answer not in the manual?
Questions and answers