Remote Control Key Functions - LG DU-52SZ51D Owner's Manual

Remote Control Key Functions

Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the TV.
Illuminates the remote control buttons.
Selects: Antenna,Cable,Video1-3,
Component 1-2, RGB-DTV (or RGB-PC),
HDMI/DVI input sources.
COMP/RGB/HDMI
Selects: Component 1-2, RGB-DTV (or RGB-
PC), HDMI/DVI input sources.
NUMBER buttons
Used to enter a program number for multiple
program channels such as 2—1,2—2,etc.
Switches the sound on or off.(Refer to p.15-20)
VOLUME UP/DOWN
Increases/decreases the sound level.
Moves forward of backwards in 24 hour
increments in the TV Guide On Screen.
When you watch the TV, displays information
on top of the screen. Not available in
Component 1-2, RGB and HDMI/DVI mode.
Selects MTS sound: Mono, Stereo, and SAP
in Analog TV mode. Change the audio lan-
guage in DTV mode.
THUMBSTICK (Up/Down/Left/Right/ENTER)
Allows you to navigate the on-screen menus
and adjust the system settings to your pref-
Brings up the main menu to the screen.
Brings up the Guide to the screen.
Adjusts the factory preset picture
according to the room.
Adjusts screen position, clock, and
phase in PC mode.
(Refer to p.15-20)
Selects the sound appropriate
for the program's character.
Displays the digital signal strength.
Freezes the currently-viewed picture. Main pic-
ture is frozen in PIP/POP/Twin picture mode.
Installing Batteries
• Open the battery compartment cover on the back side and install the batteries
matching correct polarity (+ with +, - with -).
• Install two 1.5V AA batteries. Don't mix old or used batteries with new ones.
Replace cover.
9 DLP Projection TV
LIGHT
TV/VIDEO
DASH
MUTE
MUTE
DAY +
VOL
DAY -
DAY+/DAY-
SAP
INFO
INFO
SAP
MENU
TV GUIDE
PLAY PAUSE
REW FF
erence.
PIP PIPCH-
MENU
VIDEO SOUND
TV GUIDE
ADJUST
FREEZE
VIDEO
ADJUST
SOUND
SIGNAL
FREEZE
MODE
Selects the remote operating mode: TV,
VCR, DVD, CABLE, HDSTB or AUDIO.
Select other operating modes, for the
remote to operate external devices.
POWER
Turns your TV or any other programmed
equipment on or off, depending on mode.
MODE
1394 (Refer to p.15-20)
FLASHBK
Tunes to the last channel viewed.
SURF
Use to scroll the Surf channel list.
CHANNEL UP/DOWN
FLASHBK
Selects available channels found with EZ
scan.
SURF
PAGE UP/PAGE DOWN
PGUP
CH
Moves from one full set of screen informa-
PGDN
tion to the next one.(Only Ch.Edit, Ch.Block,
RATIO
TV Guide menu)
CC
RATIO
Changes the aspect ratio.
CC
Select a closed caption: Off, CC1-4, Text1-4
ENTER
in Analog TV mode.
Off, English,Spanish, French in DTV mode.
Not available in Component 1-2, RGB and
EXIT
HDMI/DVI mode.
TIMER
EXIT
RECORD
STOP
Clears all on-screen displays and returns to
TV viewing from any menu.
SKIP
TIMER
Lets you select the amount of time before
PIPCH+ PIPINPUT
your TV turns itself off automatically.
SIGNAL SWAP
VCR/DVD BUTTONS
Control some video cassette recorders or
DVD player("RECORD" button is not avail-
able for DVD player or IEEE1394 mode).
PIP
Switches between PIP, POP (Picture-out-of-
Picture) and Twin picture modes.
PIPCH-/PIPCH+
Changes to next higher/lower channel for the
sub picture. Available only in PIP and Twin
picture modes.
PIP INPUT
Selects the input source for the sub picture.
Available only in PIP and Twin picture modes.
SWAP
Exchanges the main/sub picture. Available
only in PIP and Twin picture modes.
Introduction
Owner's Manual 9