1. Manuals
  2. Brands
  3. ASTEL Manuals
  4. DVR
  5. DT-1600
  6. Manual

ASTEL DT-1600 Manual

Dt/mt series digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

DT/MT Series
Digital Video Recorder
Manual
(Rev.3)
DT-1600 / DT-800
MT-1600 / MT-800 / MT-400
Wednesday, February 29, 12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DT-1600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ASTEL DT-1600

  • Page 1 DT/MT Series Digital Video Recorder Manual (Rev.3) DT-1600 / DT-800 MT-1600 / MT-800 / MT-400 Wednesday, February 29, 12...

  • Page 2: Compliance Notice Of Fcc

    WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 IMPORTANT SAFECUARDS 1. Read Instructions 13. Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to All the safety and operating instructions should be read before the qualified service personnel under the following conditions: appliance is operated. A.

  • Page 4: Table Of Contents

    INDEX 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS 1. SAFETY CAUTIONS ---------------------------------------------- 1.1 Power Source 1.1 Power Source 1.1 Power Source 1.1 Power Source 1.1 Power Source...
  • Page 5 INDEX 5.2 CAMERA SETUP 5.2 CAMERA SETUP 5.2 CAMERA SETUP 5.2 CAMERA SETUP 5.2 CAMERA SETUP 5.2 CAMERA SETUP ----------------------------------------------------- ----------------------------------------------------- ----------------------------------------------------- 5.2.1 CAMERA 5.2.1 CAMERA 5.2.1 CAMERA 5.2.1 CAMERA ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- 3.2.2 PTZ ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- -----------------------------------------------------------...
  • Page 6 INDEX 6. SEARCH 6. SEARCH 6. SEARCH ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- 6.1 Search Screen 6.1 Search Screen 6.1 Search Screen 6.1 Search Screen 6.1 Search Screen ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- -------------------------------------------------------...

  • Page 7: Safety Cautions

    1. SAFETY CAUTIONS ※ Follow these instructions to keep the user safe and prevent property damage. Read them carefully before the use of the product. The responsibility falls on the user to install and use the product properly. 1.2 Installation-related 1.1 Power Source-related Do not place candlelight or cigarette light on top Insert the power plug fully and firmly into the...

  • Page 8: Cleaning And Usage

    1.3 Cleaning and Usage-related When cleaning the product, unplug the power Unplug the power plug during lightning, cord and gently wipe using a soft cloth. Do not thunderstorm or when not in use for long directly spray water on the product or do not periods of time.

  • Page 9: Outline

    2. OUTLINE 2.1 Functions This DVR is divided 4ch, 8ch and 16ch by model. In case of DT Series, it is Hybrid DVR which supports 4channel IP camera (SD/HD class). The image of IP camera can be checked Live view, Playback and Backup on SMS software. This DVR provide superior video image quality on Live view and Playback.

  • Page 10: System Organization

    2.2 System Organization CAMERA/IP Camera LCD/VGA PTZ KEYBOARD MONITOR Video Network input MAIN/SPOT Video out MONITOR Audio Input Alarm Sensors Audio Input Output SIREN SENSOR SPEAKER Wednesday, February 29, 12...

  • Page 11: Dvr Organization

    3. DVR ORGANIZATION 3.1 Front Panel Description NOTE: Turn on the DVR after connecting the power cord, camera input and monitor completely ▪ DT- Series / MT- Series Front panel Direction Key / Panorama playback Direction Key / Smart USB PORT playback Display/Recording Menu/ESC...

  • Page 12: Display Button

    ※ Front Button The front panel of DVR is similar as normal VCR or Multiplexer and the functions are also similar . Front buttons have various functions and are used for DVR initial setting and others. Please refer to the below explanation. NUMBER buttons (0 ~ 9) Displayed selected camera number to full screen.

  • Page 13: Enter Button

    , ▶ ) Direction buttons (▲, ▼, This buttons are used when move to other menu or change the position of the CAMEO screen. In PTZ mode, it is used PAN/TILT function. ▲ : In Playback mode, it is Panorama search function button. In PTZ mode, it is used to move the camera to up.

  • Page 14: Real Panel

    3.2 Real Panel 3.2.1 DT Series 1 Main out Analog camera 16 Loop out RS-232 RS-485 3 Spot out Input Power On/off 16 Audio in AC Inlet 4 Alarm out 16 Sensor Input Switch 1 Audio out IP camera HDMI Monitor VGA out 1 x e-SATA Network...

  • Page 15: Mt Series

    3.2.2 MT Series 1 Main out Analog camera 16 Loop out RS-232 RS-485 2 Spot out Input Audio In / Out 4 Alarm out Power On/off AC Inlet Network Switch VGA out (Option) HDMI Monitor 16 Sensor Input Wednesday, February 29, 12...

  • Page 16: Remote Controller

    3.3 Remote Controller RECOR DISPLA ROTATE MENU LOCK(LOG-OUT)/ NUMBE REPEAT Direction Key /Panorama Play Direction Key / ENTE Reverse Play ▶ Direction Key / Fast Reverse Play Play/ PTZ ▼ Direction Key /Smart Play PAUSE Fast Forward Play / PLAY BACKUP SEARCH PTZ ZOOM...

  • Page 17: Live

    4. LIVE 4.1 Live Screen Execution Information Message Camera Name Record Status Icon Live Screen PTZ Control Information Screen Expand/ Reduction Window Backup Progress Status(%) Current Date and Current Channel Current Event Information Time Information Icon Icon Sequence Icon - Record Icon (Red) - Video-loss Icon When record in live screen.

  • Page 18: Top Menu

    4.1.1 Top Menu In live screen, if button of the remote controller or front panel is pressed, or if the mouse cursor is placed over the end of the top area, the top menu is appeared. Search Backup Status Setup Log-out 4.1.2 Bottom Menu In Live screen, if ▼...

  • Page 19: Cameo Menu

    4.1.3 CAMEO Menu In live screen, if the ENTER button of the remote controller or front panel is pressed, a blue square cursor will be appeared. If the ENTER button is pressed again, the CAMERA menu will be appeared. ▪ CAMEO CHANGE : The live camera can be changed to the selected channel. If the camera number is selected at the pop-up menu shown below, the camera is changed to the selected channel.
  • Page 20 ▪ PTZ : PTZ Camera should be installed otherwise the PTZ menu is not activated. The following picture will be appeared when select PTZ menu. ※ Using Mouse : On the above menu, when click the right button of mouse, the control screen for Menu, Zoom, Focus and Iris will be appeared.
  • Page 21 - SPEED SETUP : Set the PTZ camera speed. ( 1 to 8) NOTE: If the mouse is used to move the PTZ camera, the movement speed depends on the position of the mouse. As the mouse pointer moves away from the center, speed becomes faster. - PRESET SETUP : Set the preset position.

  • Page 22: Setup

    5. SETUP In this category, there are General, Camera, Event, Schedule, Ethernet and System Information. On the Top menu, select the [SETUP] menu. After select the menu, the following Log-in window will be appeared. Enter the password by the key buttons and press the ENTER button.

  • Page 23: General

    5.1.1 GENERAL [SYSTEM] ▪ VIDEO FORMAT : Set the Camera Type (NTSC / PAL) If select AUTO menu, DVR recognize camera type automatically. NOTE: If NTSC and PAL cameras are connected simultaneously, error may occur. ▪ LANGUAGE : Select the language. (English, Germany, French, Spanish, Japanese, Chinese, Italian, Russian, Dutch and Korean) ▪...
  • Page 24 5.1.1 GENERAL [DATE / TIME] ▪ DATE FROMAT : Select the data format. (YY/MM/DD) / (MM/DD/YY) / (DD/MM/YY) ▪ TIMEZONE : Select the timezone and DST. The city which don’t use DST is set to [OFF] automatically. ▪ DATE DISPLAY : Display date on live screen or not. ▪...

  • Page 25: Alarm Out

    5.1.2 ALARM OUT ▪ SIGNAL : Select on/off to use alarm by channel. ▪ ALARM SET TEST : Check the alarm connection whether it works properly or not. Press the [SET] button then alarm device will be operated. ▪ ALARM CLEAR TEST : Press the [CLEAR] button then alarm device will not be operated. 5.1.3 DISK ※...
  • Page 26 5.1.3 DISK [CHECK / USB] ▪ EARLIEST RECORD : Display the earliest recorded data information. ▪ LATEST RECORD : Display the latest recorded data information. ▪ DISK CHECK : Check the data from the earliest recorded to the latest recorded. ▪...
  • Page 27 [RAID] ※ This function for only DT series. ▪ RAID SETUP : Select the RAID level (RAID0, RAID1 and RAID5). ▪ RAID : Display RAID on/off status. ▪ DISK STATUS : Display disk status. ▪ RAID STATUS : Display RAID status. ▪...
  • Page 28 When setup the RAID, above message will be appeared. After select the “V” mark, DVR will be rebooted. ※ Rebooting for RAID, booting time is longer than normal. (About 5 minutes) !WARNING ※ When RAID is built, all data of HDD will be deleted. ※...
  • Page 29 ※ RAID 0 ▪ For building RAID Level 0, it will take about 5 minutes. ▪ Displayed with [GOOD], if the building is finished without any problem ※ RAID 1 ▪ For building RAID Level 1, building time depends on the HDD capacity. (In case of 1TB HDD, it will take 24~48 hours) ▪...
  • Page 30 ※ RAID 5 ▪ For building RAID Level 1, building time depends on the HDD capacity. (In case of 1TB HDD, it will take 24~48 hours) ▪ Check the status on [RAID STATUS] and [RATE]. Wednesday, February 29, 12...

  • Page 31: Monitor

    5.1.4 MONITOR ▪ RESOLUTION : Select the resolution for connected monitor. ▪ VIDEO OUT : Select main monitor. (MAIN–VGA / AUX-BNC Monitor) (Fix the screen by connected monitor) ▪ OSG OUT : Select the monitor for menu scree to display. ▪...

  • Page 32: Accout

    5.1.5 ACCOUNT ※ Add / delete any user and give permission freely. ※ When add new user, have to input new password. When delete use, confirm again. NOTE: ( Default ADMIN password is 1111 ), Initial user name can be modified but can not delete. CAUTION: Default Admin account must not be deleted before add new user.

  • Page 33: Config

    5.1.6 CONFIG ▪ SLOT : Select the slot to load or save on DVR memory. ※ DEFAULT : Change factory default setting. ▪ DATE : Display the latest saved date. ▪ LOAD : Load the saved data. ▪ SAVE : Save the set data. ▪...

  • Page 34: Shutdown

    5.1.7 SHUTDOWN ▪ RESTART : Restart the DVR. ▪ SHUTDOWN : Shutdown the DVR. Wednesday, February 29, 12...

  • Page 35: Camera Setup

    5.2 CAMERA SETUP In this category, there are Camera, PTZ, Spot, Sequence and Private Zone setting. Select the [CAMERA] Menu. 5.2.1 CAMERA ▪ CAMERA LABEL : Select the camera label of live screen. (ALL / NUMBER / NAME / OFF) ▪...

  • Page 36: Ptz

    5.2.1 CAMERA If select the camera name, the virtual keyboard will be appeared. Max camera name should be less than 11 character. [Virtual Keyboard] 5.2.2 PTZ [PTZ] ▪ PORT : Select the Baud Rate for using PTZ camera. ▪ ID : Select the ID for using PTZ camera. ▪...

  • Page 37: Spot

    5.2.3 SPOT CAMERA : Select the camera for display on spot monitor. DEFAULT : Select the camera for display on spot monitor when sequence is off. SEQUENCE : Select On/Off for sequence screen. INTERVAL : Select the interval time to move next channel. The max value is 256 sec. POPUP : Select On/Off for pop-up screen when event is occurred.

  • Page 38: Sequence

    5.2.4 SEQUENCE PAGE DWELL TIME : Select the dwell time to move next channel. CAMEO DWELL TIME : Select the dwell time for CAMEO sequence. NOTE: CAMEO sequence means selected camera is rotated in select cameo of division screen. Camera image which is shown on the other CAMEO of division screen is not included in CAMEO sequence.

  • Page 39: Private Zone

    5.2.5 PRIVATE ZONE ▪ ZONE ENABLE : Select On/Off to use. (LIVE mode/ SEARCH mode) ▪ ZONE COLOR : Select the color to hide. ▪ ZONE : Select the zone to hide. (When select the ZONE button, the camera image will be appeared. NOTE : Move the blue dot to a desired location and press the OK button.

  • Page 40: Ip Camera

    IP CAMERA ▪ MODEL : Select the IP camera model. ▪ ADDRESS : Input the IP address that is set on IP camera. (Regarding the IP setup, refer to the IP camera manual.) ▪ URL : Input the URL for RTSP by the IP camera model. ▪...
  • Page 41 [ETHERNET2] : Network for IP camera (LAN 1~4) ▪ DYNAMIC IP : Set to OFF. ▪ IP ADDRESS : Input the IP address that it should be same network class. ▪ SUBNET MASK : Input the subnet mask. ※ NOTICE※ IP Address should be inputted same IP class as IP camera.

  • Page 42: Event Setup

    5.3 EVENT SETUP In this menu, there are Motion, Alarm in, Video Loss, System and Display setup. Select the [EVENT] menu. 5.3.1 MOTION [INPUT] ▪ ACTIVE : Select On/Off to activate motion. ▪ LEVEL : Select the sensitive for motion trigger. (Select 1 to 5 level) ▪...
  • Page 43 ▪ AREA SETUP In the Area setup, the Red square is shown at the left top side of the screen. If select the OK button, the dot color will be changed to Green. A motion area can be selected by the direction buttons. NOTE : When the status is Red square, can move any direction to select.
  • Page 44 [ACTION] ▪ RECORD : Select the channel for record. ▪ ALARM : Select On/Off for alarm. ▪ BUZZER : Select On/Off for buzzer. ▪ PRESET : Set the preset number. (When motion is triggered, the PTZ camera move to the set preset number position) ▪...

  • Page 45: Alarm In

    5.3.2 ALARM IN TIP: If select the ACTIVE+ / TYPE+ menu, can change all settings at once. [INPUT] ▪ ACTIVE : Select On/Off to activate alarm. ▪ NAME : Type any name. ▪ TYPE : Select the alarm type. (NO : Normal Open / NC : Normal Close) [ACTION] ▪...

  • Page 46: Video Loss

    5.3.3 VIDEO LOSS TIP: If select the ACTIVE+ menu, can change all setting at once. [INPUT] ▪ ACTIVE : Select On/Off to activate. [ACTION] ▪ RECORD : Select On/Off for record. ▪ ALARM : Select On/Off for alarm. ▪ BUZZER : Select On/Off for buzzer. ▪...

  • Page 47: System

    5.3.4 SYSTEM [SMART] ▪ SMART WARNING : Select the option for smart warning. (POPUP + BUZZER / POPUP / OFF) ▪ CHECK INTERVAL : Select the check interval time. (Select 1 hour to 24 hour) ▪ TEMP. THRESH : Select the warning temperature. (C: 0 to 100 / F : 32 to 212) ▪...

  • Page 48: Display

    5.3.5 DISPLAY ▪ DISPLAY : Select display time by second. (Select 0 to 100) ▪ EVENT MESSAGE : Select On/Off to display event message. ▪ EVENT POPUP : Select On/Off to pop-up. Wednesday, February 29, 12...

  • Page 49: Record Setup

    5.4 RECORD SETUP In this menu, there are Resolution, Schedule, Record, Audio, Manual, Filter setup. Select the [RECORD] menu. 5.4.1 RESOLUTION ▪ RESOLUTION : Select the resolution by each channel. (STD=CIF / HIGH=Half D1 / HIGHEST=D1) Wednesday, February 29, 12...

  • Page 50: Schedule

    5.4.2 SCHEDULE ▪ SETUP MODE : Select the record schedule. (TYPICAL / CUSTOM) [TYPICAL] ▪ DAY TIME : Select the day time. (The night time is changed automatically according to the day time zone) ▪ WEEKEND : Set the weekend zone. [CUSTOM] ▪...

  • Page 51: Record

    5.4.3 RECORD [DAY] / [NIGHT] / [WEEKEND] ▪ TIME : Set the recording frame and resolution by channel. ▪ EVENT : Set the event recording. (Frame / Resolution / Post recording time [5 to 100 second]) TIP : The frame can be set by the direction button in setup screen. If set to [Typical] in [SCHEDULE] menu, the DAY / NIGHT / WEEKEND menu will be changed to REC0/ REC1 / REC2.

  • Page 52: Audio

    5.4.4 AUDIO ▪ ARCORD : Select On/Off for audio recording by channel. TIP: If select the RECORD+ menu, can change all setting at once. 5.4.5 MANUAL ▪ SPEED : Select the recording frame by each channel. ▪ Quality : Select the resolution by each channel. ▪...

  • Page 53: Filter

    5.4.6 FILTER ▪ FILTER : Select On/Off for day and night. Although record is set by continuous recording, If there is no movement, DVR do not record. Wednesday, February 29, 12...

  • Page 54: Ethernet Setup

    5.5 ETHERNET SETUP In this menu, there are Network, Serial, DDNS, E-mail setup. Select the [ETHERNET] menu. 5.5.1 NETWORK [ETHERNET] ▪ DYNAMIC IP : Select On/Off for dynamic IP. If Dynamic IP is OFF, DVR get IP address from router automatically. ▪...
  • Page 55 [ETHERNET2] : Network for IP camera (LAN 1~4) ▪ DYNAMIC IP : Set to OFF. ▪ IP ADDRESS : Input the IP address that it should be same network class. ▪ SUBNET MASK : Input the subnet mask. ※ NOTICE※ IP Address should be inputted same IP class as IP camera.
  • Page 56 5.5.1 NETWORK [CLIENT] ▪ CLIENT ACCESS : Select client access options. ( ALL / RANGE ) ▪ BEGIN ADDRESS / END ADDRESS (When select RANGE option, type the IP address to accept) : Input the acceptable IP address. ▪ SMS PORT (TCP) : Select SMS port. ▪...

  • Page 57: Serial

    5.5.2 SERIAL [RS-232 INPUT SETUP] ▪ SERIAL TYPE : Select external device. ▪ MODEL : Select the protocol to use. ▪ PORT : Select the Baud Rate / DATA bit / Parity / Stop Bit. [RS-485 INPUT SETUP] ▪ SERIAL TYPE : Select external device. ▪...

  • Page 58: Ddns

    5.5.3 DDNS ▪ DDNS SERVER : Select DDNS server. (Ddnsdvr.com / Dyndns.com / ChangeIP.com) ▪ HOST NAME : Input the host name from the registered on DDNS server. ▪ USER NAME : Input the user name from the registered on DDNS server. ▪...

  • Page 59: E-Mail

    5.5.4 E-MAIL [ADDRESS] ▪ SEND E-MAIL : Select On/Off for use. ▪ SCHEDULE : Set the usage time. (From : Start time / To : End time) ▪ E-MAIL ADDRESS : Input the E-mail address to receive. [SERVER] ▪ MAIL SERVER : Select the mail server. (SMTP server / DVR System) ▪...

  • Page 60: System Setup

    5.6 SYSTEM SETUP In this menu, there are System Log, Status, Version. Select the [SYSTEM] menu. 5.6.1 SYSTEM LOG ▪ Check the system log by the left, right direction button. Wednesday, February 29, 12...

  • Page 61: Status

    5.6.2 STATUS [DISK] ▪ Display HDD Status. ▪ CHECK SMART NOW : Check the smart. ▪ SMART INFORMATION : Show the smart information. [RECORD] ▪ Display RECORD Status. Wednesday, February 29, 12...

  • Page 62: Version

    5.6.2 STATUS [AUDIO] ▪ Display AUDIO Status. 5.6.3 VERSION ▪ Display DVR version and information. Wednesday, February 29, 12...

  • Page 63: Search

    6. SEARCH On the Top menu, select the [SEARCH] menu. After select the menu, the following Log-in window will be appeared. Enter the password by the key buttons and press the ENTER button. (The default password : 1111) ▪ QUICK SEARCH : Search by date, hour, minutes in detail. ▪...

  • Page 64: Search Screen

    6.1 Search Screen Configuration Execution Information Message Camera Name Search Information Icon Search Icon Search Screen Repeat Time Information Screen Expand/ Reduction Window Backup Progress (%) Recorded Audio Search Date/Time Information Icon 6.1.1 Search Menu When mouse cursor is placed over on the bottom side, the Search menu is appeared. Division Screen Play 1 frame backward Fast forward play...

  • Page 65: Quick Search

    6.1.2 CALENDAR SEARCH a. Select the data by the direction button. - Recorded data is displayed the orange color. b. Select the time by the direction button. - After select hour, minutes will be appeared. NOTE: The time graph color is different by the recording mode. Continuous Recording = Blue, Audio Recording = Light Blue, Event Recording = Red.

  • Page 66: Event Search

    6.1.3 EVENT SEARCH ▪ DATA : Select Date to search. ▪ MOTION : Select On/Off event for search. ▪ ALARM IN : Select On/Off event for search. ▪ VIDEO LOSS : Select On/Off event for search. ▪ SELECT CAMERA : Select the camera for search. ▪...

  • Page 67: Overlapped List

    6.1.4 OVERLAPPED LIST ▪ If user change the time or applied DST (Daylight Saving Time), there will be overlapped data. ▪ After select the list, if select the [PLAY] button, can search [QUICK SEARCH] or [EVENT SEARCH]. Wednesday, February 29, 12...

  • Page 68: Panorama Search

    6.1.5 PANORAMA SEARCH ▪ During normal search, press the [PANORAMA] button. ▪ By mouse, click the right mouse button and click the [PANORAMA] Search. ▪ Playback with frame by frame. 6.1.6 SMART SEARCH ▪ During normal search, press the [SMART] button. ▪...

  • Page 69: Section Repeat Search

    6.1.7 SECTION REPEAT SEARCH ▪ During normal search, press the [LOCK] button. When press one time, the start position is set, press one more time, the end position is set. ▪ By mouse, click the below red circle button. ▪ Only playback the set section repeatedly. ▪...
  • Page 70 ※ Button Explanation in Search mode ▪ Remote Controller or Front button Button Explanation Display the [SEARCH] menu. SEARCH Cancel the Search mode or return to the live screen. ENTER Select the CAMEO menu. FAST REVERSE When reverse play, up and down play speed. When forward play, up and down play speed.

  • Page 71: Backup

    7. BACKUP On the Top menu, select the [BACKUP] menu. After select the menu, the following Log-in window will be appeared. Enter the password by the key buttons and press the ENTER button. (The default password : 1111) ▪ TARGET : Select the device to backup. (USB / DVD) ▪...

  • Page 72: Play With Backup Data

    7.1 Play with backup data ▪ After backup, the DVR Player is copied with data. ▪ Backup data only can be played on DVR Player at PC. ▪ Can export to JPEG still shot. Wednesday, February 29, 12...

  • Page 73: Appendix

    8. APPENDIX 8.1 Firmware Upgrade Copy the firmware on USB and connect on the Memory Stick USBA (Up) port. ※ The USB should be connected on USB A (Up) port otherwise can not upgrade. For upgrade, restart the DVR. After restart, when upgrade window is appeared, select the START button.

  • Page 74: Web Client

    8. APPENDIX 8.2 Web Client ※How to connect For using web connection through internet, 7000 and 80 ports should be set as port forwarding at the Router. 1. To connect Web viewer, the [Ethernet] setup on DVR is required firstly. 2.

  • Page 75: Web Viewer Functions

    8.2.1 Web viewer Functions Division screen Connect Disconnect Control Zoom In Brightness control Contrast control Zoom Out SEARCH ALARM Open data Exit Search Wednesday, February 29, 12...

  • Page 76: Specification - Dt Series

    8. APPENDIX 8.3 Specification – DT Series Model Model DT-1600 DT-800 Performance Performance PENTAPLEX PENTAPLEX Display Speed (NTSC / PAL) Display Speed (NTSC / PAL) 480 / 400 fps 240 / 200 fps CIF (352*240)/(352*288) 480 / 400 fps 240 / 200 fps...

  • Page 77: Specification - Mt Series

    8. APPENDIX 8.4 Specification – MT Series Model Model Model MT-1600 MT-800 MT-800 MT-400 Performance Performance Performance PENTAPLEX PENTAPLEX PENTAPLEX PENTAPLEX Display Speed (NTSC / PAL) Display Speed (NTSC / PAL) Display Speed (NTSC / PAL) 480 / 400 fps 240 / 200 fps 120 / 100 fps 120 / 100 fps...

  • Page 78: Trouble Shooting

    8. APPENDIX 8.5 Trouble Shooting SYMPTOM MEASURES If the power LED is not lighted, check the below items. - Check the power plug and outlet. (Refer to the [Cautions for No Power safety] - Connect the power cord to the power connector of DVR properly. - Connect the camera cable to the DVR port properly.
  • Page 79 - Check the battery polarity. - Check the remote controller ID. (Refer to the [Remote Controller Configuration]) Not work remote controller - Focus on the remote controller to the IR sensor. - Use the remote controller within 7 meters from DVR. - Change the battery.
  • Page 80 Wednesday, February 29, 12...

This manual is also suitable for:

Dt-800Mt-400Mt-1600Mt-800

Table of Contents