TV One 1T-CT-647 Instruction Manual

TV One 1T-CT-647 Instruction Manual

7 port hdbaset-lite transmitter

Advertisement

Quick Links

Instruction Manual
1T-CT-647
7 Port HDBaseT-Lite Transmitter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1T-CT-647 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TV One 1T-CT-647

  • Page 1 Instruction Manual 1T-CT-647 7 Port HDBaseT-Lite Transmitter...
  • Page 2: Table Of Contents

    Table of Contents Introduction Checking Package Contents Specifications Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information...
  • Page 3: Introduction

    Thank you for purchasing this HDMI over single Cat.6 product from tvONE. The product group consists of a 1T-CT-647 Transmitter (which is normally coupled with a 1T-CT-642 Receiver that employs HDMI v1.4 capability and the HDBaseT-Lite technology to allow transmission of uncompressed, 1080p high definition television signals over a single Cat.5e or Cat.6 cable - a type of cable typically employed for Ethernet computer...
  • Page 4: Checking Package Contents

    Features The 1T-CT-647 HDMI over single Cat.5e/Cat.6 Transmitter has many features that enable it to perform in a superior manner. Among these features you will find: HDMI with 3D, 4k(24Hz/30Hz) support; HDCP and DVI compliant  Uncompressed HDMI signal distribution to 60 meters (197 feet) ...
  • Page 5: Specifications

    SPECIFICATIONS: Video I/O 1T-CT-647 Tx – HDMI Input 1x via HDMI Connector 1T-CT-647 Tx – HDMI Output 1x via HDMI Connector Cat.5e/Cat.6 Cable I/O 1T-CT-647 Tx -- Cat.5e/Cat.6 Output 7x via RJ45 Connector Additional I/O Connectors 2x 3.5mm mini-jack (Infrared), 1 mini USB (Service) Supported Signals &...
  • Page 6: Connecting The Hardware

    Keep the HDMI cable as short as possible. 3. (OPTIONAL) If there is an IR controllable device on the 1T-CT-647 side that you wish to control remotely from the receiver side, connect the IR emitter device to the IR1 OUT connector on the 1T-CT-647.
  • Page 7: Operating The Unit

    2. (OPTIONAL) If there is an IR controllable device on the 1T-CT-642 side that you wish to control remotely from the 1T-CT-647 side, connect the IR emitter device to the IR2 OUT connector on the 1T-CT-642. If there is an IR controllable device on the 1T-CT-647 side that you wish to control remotely from the 1T-CT-642 side, connect the IR Receiver device to the IR1 IN connector on the 1T-CT-642.
  • Page 8: Troubleshooting

    EDID Operation The 1T-CT-647’s default factory setting is “TV”. Leave the switch in this position so that the unit can sense the proper EDID setting based on the display’s requirements. When first powered on in “TV” mode, the 1T-CT-647 will detect and store the EDID from Cat5e/6 output port 1 and it will send that output’s display format information to the...
  • Page 9: Limited Warranty

    LIMITED WARRANTY tvONE warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase. The warranty term for specific product lines is defined below. 1.
  • Page 10: Regulatory Compliance

    REGULATORY COMPLIANCE The 1T-CT-647 HDMI over single Cat.6 cable product has been tested for compliance with appropriate FCC and CE rules and regulations. The power adaptor/supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, regulations and/or guidelines.

Table of Contents