Commodore 1526 Service Manual page 37

----------------------~--
- -
MECHANICAL DISASSEMBLY (Continued)
12. To remove the paper roller assembly:
q
tl
G
12.1-(1
~
12.1
Remove the
2
paper
holding springs from the
right and left frames.
12.2 Remove the left liE" clip
and pull the paper roller
axle to enable it to slide
over the frame pins.
13. To remove the front carriage guide:
13.1
The front guide pillar is
removed by loosening
the hex nuts at each
end. Next, slide the pillar
"from its slots in the right
and left frame plates.
14.
To remove the head shaft lever and right side frame plate:
14.1 Remove the hex nut at the right end
of the carriage pillar. Pull the lever
from the shaft.
14.2
Remove the right side roller plate
spring from behind the paper guide.
14.3
Remove the remaining screws in the
frame plate. The frame must slide
back, out of the base, to be re-
moved.
FRAME
PLATE
34