Philips CE138 User Manual page 17

Use alternate frequencies
If the signal of an RDS station is poor, enable
the AF (Alternate Frequency) function to search
for another station that broadcasts the same
program.
1
Press and hold
menu.
2
Press / repeatedly until [AF ON] or
[AF OFF] is displayed.
3
Rotate to select a setting.
‡ [AF ON]: Enable the AF function.
‡ [AF OFF]: Disable the AF function.
Set the region for AF tuning
You can set the region for AF tuning.
1
Press and hold
menu.
2
Press / repeatedly until [REG ON]
or [REG OFF] is displayed.
3
Rotate to select a setting.
‡ [REG ON]: Only RDS stations in
current region can be tuned to
automatically.
‡ [REG OFF]: All RDS stations can be
tuned to automatically.
5HFHLYH WUDIÀF DQQRXQFHPHQW
,I \RX ZDQW WR UHFHLYH WUDIÀF DQQRXQFHPHQW
HQDEOH WKH 7$ 7UDIÀF $QQRXQFHPHQW IXQFWLRQ
1
Press and hold
menu.
2
Press / repeatedly until [TA ON] or
[TA OFF] is displayed.
3
Rotate to select a setting.
‡ [TA ON] :KHQ D WUDIÀF
announcement is on air, the system
automatically switches to the tuner
mode and begins to broadcast the
WUDIÀF DQQRXQFHPHQW :KHQ WKH WUDIÀF
announcement is over, the system
returns to the previous mode.
‡ [TA OFF] 7UDIÀF DQQRXQFHPHQW GRHV
not cut in.
to access the system
to access the system
to access the system
Tip
‡
:KHQ D WUDIÀF DQQRXQFHPHQW FXWV LQ \RX FDQ SUHVV
to switch the system to the previous mode.
Synchronize the system clock
You can synchronize the system clock with an
RDS station that transmits time signals.
1
Press and hold
menu.
2
Press / repeatedly until [CT ON]
or [CT OFF] is displayed.
3
Rotate to select a setting.
‡ [CT ON]: Synchronize the
system clock with the RDS station
automatically.
‡ [CT OFF]: The automatic clock
synchronization with RDS station is
disabled.
Tip
‡
The accuracy of time depends on the RDS station that
transmits time signals.
to access the system
EN 15