Summary of Contents for Valor Multimedia DD-806W Plus
Page 1
Note: 1) Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of DD-806W Dolby Laboratories. Plus 2) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Table of Contents Thank you for purchasing a Valor Multimedia product. We hope you will find the instructions in this user manual clear and easy to follow. If you take a few minutes to look through this user manual, you will have a better understanding of how to use all of the features on this infotainment system which will allow you to have a maximum enjoyment.
Select a Station························································································24 Precautions Auto Store (AS) ·······················································································24 To avoid Program Scan (PS) ··················································································24 DX and LOC Stations Signals······································································24 To prevent the risk of injury or accident, read the following precautions before installing and DVD Player Operation····················································································25 operating the unit. Insert/Eject Disc·······················································································25 Reset the Loading Mechanism·····································································25 On Safety...
Preparations Playable Discs Please The following types of discs/files are compatible: CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW Read all of the instructions below before beginning your installation. We recommend that you CD-DA, DVD Video have your unit installed by an experienced car audio/navigation system installer (MECP MP3 data certified).
Controls and Indicators Disconnecting the Battery To prevent a short circuit during an installation of a unit, please turn off the ignition and remove the negative (-) battery cable prior to starting the installation. Buttons Operation NOTE: If the unit is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable.
Remote Control Key Areas for the Touch Screen The key areas are outlined below, for DVD, VCD playback mode and so forth. Remote Control Functions A — Return to MAIN MENU B — Select previous chapter C — Select next chapter D —...
TFT Monitor Operation buttons Title Go back to title while playing DVD Rear Camera Mode Enter the main menu of the disc Root When the vehicle is placed in "Reverse", and a rear camera is connected to the unit, the monitor Turn on PBC while playing DVD will automatically switch to the camera input source.
Operation Instructions Balance & Fader You can adjust the sound from left to right and from front to rear. Power On / Off Press the POWER /VOL button to turn the unit on. You can also turn on the unit by pressing the button ( ) on the remote.
Setup Menu Standby 1. On the Main menu press the Standby icon. 2. In the standby mode, the screen will turn off while the audio output is still active. Main Menu 3. In the standby mode, touch the screen or press the Menu button to return the screen to the normal stage.
Brightness Date Setting Use this setting to adjust the proper brightness for your needs. Press the Date icon on the SETUP menu, and then select one of the following options Month/Day/Year to make the date adjustment. Contrast Use this setting to make adjustment to the sharpness of the picture. Time Setting Press the Time icon on the SETUP menu, and then select the hour or minute to make the time adjustment.
DVD Setting System Setting Press the DVD icon while on the SETUP menu. Press the SYSTEM icon while on the SETUP menu. Selecting a Setting for Adjustment Selecting a Setting for Adjustment Select one of the three setting options to make any adjustment. Select one of the three setting options to make any adjustment.
Load Factory Key Light Use this feature to reset the unit back to factory setting. You can change the front panel buttons display to 3 different colors (Red, Blue, Green). Beep TS Calibration (Touch Screen Calibration) If your touch control seems to be a little off. You can go into this setting to calibrate the touch You can turn the Beep sound ON or OFF.
Tuner (AM/FM) Operation Select one of the three setting options to make any adjustment. Soft Info (Software Information) This will show you the unit software version. Tuner Display Radio Region : Press to change between FM and AM. This will allow you to change the AM/FM Tuner to work in that country. (Preset USA). : Press to seek down.
DVD Player Operation tuning frequency one step at a time. Using Preset Stations NOTE: When properly installed, DVD video cannot be displayed on the main screen unless the 12 preset buttons are used to save your favorite stations for each band. First 4 saved stations parking brake is applied.
VCD Track Search : Press to return to DVD main menu Time – Go to specific time in the current track Track Search Track – Go to specific track : Press to select Title, Chapter, and Time. Time - - : - - : - - Track - - / - - : Press to enter EQ setup.
Changing Subtitle Language VCD Playback Information If you are watching a disc that contains multiple languages subtitles, press the SUBT button on The following information is displayed at the middle of the screen during VCD playback: the remote control to choose the language in which you would like the subtitles to appear. You can also touch area E, and then press this button.
CD/MP3/WMA/JPEG Operation Playing CD Files After inserting a CD disc, a file will play in the sequence of the directory. During playing back, you can press the numeric button on the remote control or press a track that you would like to Instructions for Insert/Eject, Play/Pause, Stop Playback, Track Selection, Fast Forward/Fast play.
FLASH DRIVE Operation CARD Operation Accessing the Flash Source Accessing CARD Source 1. To switch to FLASH source, press the Menu button on the front panel and press the Flash 1. To switch to CARD source, press the Menu button on the front panel and press the CARD Drive icon or press the (SRC) button on the remote control until the FLASH appears at the top of icon or press the (SRC) button on the remote control until the CARD appears at the top of the the screen.
Bluetooth Operation Bluetooth User Interface Dial Interface Before using the Bluetooth Before using the Bluetooth, it is necessary to perform the following steps. 1. Go to the Main menu and select the “SET UP” icon, select the “BASIC icon” option and select “Bluetooth”, make sure the “On”...
A2DP Making a Phone Call There are four ways to make a phone call from this unit: 1. You can enter the phone number using the numeric keypad on the screen of the unit and press the green “pick up” button on the screen or on the remote control press the “OK”...
Camera Mirror Troubleshooting Problem Cause Corrective Action GENERAL Radio Fuse blown Install the new fuse with the correct specification Car battery fuse blown Install the new fuse with the Unit will not power on correct specification Illegal operation Press the RESET button located at the top left corner of the front panel Battery depleted...
Remote control Disc is warped or scratched Use a disc that is in good condition Battery is covered with Pull out the insulation tape Disc is dirty or wet Clean the disc with a soft cloth Remote control insulation tape Incompatible disc is used Use compatible disc does not function...
Specifications Install the battery Main Amplifier Power Output: 45 watts X 4 channels into 4-ohms @ < 10% THD+N Signal to Noise Ratio: 70dB below reference. (Reference: 1 watt, 4-ohms) Frequency Response: 20 Hz to 20 kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.4VDC DVD/CD Player Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW,...
Accessory List General Auxiliary Input impedance: 10k Power Supply: 10.5 to 16V DC, negative ground Fuse: 10-amp, mini ATM type Description Image DIN chassis dimensions: 7" X 7" X 4" (178mm x 178mm x100mm) Frame * Specifications subject to change without notice. USB cable Power harness Remote control...