Advertisement
Quick Links
Advertisement
Related Manuals for MSI MS-1034
Summary of Contents for MSI MS-1034
- Page 1 Installation Guide Copyright © 2006 MSI Computer Corp.
- Page 2 Overview: MS-1034 is shipped out as a bare bone. Some of the components are equipped while some are not. This installation guide provides you with the information of notebook hardware setup. Before assembling your Notebook, please prepare the installation tools and appropriate items. If you are not clear about the items, please contact your dealer for more information.
- Page 3 Rear View Right view Left view...
- Page 4 Step 1: Installing CPU 1-1 Prepare a proper size flat head screw driver. Un-screw the screw until it can not go any further. 1-2 a.b.Locate the golden cut edge on the CPU’s upper right-hand corner. Then insert the CPU into the Socket !!!The CPU will only fit in the correct orientation!!! 1-3 Adjust the CPU socket by turning the screw.
- Page 5 Step 2: Installing CPU Heat Sink and Fan 2-1 Use the Heat Sink and Fan that is provided. 2-2 Slide the CPU Heat Sink into position over the CPU. !!! Be sure that there are no wires underneath the Heat Sink. !!!
- Page 6 2-3a.b.c.d.e. Align the five screws with the screw holes next to the CPU. You may need to slide the Heat Sink to the side to align. Tighten the five screws in a numerical order. !!! Improper connection of the CPU heat sink will damage the notebook and CPU!!!
- Page 7 2-6 After making sure that all screws are tight, connect the CPU Fan. !!! Connect the wires correctly. There is only one way to connect. DO NOT force in. !!! !!! Warning: failure to connect the fan may cause damage to the CPU or the notebook!!!
- Page 8 Step 3: Installing Notebook Memory 3-1 Align the memory module to the DIMM socket 1. !!! Memory module can only fit in one direction due to the keyed notch. Wrong orientation will cause improper installation and may damage the memory modules or DIMM sockets!!! 3-2 Push down the memory module gently until the metal-locking levers aside from the DIMM socket 1 is fastened.
- Page 9 3-4a.b.c.d.e.f. After installing the CPU and Memory, gently snap the cover until it locks into position. Lock down the cover by applying 4 screws. Step 5: Installing Notebook Hard Drive (HDD) 5-1a. Please use the given HDD shielding tray.
- Page 10 !!! Hard Drive may not be included !!! 5-2 Insert the HDD into the given HDD shielding tray. !!! Improper alignment will cause damage to the HDD and the Notebook!!! 5-3a.b. After inserting the shield over the HDD, fasten with the screws that are provided. 5-4a.b.
- Page 11 !!! Be sure to have HDD Plastic puller face up!!! !!! Due to keyed notches on the HDD Shield, HDD will not fit correctly if installed on an angle !!! 5-5 a.b.c. After installing the HDD, slide the cover into position. Lock down the cover by applying 2 screws.
- Page 12 !!! Failure to apply 2 screws may cause HDD assembly to fall off in Notebook HDD area and will damage the HDD and Notebook!!! Step 6: Installing the Battery 6-1a.b.c. Align battery to the battery slot and push down the battery gently.
- Page 13 Hint: If you wish to remove the battery, make sure the battery locking mechanism is in “Unlock” position. Step 7: Final Check 7-1 Check all steps and make sure to fasten all the components and screws before powering on your Notebook.
- Page 14 8-2 Under “BOOT” menu in the BIOS Setup Utility, press <Enter> to select the first boot device. Have the first boot device as “CD/DVD.”...
- Page 15 8-3 Insert a Bootable OS CD into the OSD tray. 8-4 To save/exit the BIOS Setup Screen, go under the “Exit” menu press <Enter> under “Save Changes and Exit.” Press <Enter> under the window that pops up to save/exit.
- Page 16 8-5 After seeing the Intel Logo, immediately press “Enter” in order to install OS and follow the given setup messages. 8-6 After installing OS, insert the given Driver CD to install the appropriate drivers in order. Hint: If you have any questions related to the BIOS Setup procedure or if there are any other issues, please contact your local retailers or national distributors for further support.