Thetford Aspire Oven - Auto-Trail Tracker Owner's Handbook Manual

24

Thetford Aspire Oven

Thetford Aspire Oven
The Thetford Aspire is fitted with three gas
burners, one 230V hotplate and gas oven.
The gas burners are fully adjustable between
simmer and full flame, and the oven ranges
from 130˚C to 240˚C.
The electric hotplate has six temperature settings.
The oven, grill and burners operate off the on
board LPG supply, the 230V electric hotplate can
only be used when the vehicle is plugged into a
230V electrical supply.
Gas Operation
Before operating the appliance on gas ensure
that the valve on the gas cylinder open and that
the individual safety valve for the oven is open.
Hinged Glass Lid
Please note that the hinged glass lid must be
in the upright 'OPEN' position whilst using
the oven.
Please ensure that all burners and hotplates
are turned off before closing the lid.
www.auto-trail.co.uk
Using The Hotplate Gas Burners To Light
• Push in the control knob and rotate to the
highest setting.
• Press the electronic igniter on the oven facia
to light the burner. If the burner has not lit
within 15 seconds the control knob should
be released and the burner left for at least
1 minute before a further attempt to light
the burner is made.
To Turn OFF
• Turn the control knob until the line on the
control knob is aligned with the dot on the
control panel.
• Always ensure that the control knob is in the
'OFF' position when you have finished using
the hotplate burners.
Using The Electric Hotplate
Before using the electric hotplate, ensure that
the vehicle is plugged into a 230V electrical
supply and that the isolation switch is in the
'ON' position.
Switching ON
• The hotplate control is numbered from 1 to 6.
• To turn it on rotate the knob either clockwise or
anti clockwise to the required position.
• Position '1' is the coolest setting, position '6' is
the hottest.