Choosing The Channel Type; Storing Channels Automatically - SOLE SPTV42AS1D Owner's Manual

Choosing the Channel Type

Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV. (i.e., an antenna, a standard cable system).
Press Menu/Set button to display the main
1
OSD menu.
Select the TV main menu.
2
3 Press Menu/Set button to enter the sub menu.
Select Channel Type(ATV) or Channel Type(DTV).
4
5 Select the Channel Type(ATV) Menu/Set button
and press Exit button. You can select Channel
Type(Air/Cable) and System Type(NTSC/PAL-M)
in Sub Menu "Channel Type".
Select the Channel Type(DTV) with
6
button and press Exit button.
You can select directly Air / CABLE / HRC / IRC.

Storing Channels Automatically

Press Menu/Set button to display the main
1
OSD menu.
Select the TV main menu.
2
Press Menu/Set button to enter the sub menu.
3
Select Auto Scan with
4
press Menu/Set button on the remote control.
Then the tuning bar will appear and scanning
will start.
Auto Scan
Air / Cable
Channel
Find Channel
Broadcasting
(HDTV Scan)
Setting the Channel
buttons and
Cable
0
0
HDTV
9 %
STOP
TV
Channel Type(ATV) CABLE
Channel Type(DTV) CABLE
Auto Scan
Add/Del
Fin Tune
Edit
Move Adjust
TV
Channel Type(ATV)
System Type
Move Adjust
TV
Channel Type(ATV) CABLE
Channel Type(DTV) CABLE
Auto Scan
Add/Del
Fin Tune
Edit
Move Enter
Auto Scan
Air / Cable Cable
Channel
Frequency 255.865MHz
Find Channel
Broadcasting Analog TV
(ATV Scan)
Add
Exit
Air
NTSC
Exit
Add
Exit
13
0
9 %
STOP
29