Table of Contents
Advertisement
If the MD or each track has a title
The disc title and track titles will be shown at the
lower portion of the display window (Title longer than
11 characters scrolls to show the entire title).
• DO NOT insert any foreign matters.
2
Press 6 (play/pause) button on the MD recorder
or MD 6 (play/pause) button on the remote
control.
Each track of the MD starts playing back, and playback
information appears in the display window as follows:
Current track number
Elapsed playing time
• To stop playing back for a moment, press 6
(play/pause) button on the MD recorder.
The playback time starts blinking in the display
window.
• To resume playback, press 6 (play/pause)
button again.
Playback continues from the point where it was
stopped for a while.
3
Press 7 (stop) button to stop playing back the MD.
4
Press 0 (eject) button on the MD recorder to remove
the MD.
• Pressing 0 (eject) button during playback directly,
the MD recorder stops playback and ejects the MD.
«
Searching and Skipping Tracks
While playing back an MD, you can do the following
operations.
To search and skip to a particular point in a track
During playback, press and hold 4 / ¢ button to meet
the desired passages in a track:
Press and hold ¢ button:
Fast forwards in the track.
Press and hold 4 button:
Fast reverses in the track.
UP/DOWN button on the remote control is also
available to search and skip operations.
To go to another track
Before or during playback, press 4 / ¢ button
repeatedly:
Press ¢ button:
Skips to the beginning of the next and succeeding
tracks.
Press 4 button:
Goes back to the beginning of the current and
previous tracks.
Rotating MULTI JOG dial clockwise also changes
the tracks forwards quickly, while rotating it
counterclockwise the tracks reverse quickly (< / >
button on the remote control also available).
Continued
8
Advertisement
Table of Contents
