Attaching The Flash Unit To The Lens - Canon Macro ring lite MR-14EX II Instruction Manual

Attaching the Flash Unit to the Lens

Attach the flash unit to the front of the macro lens.
Attaching the Lens Cap
Attach the provided lens cap to the flash unit when it is not used in order
to protect the lens.
Be sure to attach the flash unit to the lens when shooting. Shooting while
holding the flash unit in your hand may result in a low temperature burn.
Do not touch the flash unit or batteries immediately after continuous flash
firing or modeling flash (p.23). Touching them may result in a burn. Make
sure that the flash unit has cooled before detaching the flash unit or
replacing batteries.
When using the following lenses, attach the Macrolite Adapter (sold
separately) to the front of the lens (filter thread) and then attach the flash
unit.
• EF100mm f/2.8L Macro IS USM: Macrolite Adapter 67
• EF180mm f/3.5L Macro USM: Macrolite Adapter 72C
16
Attach the flash unit to the front
of the lens while holding down
the release button.
Make sure that the flash unit is
securely attached.
When rotating the flash unit, lightly
press the release button while
rotating it.
Detach the flash unit while holding
down the release button.
A 67 mm diameter filter can also be
attached to the flash unit (p.17).