Advertisement
Quick Links
Advertisement
Summary of Contents for ANSR HALO
- Page 1 INSTRUCTION MANUAL...
- Page 2 WELCOME ANSR: HALO™ is a beautifully simple answer for reducing the signs of aging. ANSR: HALO™ light therapy treatment uses the latest generation of LED technology and specific wavelengths of red and infrared light. These combined wavelengths of light reduce the appearance of fine lines, wrinkles, and discoloration, while helping to even out skin texture and tone.
-
Page 3: Important Safeguards
• Do not place in or drop into water or other liquid. • Do not reach for an ANSR: HALO™ if it has fallen into water while you are recharging the device. Unplug immediately. - Page 4 • Never attempt to open or repair the device or charger. There are no user-serviceable parts inside the ANSR: HALO™. Doing this could result in a serious eye or skin injury or possibly fatal electric shock. • Use this device only for its intended use as described in this manual.
- Page 5 Two lights = about 2/3 battery life. One light = 1/3 or less battery left. POWER JACK PORT is where you plug in the power adapter for charging. The ANSR: HALO will not operate while plugged into an electrical outlet.
-
Page 6: Getting Started
Charge ANSR: HALO fully, until all three white indicator lights are illuminated. This will take approximately two hours. Unplug the device once it is fully charged. The ANSR: HALO will not operate while plugged into an electrical outlet. ACTIVATING THE LIGHT • For best results, wash your face carefully with a... -
Page 7: Using The Light
You will feel ANSR: HALO vibrate while the device is operating. USING THE LIGHT • Place the lens in direct contact with your skin and gently move back and forth in a slow, patterned motion over your entire face. - Page 8 • Plug the AC/DC power adapter jack into the Fully Charged bottom of the ANSR: HALO and into an electrical outlet. Charge the device fully. Three white lights will illuminate to indicate the device is fully charged. This will take approximately two hours.
-
Page 9: Troubleshooting
IF ANSR: HALO WILL NOT TURN ON: TROUBLESHOOTING The battery may not be charged. Charge the device You should reset your ANSR: HALO if one of these things for two hours or until all three white indicator lights is happening: • The vibrator is operating without the red light operating... - Page 10 ANSR:’s entire liability for any defective product shall in no event exceed the purchase price for the Your ANSR: HALO is warranted to be free from defect in defective product. material and workmanship for a period of one year under This warranty does not cover products determined by ANSR: normal use, after its original purchase date.
- Page 11 ANSR: SHALL NOT BE RESPONSIBLE FOR ANY ANSR: HALO INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES Model Number ANSR: HALO RESULTING FROM THE USE OF THIS PRODUCT. ALL Output Type Red LED 632nm / Infrared LED 850nm IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED...
- Page 12 F to 104 F (0 C to 40 Operating Humidity 20 to 80% RH non-condensing 14 o F to 158 o F (10 o C to 70 o C) Storage Temperature Product P/N: ANSR: PO Box 10087 Portland, OR USA 97296...
- Page 13 B E MO RE EN LIG HT EN ED A T A N SR . CO M...
Need help?
Do you have a question about the HALO and is the answer not in the manual?
Questions and answers
what does the charger look like?
The ANSR HALO charger is an AC/DC power adapter with model number EPS050100-P12-C1. It has an input power of 110 to 120 VAC at 50 to 60 Hz and an output of 5 VDC at 1 Amp. The charger case size is 63 mm long, 26.8 mm wide, and 42 mm high, and it weighs 76 grams.
This answer is automatically generated
HOW DO I GET A REPLACEMENT CHARGER
Contact ANSR at (877) 211-2677 for repair or replacement. If outside North America, contact your local distributor.
This answer is automatically generated