Preparing For Use - Remington i-LIGHT PRO User Manual

Intense pulsed light hair removal
Hide thumbs Also See for i-LIGHT PRO:
Table of Contents

Advertisement

ENGLISH
To reduce the risk of injury or death by electric shock:
• The appliance must only be used by or under the supervision of a responsible adult.
• Use and store the appliance out of reach of children.
• Always unplug the unit from the electrical outlet immediately after using.
• Do not use near water.
• Do not place or store this appliance where it can fall or be pulled into a tub or sink.
• Do not place or drop into water or other liquid.
• Do not reach for the unit if it has fallen into water or other liquid. Unplug unit immediately.
• Do not reach for the unit if it has become wet. Unplug unit immediately.
• Unplug the unit before cleaning it.
• Keep the unit dry at all times.
• If you move the unit from a very cold to a very warm environment, wait approximately 2 hours before using it.
• Do not use accessories or attachments other than those we supply.
• Keep the power plug and cord away from heated surfaces.
• Do not twist or kink the cable, and don't wrap it around the appliance.
• If the cable is damaged, it must be replaced by the manufacturer, its service agent, or someone similarly
qualified, in order to avoid hazard.
• Use and store the product at a temperature between 15°C and 35°C.
• Do not leave the appliance unattended while plugged in.

Preparing for use

i-Light Unit Diagram Reference (page 2)
1 Power Switch
2 Power Inlet
3 i-Light Base Unit
4 i-Light Hand Piece
5 Flash Button
6 Intensity Level Selection Button
7 Cool Down Mode Indicator
8 Bulb Status Indicator Display
9 Intensity Level Selection Display
10 Skin Sensor
11 i-Light Hand Piece Cord
12 Flash Window
13 Skin Contact Sensors
6
IPL6000_IB_BOOK_UK_ONLY.indd 6
1/12/11 14:55:49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents