Installing The Usb Adapter; Keeping Track Of The Bluetooth Adapter; Moving The Bluetooth Adapter - Interwrite Learning Interwrite Pad Getting Started

Interwrite Pad
14
TM

Installing the USB Adapter

Plug the USB Adapter into one end of the USB cable and insert the other
end into one of the USB ports
It cannot be plugged into a keyboard USB port on the Mac. The operating
system will auto-detect and configure the new hardware device.

Keeping Track of the Bluetooth Adapter

The Velcro button in your Bluetooth Comm Kit is used to attach the USB
Adapter to the side of your monitor, or to the lid of your laptop. Pull the
button apart, remove the paper backing from both pieces, and stick one piece
to the back of the USB Adapter and the other to the monitor or laptop lid. Use
a USB extension cable to connect to the USB port.
Do not install the USB Adapter behind metal enclosures, as this
will limit performance. Metal serves as a shield and reduces the
signal strength. Mount the Adapter so the top of the unit is
positioned above the computer or monitor case. Use a USB cable
extender when additional length is needed to mount the USB
Adapter away from metal or other enclosures.
Moving the Bluetooth Adapter to Another Machine or
USB Port
The Adapter-to-USB-port and Bluetooth software installation (Windows only)
must be performed by a user with Administrator privileges. If the configura-
tion is changed, that is, if the Adapter is moved to another USB port on the
computer, or if a different USB Adapter is installed in the USB port on that
computer, the process must be managed by the Admin.
on your computer.
Getting Started