Standard Digital Converter Box Quick Start Guide 4818-StdBox-QuikStrt-LclOldremot1 1 5/22/07 4:00:02 PM...
Page 2
IMPORTANT: You must call to activate your equipment. Complete steps 1-3 first, then follow instructions in Step 4. Included in your self-installation kit: • Motorola Digital Converter Box • Synergy Remote Control • Power cord • 6-foot coax jumper cable •...
Page 3
The Motorola DCT700 Converter Box Front Panel* Back Panel* Item Description A: Audio out Left/right audio outputs to connect the DCT700 to a TV, VCR, or A/V receiver Video out Composite video output to connect the DCT700 to a TV, VCR, or A/V receiver...
Page 4
Installing Your Converter Box Box Location Place the converter box on a sturdy surface near your television and the cable outlet. IMPORTANT: The box needs at least 2 inches of space on all sides to allow ventilation and avoid overheating. Ventilation space 2-inch space 2-inch space...
Page 5
Step 1: Connect Box to TV Basic coax cable connection: Use the coax cable jumper that came in your shipment to connect the “to TV/VCR” on the back of the box to the “Cable In” on your TV. It is also possible to add a VCR or DVD player to your connection: 4818-StdBox-QuikStrt-LclOldremot5 5 5/22/07 4:01:23 PM...
Page 6
Installing Your Converter Box Step 1: Connect Box to TV (continued) For higher quality sound and picture, use With a VCR or DVD player: an RCA audio/video cable to connect the box to your TV. Step 2: Connect Box to Cable Connect the coax cable that is coming from a wall outlet to the “Cable In”...
Page 7
Step 3: Plug in the Box Using the power cord included in your shipment, plug the converter box into a standard electrical outlet. THE YELLOW POWER LIGHT ON THE FRONT OF THE BOX WILL FLASH ON AND OFF VERY QUICKLY. USE THE CABLE BUTTON ON THE REMOTE CONTROL TO TURN THE BOX BACK ON AND CONTINUE TO STEP 4.
Need help?
Do you have a question about the Motorola DCT700 and is the answer not in the manual?
Questions and answers